Tailoring the morphology and properties of waterborne polyurethanes by the procedure of cellulose nanocrystal incorporation

Polyurethane waterborne synthesis was performed using a two-step method, commonly referred to as a prepolymer method. Nanocomposites based on waterborne polyurethane and cellulose nanocrystals were prepared by the prepolymer method by altering the mode and step in which the nanofillers were incorporated during the polyurethane formation. The morphology, structural, thermal, and mechanical properties of the resulting nanocomposite films were evaluated by Fourier transform infrared spectroscopy (FTIR), small angle X-ray scattering (SAXS), scanning electron microscopy (SEM), and tensile tests. FTIR results indicated that the degree of interaction between the nanofillers and the WPU through hydrogen bonds could be controlled by the method of cellulose nanocrystal incorporation. Data obtained from SAXS experiments showed that the cellulose nanocrystals as well as the step of the reaction in which they are added influenced the morphology of the polyurethane. The reinforcing effect of CNCs on the nanocomposites depends on their morphology.     

Self‐Assembled Tetragonal Prismatic Molecular Cage Highly Selective for Anionic π Guests

The metal‐directed supramolecular synthetic approach has paved the way for the development of functional nanosized molecules. In this work, we report the preparation of the new nanocapsule 3? (CF₃SO₃)₈ with a A₄B₂ tetragonal prismatic geometry, where A corresponds to the dipalladium hexaazamacrocyclic complex Pd‐1 , and B corresponds to the tetraanionic form of palladium 5,10,15,20‐tetrakis(4‐carboxyphenyl)porphyrin ( 2 ). The large void space of the inner cavity and the supramolecular affinity for guest molecules towards porphyrin‐based hosts converts this nanoscale molecular 3D structure into a good candidate for host–guest chemistry. The interaction between this nanocage and different guest molecules has been studied by means of NMR, UV/Vis, ESI‐MS, and DOSY experiments, from which highly selective molecular recognition has been found for anionic, planar‐shaped π guests with association constants (K_a) higher than 10⁹ M ^?1, in front of non‐interacting aromatic neutral or cationic substrates. DFT theoretical calculations provided insights to further understand this strong interaction. Nanocage 3? (CF₃SO₃)₈ can not only strongly host one single molecule of M(dithiolene)₂ complexes (M=Au, Pt, Pd, and Ni), but also can finely tune their optical and redox properties. The very simple synthesis of both the supramolecular cage and the building blocks represents a step forward for the development of polyfunctional supramolecular nanovessels, which offer multiple applications as sensors or nanoreactors.     

A prototype calix[4]arene-based receptor for carbohydrate recognition containing peptide and phosphate binding groups

A novel class of macrobicyclic receptors for carbohydrate recognition based on upper rim, peptide-bridged calix[4]arenes has been designed and synthesized. Receptor 12, in which a charged phosphate group cooperates with peptide hydrogen-bonding donor and acceptor groups in the binding process, is the most efficient and selective in the complexation of simple carbohydrate derivatives. The selectivity observed is toward beta-glucoside 13a, which is better bound (DeltaG degrees = 19.6 kJ mol(-)(1)) compared to the corresponding alpha anomer 13b (DeltaG degrees = 17.0 kJ mol(-)(1)) and to the beta-galactoside 13c (DeltaG degrees = 17.7 kJ mol(-)(1)) in CDCl(3). A substantial drop in the stability constant is observed by esterification of the phosphate group in the host 12 or by alkylation of the OH groups in the 2 and 3 positions in the beta-glucoside and beta-galactoside derivatives. On the basis of a careful analysis of the (1)H NMR data available, a binding mode of the beta-octylglucoside 13a to receptor 12 is proposed.     

Planar Chromatographic and Electrophoretic Study of Thermally Induced Conformational Modifications of Protein Structure

JPC – Journal of Planar Chromatography – Modern TLC -     

Effect of the Media on the Quantum Yield of Singlet Oxygen (O2(1Δg)) Production by 9H‐Fluoren‐9‐one: Solvents and Solvent Mixtures

