MALDI-TOF mass spectrometric determination of intact phospholipids as markers of illegal bovine milk adulteration of high-quality milk

In the dairy industry one of the most common frauds is mixing high-value milk (sheep’s and goats’) with milk of lower value (cows’). This illegal practice has commercial, ethical, and serious sanitary consequences because consumers can be exposed to hidden allergens contained in the undeclared cows’ milk. Here, we investigated the possibility of using matrix-assisted laser-desorption/ionization (MALDI)-time of flight (TOF) mass spectrometry (MS) as a rapid, sensitive, and accurate technique for detection of milk adulteration by analysis of phospholipid profiles. Lipid extracts of pure raw milk, commercial milk, and binary mixtures of cows’ and goats’ milk and cows’ and sheep’s milk (the concentrations of each milk varied from 0 % to 50 %) were analyzed with α-cyano-4-chlorocinnamic acid as matrix. The abundance ratio of the ions at m/z 703 and m/z 706 was found to be species-correlated and was used as marker of cows’ milk in sheep’s and goats’ milk. Furthermore, the procedure could potentially be applied to cheese samples, because peaks at m/z 703 and 706 were also found in several commercial cheese samples. This approach proved to be an efficient, rapid, and inexpensive method of detecting milk fraud.

A comparison of four protocols for the immobilization of an aptamer on graphite composite electrodes

We have performed a comparative study on four protocols for the immobilization of the thrombin aptamer on a graphite-epoxy composite electrode with the aim to identify the most practical method for designing the corresponding impedimetric aptasensor. The protocols included (a) physical adsorption, (b) avidin-biotin affinity interaction, (c) electrochemical activation and covalent bonding via amide groups, and (d) electrochemical grafting using 4-carboxybenzenediazonium coupling. The properties of the sensing surface were probed by electrochemical impedance measurements in the presence of the (ferri/ferro)hexacyanide redox couple. An increase in the interfacial charge transfer resistance (R_ct) was noted in all cases after the aptamer-thrombin interaction had occurred. The selectivity of the aptasensor over common serum proteins was also systematically investigated. Physical adsorption resulted in the lowest detection limit of the probe (4.5 pM), while avidin-biotin interaction resulted in highest selectivity and reproducibility exhibiting a 4.9 % relative standard deviation at pM thrombin concentration levels.

Synthesis of 2,6-diaryl-1,2-dihydropyridines through a 6π-electrocyclization of N-sulfonylazatrienes

The development of an efficient synthetic method toward substituted 1,2-dihydropyridines from cinnamylideneacetophenones is reported. The key intermediates N-sulfonylazatrienes were synthesized through a TiCl₄-mediated direct condensation of primary sulfonamides with the substituted (E,E)-cinnamylideneacetophenones. The 6π-electrocyclization of these intermediates, catalyzed by a Lewis acid, selectively afforded the desired products in good yields.     

Dihydrobiphenylenes through Ruthenium‐Catalyzed [2+2+2] Cycloadditions of ortho‐Alkenylarylacetylenes with Alkynes

A new synthetic route to dihydrobiphenylenes has been developed. The process involves a mild Ru^II‐catalyzed [2+2+2] dimerization of ortho‐alkenylarylacetylenes or its more versatile variant, the Ru‐catalyzed [2+2+2] cycloaddition of ortho‐ethynylstyrenes with alkynes. Mechanistic aspects of this [2+2+2] cycloaddition are discussed.     

Analysis of cerebrospinal fluid γ‐aminobutyric acid by capillary electrophoresis with laser‐induced fluorescence detection

The measurement of γ‐aminobutyric acid (GABA) is suitable for investigating various neurological disorders. In this study, a sensitive and selective method for free GABA quantification in cerebrospinal fluid (CSF) has been standardised. This method is based on CE with LIF detection using 4‐fluoro‐7‐nitrobenzo‐2‐oxa‐1,3‐diazole (NBD‐F) as a derivatisating agent. The reaction conditions (NBD‐F concentration, pH, temperature and reaction time) and the electrophoretic parameters (run buffer composition and pH and separation voltage) were optimised to obtain the maximum derivatisation efficiency and electrophoretic resolution. The best resolution was obtained using 200 mM sodium borate, 10 mM SDS, 8.5 mM β‐CD, pH 10 and 20 kV voltage. The method was linear in the concentration range of 2.5–1000 nM with good inter‐ and intra‐assay precision values. The effects of CSF handling on free GABA concentrations were also evaluated. Our results show that the time delay between CSF collection and freezing strongly increases the CSF GABA values. Age‐related reference values were established in 55 paediatric controls. The influence of antiepileptic therapy on free CSF GABA was studied in 38 neuropaediatric patients. Significantly, higher GABA values were obtained in patients taking valproic acid or vigabatrin therapy, which are antiepileptic drugs that modulate GABA metabolism.     

