The effect of water or salt solution on thin hydrophobic films

Hydrophobic films of polystyrene synthesized in bulk (PS) and by emulsion polymerization in the presence of the cationic surfactant cetyltrimethylammonium bromide (PS-CTAB) or the anionic surfactant sodium dodecyl sulfate (PS-SDS) were characterized by means of ellipsometry, contact angle measurements, and atomic force microscopy. Thin (approximately 65 nm) and thick (approximately 300 nm) films were spin-coated on hydrophilic silicon wafers. PS films presented scarcely tiny holes, while PS-CTAB and PS-SDS films presented holes and protuberances. The former were attributed to dewetting effects and the latter to surfactant clusters. The films were exposed to water or to a 0.1 mol/L NaCl solution for 24 h. Ex situ measurements evidenced strong topographic alterations after the exposure to the fluid. A model based on the diffusion of water (or electrolyte) molecules to the polymer/silcon dioxide interface through holes or defects on the film edges was proposed to explain the appearance of wrinkles and protuberances. In situ ellipsometric measurements were performed and compared with simulations, which considered either a water layer between a polymer and a silcon dioxide layer or an air layer between a polymer and water (medium). In the case of thin PS films, the ellipsometric angles evidenced a very thin (0.5-1.0 nm) air layer between water and the PS films. Upon increasing the PS film thickness, no air layer could be observed by ellipsometry. Regardless of the thickness, the ellipsometric data obtained for PS-CTAB and PS-SDS films did not indicate the presence of an air layer between them and the aqueous media. The dramatic changes in the topography of PS, PS-CTAB, and PS-SDS after immersion in salt solution were explained with proposed models. From a practical point of view, this study is particularly relevant because many hydrophobic polymers are used as substrates for biomedical purposes, where the physiological ionic strength is 0.15 mol/L NaCl.     

Synthesis of fused purinoquinazolines. Three new heterocyclic ring systems

The Ullmann reaction of 8-aminotheophylline or 8-aminocaffeine with 2-chlorobenzoic acid and of 8-bromotheophylline with ethyl-2-aminobenzoate afforded derivatives of three new heterocyclic systems: purino[7,8-α]quinazoline-5,9,11(6H,8H,10H)-trione, purino[8,9-b]quinazoline-2,4,11(1H,3H,5H)-trione and purino[8,7-b]quinazoline-2,4,6(1H,3H,11H)-trione, respectively.     

Hypervirial analysis of enclosed quantum mechanical systems. IV. Further comments

New formal results regarding the hypervirial analysis of enclosed systems are given. Novel applications are presented and several previous equations are reformulated in a more appropriate form.     

V2O5/TiO2 oxidation catalysts, IV. Adsorption of acrolein on sodium-containing systems

Adsorption of acrolein on vanadia/titania catalysts fits a polymerization kinetics if Na–V compounds are not present or the vanadium content is lower than that corresponding to formation of a monolayer of vanadia on the titania support.

---

, Na–V .

     

A fluorimetric study of pindolol and its complexes with cyclodextrins

Spectrofluorimetric characteristics of pindolol have been investigated with the aim of using this technique for analytical determinations. Other monosubstituted indole derivatives, 4-methoxy and 5-methoxyindole, have been also studied for comparative purposes. Corrected excitation and emission wavelengths in different solvents are reported and the effect of solvent on the Stokes shifts of these compounds has been analysed using the Lippert equation. In addition, the Stokes shift of pindolol has been determined in dioxan-water solvent mixtures and the presence of specific solvent effects is discussed. The fluorescence of pindolol is pH dependent, the quantum yields determined in water are lower than those in other solvents. With respect to the sensitivity, it has been found that the detection limits in aqueous solutions are improved in the presence of beta and methyl-beta-cyclodextrin. Finally, a fluorimetric analysis of the interaction between pindolol and different cyclodextrins has been carried out in order to determine the apparent stability constants of the complexes and the thermodynamic parameters associated to complexation.     

Vibrational study of the metal-adsorbate interaction of phenylacetic acid and alpha-phenylglycine on silver surfaces

Raman and SERS spectra of phenylacetic acid and alpha-phenylglycine on silver sols have been recorded at several concentrations and pH values. The alpha-phenylglycine has been also studied in D(2)O. The respective vibrational assignments have been proposed and the analysis of the SERS spectra has made it possible to conclude that phenylacetic acid links to the metal through its carboxylate group only, while alpha-phenylglycine links also through its amino group. In both cases the aromatic ring seems to be almost perpendicular to the metal surface. On the other hand, the contribution of the charge transfer (CT) mechanism to the enhancement of the SERS spectra has been calculated as well and it is found to be very important in both molecules. The band most enhanced by this mechanism is that of vibration 8a, mainly in alpha-phenylglycine.     