We have investigated the effect of a series of 18 solvents and mixtures of solvents on the production of singlet molecular oxygen (O₂(¹Δ_g), denoted as ¹O₂) by 9H‐fluoren‐9‐one (FLU). The normalized empirical parameter E derived from E_T(30) has been chosen as a measure of solvent polarity using Reichardt's betaine dyes. Quantum yields of ¹O₂ production (Φ_Δ) decrease with increasing solvent polarity and protic character as a consequence of the decrease of the quantum yield of intersystem crossing (Φ_ISC). Values of Φ_Δ of unity have been found in alkanes. In nonprotic solvents of increasing polarity, Φ_ISC and, therefore, Φ_Δ decrease due to solvent‐induced changes in the energy levels of singlet and triplet excited states of FLU. This compound is a poor ¹O₂ sensitizer in protic solvents, because hydrogen bonding considerably increases the rate of internal conversion from the singlet excited state, thus diminishing Φ_Δ to values much lower than those in nonprotic solvents of similar polarity. In mixtures of cyclohexane and alcohols, preferential solvation of FLU by the protic solvent leads to a fast decrease of Φ_Δ upon addition of increasing amounts of the latter.     

Determination of the insecticide fenoxycarb in apple leaf samples by an enzyme-linked immunosorbent assay

An enzyme-linked immunosorbent assay (ELISA) was used for the determination of fenoxycarb in apple leaf samples. Single step extraction procedures with phosphate-citrate buffered solution containing different amounts of methanol were tested showing that a solvent percentage of 20% (v/v) was the best condition, with recoveries between 85 and 100% in the working range of 25-500 μg kg⁻¹ and a negligible matrix effect. The low detection limit reached, 1 μg kg⁻¹ against 50 μg kg⁻¹ for the recommended liquid chromatographic method, makes the ELISA more suitable for determinations of the fenoxycarb residues in apple leaf samples. The reliability of the ELISA was evaluated by assaying the insecticide in spiked and contaminated samples by three different approaches: direct determination, standard addition method with a calibration graph, and the dilution test. The corresponding coefficients of variation were, respectively, 11, 22 and 27%. The direct determination on the (1+1) diluted apple leaf extract was used to measure the insecticide residues in samples collected in the north-eastern Italian regions of Veneto and Trentino-Alto Adige.     

Model-based sensitivity analysis of a fluidised-bed bioreactor for mercury uptake by immobilised Pseudomonas putida cells

A model-based sensitivity analysis was performed in order to evaluate the importance of the individual operating parameters of a three-phase fluidised-bed biological reactor used for removing mercury ions from wastewater. The parameters analysed involve the immobilised biomass load (bacteria P. putida) on alginate beads, particle size, inlet flow-rate, mercury ion loads in the fed wastewater, and the solid fraction in the reactor. Predictions were generated by using pseudo-first-order, Michaelis-Menten, or pseudo-Haldane kinetic models. The results highlight the major influence of the biomass/solid load and of the liquid residence time on the reactor efficiency. Also, the resultant significant differences in the model predictions underline the importance of using a more accurate kinetic model for process design and control purposes.     

Investigation of thermal stability, spectral, magnetic, and antimicrobial behavior for new complexes of Ni(II), Cu(II), and Zn(II) with a bismacrocyclic ligand

Novel complexes of type M₂LCl₄·nH₂O (M: Ni, n = 4; M: Cu, n = 2.5 and M: Zn, n = 1.5; L: ligand resulted from 1,3-phenylenediamine, 3,6-diazaoctane-1,8-diamine, and formaldehyde one-pot condensation) were synthesized and characterized. The ligand was also isolated and characterized. The complexes features have been assigned from microanalytical, electrospray ionization tandem mass spectrometry, IR, UV–vis, ¹H NMR, and EPR spectra as well as magnetic data at room temperature. Simultaneous thermogravimetric/dynamic scanning calorimetry/evolved gas analysis measurements were performed to evidence the nature of the gaseous products formed in each step. Processes as water elimination, fragmentation, and oxidative degradation of the organic ligand as well as chloride elimination were observed during the thermal decomposition. The final product of decomposition was metal(II) oxide except for copper complex where CuCl remained also in the oxide network. The complexes exhibited an improved antibacterial activity in comparison with the ligand concerning both planktonic as well as biofilm-embedded cells.     

Thermal investigation of heavy crude oil by simultaneous TG–DSC–FTIR and EDXRF

Present study investigates thermal behavior of two heavy crude oils with different °API values by simultaneous thermogravimetry–differential scanning calorimetry–fourier transform infrared spectroscopy (TG–DSC–FTIR), and an evaluation of the chemical element levels present in the oils’ ashes was done by energy dispersive X-ray fluorescence spectrometry. TG and DSC curves were obtained for two samples in nitrogen atmosphere. Among all inorganic components evaluated, the highest concentration in the two oils was SO₃. Thus this study may contribute to a better understanding of the thermal behavior of heavy crude oils and their composition.