Study on the stability of noradrenaline and on the determination of its acidity constants

Noradrenaline is a catecholamine which has been largely recognised to play a very important role in biological systems. In view of the neurotransmitter's alleged importance, this work aimed at showing the influence of time on its spectral behaviour using different analytical methods and determining its acidity constants through spectrophotometric titration and by the so-called point-by-point analysis, where the samples are freshly prepared for each pH value investigated at the instant required. Because the catecholamines are light-sensitive and likely to react with the oxygen in the surrounding air, both methods used preclude its incidence onto the samples being analysed under the presence of a nitrogen atmosphere maintained over the solutions. The constants obtained through point-by-point analysis were log beta1 = 30.71+/-0.16, log beta2 = 22.00+/-0.15 and log beta3 = 11.69+/-0.16.     

Determination of six metals in galician red wines (in northwestern Spain) by capillary electrophoresis

A simple technique is described for the routine simultaneous capillary electrophoretic determination of 6 cations in wine. Separation was achieved on a fused silica capillary column with a UV-Cat-1, alpha-hydroxysobutyric acid and 18-crown-6-ether buffer at pH 4.5 and indirect UV detection at 214 nm. The content of magnesium, sodium, potassium, calcium, manganese, and lithium was determined. The method is quantitative, with recoveries in the 92-102% range, and linear over more than one order of magnitude. The precision is better than 2.5-3.4%. The method is sensible, with detection limits between 0.01 and 0.06 mg/L. Twenty-five red wines with a Certified Brand of Origin from Galicia (north-western Spain) were analyzed by the proposed method. Various wines showed very similar electrophoretic profiles, but significant quantitative differences were observed.     

Sensitive stripping voltammetry of heavy metals by using a composite sensor based on a built-in bismuth precursor

A new graphite-epoxy composite electrode (GECE) containing Bi(NO(3))(3) as a built-in bismuth precursor for simultaneous and individual anodic stripping analysis of heavy trace metals like lead and cadmium is reported. The developed Bi(NO(3))(3)-GECE is compatible with bismuth film electrodes reported previously including the composite electrodes (Bi-GECE) recently reported by our group. Bi(NO(3))(3)-GECE displays the ability for the detection of both individual and simultaneous determination of heavy trace metals and exhibits well defined, reproducible and sharp stripping signals. The sensitive response is combined with the minimal toxicity of Bi(NO(3))(3). This novel sensor would be an appropriate alternative tool to sensors using bismuth in solution during their utilization in environmental quality monitoring as well as other applications.     

Substituted m-phenylene bridges as strong ferromagnetic couplers for Cu(II)-bridge-Cu(II) magnetic interactions: new perspectives

Based on a combined theoretical-experimental study, we propose that substituted m-phenylene ligands (m-N-Phi-N) can act as tuneable strong ferromagnetic couplers connecting Cu(II) ions; a new complex presenting that bridge with J close to +15 cm(-1) has been suggested and synthesized.     

Pretreatment of sugarcane bagasse hemicellulose hydrolysate for xylitol production byCandida guilliermondii

Applied Biochemistry and Biotechnology - In order to remove or reduce the concentrations of toxic substances present in the sugarcane bagasse hemicellulose hydrolysate for xyloseto-xylitol...     

The use of emulsions for the determination of methylmercury and inorganic mercury in fish-eggs oil by cold vapor generation in a flow injection system with atomic absorption spectrometric detection

An on-line time based injection system used in conjunction with cold vapor generation atomic absorption spectrometry and microwave-aided oxidation with potassium persulfate has been developed for the determination of the different mercury species in fish-eggs oil samples. A three-phase surfactant-oil-water emulsion produced an advantageous flow when a peristaltic pump was used to introduce the highly viscous sample into the system. The optimum proportion of the oil-water mixture ratio was 2:3 v/v with a Tween 20 surfactant concentration in the emulsion of 0.008% v/v. Inorganic mercury was determined after reduction with sodium borohydride while total mercury was determined after an oxidation step with persulfate prior to the reduction step to elemental mercury with the same reducing agent. The difference between total and inorganic mercury determined the organomercury content in samples. A linear calibration graph was obtained in the range 0.1-20 micrograms l-1 of Hg2+ by injecting 0.7 ml of samples. The detection limits based on 3 sigma of the blank signals were 0.11 and 0.12 microgram l-1 for total and inorganic mercury, respectively. The relative standard deviation of ten independent measurements were 2.8 and 2.2% for 10 micrograms l-1 and 8.8 and 9.0% for 0.1 microgram l-1 amounts of total and inorganic mercury, respectively. The recoveries of 0.3, 0.6 and 8 micrograms l-1 of inorganic and organic mercury added to fish-eggs oil samples ranged from 93.0 to 94.8% and from 100 to 106%, respectively. Good agreement with those values obtained for total mercury content in real samples by electrothermal atomic absorption spectrometry was also obtained, differences between mean values were < 7%. With the proposed procedure, 22 proteropterous catfish-eggs oil samples from the northwestern coast of Venezuela were measured; while the organic mercury lay in the range 2.0 and 3.3 micrograms l-1, inorganic mercury was not detected.     

Influence of rotation and isotope effects on the dynamics of the N((2)D)+H(2) reactive system and of its deuterated variants

Integral cross sections and thermal rate constants have been calculated for the N((2)D)+H(2) reaction and its isotopic variants N((2)D)+D(2) and the two-channel N((2)D)+HD by means of quasiclassical trajectory and statistical quantum-mechanical model methods on the latest ab initio potential-energy surface [T.-S. Ho et al., J. Chem. Phys. 119, 3063 (2003)]. The effect of rotational excitation of the diatom on the dynamics of these reactions has been investigated and interesting discrepancies between the classical and statistical model calculations have been found. Whereas a net effect of reagent rotation on reactivity is always observed in the classical calculations, only a very slight effect is observed in the case of the asymmetric N((2)D)+HD reaction for the statistical quantum-mechanical method. The thermal rate constants calculated on this Potential-Energy Surface using quasiclassical trajectory and statistical model methods are in good agreement with the experimental determinations, although the latter are somewhat larger. A reevaluation of the collinear barrier of the potential surface used in the present study seems timely. Further theoretical and experimental studies are needed for a full understanding of the dynamics of the title reaction.     

X-ray structure and variable temperature NMR spectra of [meso-triarylcorrolato]copper(III)

The diamagnetic square planar d(8) complexes [meso-arylcorrolato]copper(III) become paramagnetic upon warming, indicative of the equilibrium between the [corrolato]copper(III) and the [corrolato](+)* copper(II) forms of the complex. [meso-Triphenylcorrolato]copper(III) was structurally characterized and found to be saddled.     

Do solid surface potential barriers retard convoy peak electrons?

Using a coaxial cylindric electron spectrometer and an electrostatic ion energy analyzer in tandem, a direct measurement of the difference of the energy of convoy peak electron and the electron equivalent ion energy of protons emerging from the downstream surface of C, Au and Al foils is performed in the proton energy range from 60 to 250 keV. This measurement is made possible using the accepted evidence that for a gas target these energies are equal. It is found that also for the beam foil convoy peak electrons, within an experimental average uncertainty of about ±0.1 eV, there is no difference between these energies. If one accepts that the origin of convoy electrons is from inside the solid, the conclusion is that no retardation by the solid surface potential barrier, which is of the order of a few eV, is observed. This is attributed to the strong electron-ion Coulomb interaction which almost completely overshadows the force exerted on the electron by the field of the surface barrier.