Determination of sulphur in fly ash by instrumental proton activation analysis

A method for the determination of sulphur in fly ash by instrumental proton activation analysis using the³⁴S/p,n/^34mCl reaction was developed. The 2128.5 keV and 3305.0 keV -rays of^34mCl /t=32.0 min/ were measured on a Ge/Li/ -spectrometer, shielded with a lead absorber to attenuate low energy -rays. Irradiation and measuring conditions were optimized. The detection limit for instrumental analysis is 0.3 to 1 mg g^–1 and the standard deviation is cca. 4% for a typical sample.     

516—Synthetic and biological membranes

Biological cell membranes are compared to artificially produced permselective membranes. In spite of the difference in their thickness and electric resistance it is shown that they are similar in many important aspects, and the behaviour of synthetic membranes can explain very many points in the behaviour of cell membranes, especially axons. It is stressed that it is seldom necessary to assume unproven channels in biological membranes which are specific in the transport of a single ion species. Most of the phenomena of selectivity, opening and closing of such membranes can be explained by the influence of pH on membrane sites, by their poisoning with higly charged and/or large counter-ions. The borderline between two oppositely charged regions of a mosaic membrane opens up because it can be traversed by both positive and negative ions and permselectively is lost. Bipolar membranes rectify the current. Amphoteric membranes undergo very complex changes in conducting properties and permselectively with pH, especially when allowance is made for the weakly dissociated sites contained within these membranes. It is suggested that black lipid membranes made in the laboratory could be used to elucidate new points of similarity if they were used under similar conditions to our technical membranes.     

The effect of grass fiber filler on curing characteristics and mechanical properties of natural rubber

Natural rubber is reinforced with a novel type of grass fiber (Cyperus Tegetum Rox b). The effects of fiber loading of different mesh sizes on curing characteristics and mechanical properties of grass fiber filled natural rubber composite are studied. Since 400 mesh grass fiber loaded natural rubber composite shows superior mechanical properties, therefore the effect of silane coupling agent was studied for this particular composite. Here composites were prepared by using water leached grass fiber. Optimum cure time increases with the increase in fiber loading but the change in scorch time is less. The same trend of increase in optimum cure time is observed in the presence of Si69. But the value is higher compared to that of rubber composite without Si69. With increase in the fiber loading, modulus and hardness of the composite increases but tensile strength decreases. The mechanical properties of the composite, namely moduli at 200 and 300% elongation and hardness increase in the presence of Si69 but tensile strength is less compared to that of the composite without Si69. Elongation at break is not much affected due to the presence of Si69. Copyright © 2004 John Wiley & Sons, Ltd.     

Luminescent Sensing with Quantum Dots

Summary This review highlights recent advances in the use of quantum dots (QD’s) as luminescent sensors. The bulk of the study concentrates on systems that possess organic ligands bound to the surface of QD’s. These ligands vary from low molecular weight thiols to larger molecules such as maltose binding protein. All have one thing in common: when a target analyte binds to the ligand/receptor, a perturbation of the system occurs, that registers itself as a change in the luminescence intensity of the QD. Two main mechanisms are prevalent in controlling the luminescent intensity in such systems. The first is Photoinduced Electron Transfer (PET) and the second energy transfer. This review looks at current sensors that operate by using these mechanisms. Two component systems are also investigated where a quencher is first added to a solution of the QD, followed by addition of the target analyte that interacts with the quencher to influence the luminescence intensity.     

Synthesis of 3-carbomethoxy-3,4-dialkylcyclohexanones

The uncatalyzed 1,4-addition of phenylmagnesium bromide and furylmagnesium iodide to methyl 5-methoxy-1,5-cyclohexadienylcarboxylate ($\text{1}$), directly followed by alkylation and hydrolysis leads to the corresponding cyclohexanones of type $\text{2}$ (R₁ and R₂ trans) in moderate to high yield.     