Fluorimetric determination of aflatoxins by flow-injection analysis

Summary A fast and inexpensive fluorimetric method for the determination of total aflatoxins (B₁, B₂, G₁, and G₂) in food of use in screening numerous samples suspectedly containing these substances is proposed. The sensitivity of the method (determination range between 0.5 and 200.0 ng ml^–1) allows these analytes to be detected at concentrations well below legal limits; hence, separation-detection techniques such as HPLC need only be used with samples in which these compounds are found to occur. The method has been applied to maize, peanut and tapioca samples, obtaining average recoveries of 100.9 with deviations of ±5% with respect to 100% recovery.

---

Fluorometrische Bestimmung von Aflatoxinen durch Fließinjektionsanalyse

     

Relaxation response of polymers containing highly flexible side groups monitored by broadband dielectric spectroscopy

The relaxation behavior of poly(5-acryloxymethyl-5-methyl-1,3-dioxacyclohexane), a polymer containing highly flexible side groups, is studied by broadband dielectric spectroscopy in the frequency and temperature ranges 10(-1)-10(9) Hz and 123-473 K, respectively. Above the glass transition temperature T(g) the dielectric loss in the frequency domain exhibits a prominent alpha absorption, followed in increasing order of frequencies by two secondary absorptions called beta and gamma. At temperatures slightly higher than T(g), the a relaxation is well separated from the beta, but as temperature increases overlapping between both relaxations augments forming an alphabeta absorption in the vicinity of 420 K. This latter absorption displays a shoulder on its high-frequency side corresponding to the y relaxation. The strength of the a relaxation decreases with increasing temperature, eventually vanishing at the temperature at which the alphabeta absorption is formed. The time retardation spectra of the isotherms are calculated and further used to facilitate the deconvolution of the overlapping relaxations. The fact that the temperature dependence of the beta relaxation also describes that of the alphabeta absorption suggests that both relaxations have the same nature. It seems that as temperature increases, the a relaxation feeds on the beta absorption until its complete disappearance. The gamma relaxation, in turn, seems to increase at the expense of the alphabeta process at high temperature.     

Electrochemical Synthesis and Characterization of Nickel(II) Complexes with N‐2‐Pyridyl‐sulfonamide Ligands

Heteroleptic nickel(II) complexes [NiL₂L′] of a series of monoanionic and potentially bidentate N‐2‐pyridyl‐sulfonamide ligands [HL] and 2,2′‐bipyridine or 1,10‐Phenanthroline (L′) have been prepared by electrochemical oxidation of a nickel anode in an acetonitrile solution of the ligands. The complexes have been characterized by microanalysis, IR and electronic spectroscopy, magnetic measurements and LSI mass spectrometry. The crystal structure of [Ni(Ms6mepy)₂(bipy)] has been determined by x‐ray diffraction and shows the metal in an octahedral NiN₆ environment. Octahedral structures are also proposed for the other complexes with the N‐2‐pyridyl‐sulfonamide ligands acting as N,N′ or N, O bidentate systems, depending on the position of the methyl substituent on the pyridine ring.     

NADH Electrooxidation Using Bis(1,10-phenanthroline-5,6-dione) (2,2'-bipyridine)ruthenium(II)-Exchanged Zirconium Phosphate Modified Carbon Paste Electrodes

We present a carbon paste electrode (CPE) modified using the electron mediator bis(1,10‐phenanthroline‐5,6‐dione)(2,2′‐bipyridine)ruthenium(II) ([Ru(phend)₂bpy]²⁺) exchanged into the inorganic layered material zirconium phosphate (ZrP). X‐Ray powder diffraction showed that the interlayer distance of ZrP increases upon [Ru(phend)₂bpy]²⁺ intercalation from 10.3 Å to 14.2 Å. The UV‐vis and IR spectroscopies results showed the characteristic peaks expected for [Ru(phend)₂bpy]²⁺. The UV‐vis spectrophotometric results indicate that the [Ru(phend)₂bpy]²⁺ concentration inside the ZrP layers increased as a function of the loading level. The exchanged [Ru(phend)₂bpy]²⁺ exhibited luminescence even at low concentration. Modified CPEs were constructed and analyzed using cyclic voltammetry. The intercalated mediator remained electroactive within the layers (E°′=–38.5 mV vs. Ag/AgCl, 3.5 M NaCl) and electrocatalysis of NADH oxidation was observed. The kinetics of the modified CPE shows a Michaelis–Menten behavior. This CPE was used for the oxidation of NADH in the presence of Bakers' yeast alcohol dehydrogenase. A calibration plot for ethanol is presented.