Magnetic nanoparticles coated with polysaccharide polymers for potential biomedical applications

This study reports a two-steps route for obtaining magnetic nanoparticles–polysaccharide hybrid materials consisting of Fe₃O₄, NiFe₂O₄ and CuFe₂O₄ nanoparticles synthesis by coprecipitation method in the presence of a soft template followed by coating of ferrite nanoparticles of 8–10-nm size range with polysaccharide type polymers—sodium alginate or chitosan. Magnetic oxide nanoparticles and the corresponding hybrid materials were characterized by X-ray diffraction (XRD), Mössbauer spectroscopy, atomic absorption spectroscopy (AAS), FTIR spectroscopy, scanning and transmission electron microscopy (SEM and TEM) and specific surface area measurements. The vibrating sample magnetometry confirms the superparamagnetic properties of the synthesized ferrites and hybrids. Using this route, the percent of magnetic nanoparticles retained in chitosan-based hybrid materials is nearly double in comparison with that of sodium alginate–based materials. The biological activity tests on Escherichia coli ATCC 25922, Pseudomonas aeroginosa ATCC 27853, Staphylococcus aureus ATCC 25923 and Candida scotti microorganisms show the non-toxic properties of prepared hybrid materials.     

Effect of aqueous and ethanolic extracts from pinhão coats on the properties of corn and pinhão starches

Journal of Thermal Analysis and Calorimetry - The Araucaria angustifolia seed, named pinhão, has a high content of carbohydrates, and it is considered an unconventional starch source. Its...     

Antiproliferative Homoleptic and Heteroleptic Phosphino Silver(I) Complexes: Effect of Ligand Combination on Their Biological Mechanism of Action

A series of neutral mixed-ligand [HB(pz)₃]Ag(PR₃) silver(I) complexes (PR₃ = tertiary phosphine, [HB(pz)₃]⁻ = tris(pyrazolyl)borate anion), and the corresponding homoleptic [Ag(PR₃)₄]BF₄ compounds have been synthesized and fully characterized. Silver compounds were screened for their antiproliferative activities against a wide panel of human cancer cells derived from solid tumors and endowed with different platinum drug sensitivity. Mixed-ligand complexes were generally more effective than the corresponding homoleptic derivatives, but the most active compounds were [HB(pz)₃]Ag(PPh₃) (5) and [Ag(PPh₃)₄]BF₄ (10), both comprising the lipophilic PPh₃ phosphine ligand. Detailed mechanistic studies revealed that both homoleptic and heteroleptic silver complexes strongly and selectively inhibit the selenoenzyme thioredoxin reductase both as isolated enzyme and in human ovarian cancer cells (half inhibition concentration values in the nanomolar range) causing the disruption of cellular thiol-redox homeostasis, and leading to apoptotic cell death. Moreover, for heteroleptic Ag(I) derivatives, an additional ability to damage nuclear DNA has been detected. These results confirm the importance of the type of silver ion coordinating ligands in affecting the biological behavior of the overall corresponding silver complexes, besides in terms of hydrophilic–lipophilic balance, also in terms of biological mechanism of action, such as interaction with DNA and/or thioredoxin reductase.     

Fast Cyclization of a Proline‐Derived Self‐Immolative Spacer Improves the Efficacy of Carbamate Prodrugs

Self‐immolative (SI) spacers are sophisticated chemical constructs designed for molecular delivery or material degradation. We describe herein a (S)‐2‐(aminomethyl)pyrrolidine SI spacer that is able to release different types of anticancer drugs (possessing either a phenolic or secondary and tertiary hydroxyl groups) through a fast cyclization mechanism involving carbamate cleavage. The high efficiency of drug release obtained with this spacer was found to be beneficial for the in vitro cytotoxic activity of protease‐sensitive prodrugs, compared with a commonly used spacer of the same class. These findings expand the repertoire of degradation machineries and are instrumental for the future development of highly efficient delivery platforms.     

Minimization of Carrier Losses for Efficient Perovskite Solar Cells through Structural Modification of Triphenylamine Derivatives

Three hole transport materials (HTMs) based on a substituted triphenylamine moiety have been synthesized and successfully employed in triple‐cation mixed‐halide PSCs, reaching efficiencies of 19.4 %. The efficiencies, comparable to those obtained using spiro‐OMeTAD, point them out as promising candidates for easily attainable and cost‐effective alternatives for PSCs, given their facile synthesis from commercially available materials. Interestingly, although all these HTMs show similar chemical and physical properties, they provide different carrier recombination kinetics. Our results demonstrate that is feasible through the molecular design of the HTM to minimize carrier losses and, thus, increase the solar cell efficiencies.