Synthesis of coumarins by ring-closing metathesis using Grubbs’ catalyst

A novel generally applicable synthesis of coumarins from phenolic substrates utilizing ring-closing metathesis is described. This sequence involves O-allylation of phenols followed by ortho-Claisen rearrangement, subsequent based-induced isomerization affording 2-(1-propenyl)phenols, acylation with acryloyl chloride, and finally ring-closing metathesis (RCM) with Grubbs’ second generation catalyst.     

Cluster Build-up Reactions using Di-gold Cationic Fragments: Synthesis and Structural Characterization of [Os7(CO)19(Au2dppm)]

The reaction of the di-gold cation [Au₂(dppx)]²⁺ with the heptanuclear cluster dianion [Os₇(CO)₂₀]^2– affords the mixed metal cluster [Os₇(CO)₂₀{Au₂(dppx)}] (x=m (1), e (2), b (3)). On standing, in solution, this complex undergoes decarbonylation to give the cluster [Os₇(CO)₁₉{Au₂(dppx)}] (x=m (4), e (5), b (6)). The complexes have been characterised spectroscopically, and an X-ray structure determination of the dppm derivative shows that it contains a metal core based on an Os₇ edge-bridged bicapped tetrahedron with the two ₃-Au atoms capping adjacent triangular Os₃ faces of the central tetrahedron. In an analogous reaction, the carbido anion [Os₇(H)C(CO)₁₉]^– affords the neutral cluster [Os₇C(CO)₁₉{Au₂(dppm)}] (7) when treated with [Au₂(dppm)]²⁺ in the presence of base.     

Relations entre structure chimique et grandeurs de retention. VII. Composés de structure cyclopropanique

Résumé Les auteurs ont étudié le comportement chromatographique sur plusieurs phases stationnaires polaires et non polaires de composés cyclopropaniques stéréoisomêres: où R=H ou CH₃ et X=CH, COOCH₃ ou CH₂OH. Les résultats sont interprétés en fonction de la configuration de X par rapport à , de la nature électronique de X et de l'orientation du phényle par rapport au plan du cyclopropane.

---

Relationship between chemical structure and retention. VII. Cyclopropane compounds

Summary The chromatographic behaviour, on several polar and non polar phases, of stereoisomeric cyclopropanes has been studied R=H or CH₃ and X=CN, COOCH₃, CH₂OH. The results are interpreted in terms of the X versus configuration, the electronic nature of X and the orientation of the phenyl ring in relation to plane of the cyclopropane ring.

     

Synthesis of 6R(β)-tritylaminopenicillanic-3R(β)-alcohol,a versatile stereoisomer of natural β-lactams

In an attempt to rationalize a synthesis of penicillin analogs modified at C(3), we have isolated the 3R(β)-carbinolamide derivative 4a. The trityl substituent on N(6′) seems to be responsible for the inversion of configuration which occurs at C(3) during the acid hydrolysis of the isocyanate intermediate. An hydrogen bond is formed on the β-face of the bell-shaped bicyclic skeleton between the N(6′)-nitrogen lone pair and the C(3) hydroxyl group. On standing, the carbinolamide analog slowly isomerizes to its expanded bicyclic isomer 4b , but the starting material may be easily recovered by treatment with acid. The postulated intermediate during isomerization, i.e., the open aldehyde form, does not accumulate. Substitutions of the hydroxyl group at C(3) lead to a variety of compounds with the biologically active 3S(α) configuration. These may be used to study the importance of the carboxyl group of penicillins in their interaction with β-lactamases at the molecular level.     

Isolation of pure (2S,1'S,2'S)-2-(2'-carboxycyclopropyl)glycine from Blighia sapida (Akee)

The isolation of (2S,1'S,2'S)-2-(2'-carboxycyclopropyl)glycine (CCG I, 2) from Blighia sapida (Akee) was achieved through column chromatography on deactivated silica gel followed by ion-exchange chromatography. A HPLC method has also been devised in order to assess the purity of the isolated product.