Simultaneous spectrophotometric determination of Zinc(II) and Nickel(II) with 1-(2-pyridylazo)-2-naphthol

A new procedure for the simultaneous spectrophotometric determination of Zn(II) and Ni(II) with 1-(2-pyridylazo)-2-naphthol as chromogenic reagent has been developed. It is based on resolution of the mixed spectrum over the wavelength range 530–590 nm by applying a least-squares fitting program to standard spectra from each component. The spectra are recorded at an apparent pH of 5.0, provided by an acetate buffer in a mixed 6040 v/v 2-ethoxyethanol/water medium. The relative standard deviations for determination of 13.7 g of Ni and 31.0 g of Zn were 1.9 and 1.0%, respectively (8 replications). The method has been applied to the analysis of iron surfaces coated with a Zn-Ni alloy. The results are compared with those obtained by atomic-absorption spectrophotometry.     

Accurate intermolecular ground state potential of the Ar-N2 van der Waals complex

After carrying out a systematic basis set convergence study, we evaluate several ground state potential energy surfaces of the Ar-N(2) van der Waals complex at the coupled cluster singles and doubles model including connected triples corrections. We use the aug-cc-pVXZ (X=5,Q,D) and the daug-cc-pVQZ basis sets augmented with a set of 3s3p2d1f1g (denoted 33211) and 3s3p2d2f1g (denoted 33221) midbond functions, respectively. aug-cc-pVTZ-33211 results were available in the literature. The aug-cc-pV5Z-33211 (daug-cc-pVQZ-33221) surface is characterized by a T-shaped minimum at R(e)=3.709 (3.701) A and of 99.01 (102.50) cm(-1), and a linear saddle point at 4.260 (4.257) A and D(e)=75.28 (79.73) cm(-1). These results are compared with the values provided by the semiempirical potentials available, and those of previous theoretical studies. The basis set convergence of the intermolecular potentials is also analyzed. From the potentials the rovibronic spectroscopic properties are determined. We study the basis set convergence of the rotational frequencies. The binding parameters that characterized the aug-cc-pVTZ-33211 surface are reasonable, but the surface is not good enough to evaluate the microwave spectra. The aug-cc-pVQZ-33211 basis set results considerably improve the triple zeta and are close to the aug-cc-pV5Z-33211. Considering the small differences between the quadruple and the quintuple zeta surfaces, the latter results can be expected to be close to convergence. At this level the differences with respect to the accurate experimental frequencies are in the order of 0.7%. In the case of the daug-cc-pVXZ-33211,33221 (X=5,Q,T,D) series, the convergence of the interaction energies with respect to basis set improvement is not so smooth. The errors in the frequencies obtained with the daug-cc-pVQZ-33221 basis set with respect to experiment are in the order of 0.4%.     

Use of diode-array detectors for the simultaneous spectrophotometric determination of calcium and magnesium by flow injection

A method for the simultaneous flow injection spectrophotometric determination of calcium and magnesium with Arsenazo III based on the use of diode-array detector and merging zones is described. The method is applicable to the resolution of mixtures in which the chromogenic reagent has a high absorbance and its spectrum strongly overlaps those of its complexes. In resolving the mixtures, the excess reagent is considered as another component. Quantitation is based on the normal absorbance and first-derivative absorbance spectra. The method is applied to 0.2–1.5 μg ml^?1 Ca and 0.1–1.0 μg ml^?1 Mg. The analysis rate is 50 h^?1.     

Simultaneous determination of two components by spectrofluorimetric techniques

A procedure is described for the resolution of two-component mixtures by use of data from variable-angle fluorescence spectrometry. The experimental data are treated by multilinear regression. The method is applied to the resolution of mixtures of fluorescein and dichlorofluorescein at the ng ml^?1 level; mean errors are < 4%.     

Development and validation of a near infrared method for the analytical control of a pharmaceutical preparation in three steps of the manufacturing process

A near infrared diffuse reflectance spectroscopy (NIRS) procedure for the quantitative control analysis of the active compound (otilonium bromide) in a pharmaceutical preparation in three steps of the production process (blended product, cores and coated tablets) and a methodology for its validation are proposed. The analytical procedure is composed by two consecutive steps. First, the sample is identified by comparing its spectrum with a second derivative spectral library. If the sample is positively identified, the active compound is quantified by using a previously established partial least squares (PLS) calibration model. The procedure was validated by studying repeatability, intermediate precision, accuracy and linearity. To this end, an adaptation of ICH (International Conference on Harmonisation) validation methodology to an NIR multivariate calibration procedure is proposed. The relative standard error of prediction (RSEP) was < or = 1% and the suitability of the procedure for control analysis was confirmed by the results obtained analysing new production samples produced over a three-month period.     

Trehalose-based cyclodextrin analogs: cyclotrehalans (CTs)

A new concept for the de novo synthesis of artificial glyconanocavities is presented. The use of alternating α,α′-trehalose building blocks and (thio)urea segments allows the efficient synthesis of a new family of cyclooligosaccharides, namely cyclotrehalans (CTs), featuring a convex-shaped cavity with an apolar environment. CTs are designed to exhibit molecular inclusion abilities similar to that of cyclodextrins (CDs). Contrary to CDs, CTs expose the monosaccharide β-face to the inner cavity, while the (thio)urea tethers provides some conformational adaptability. High-yielding syntheses of a series of CTs and a preliminary evaluation of their inclusion properties are reported.     

Polymer-Titanium hybrids obtained by radical polymerization and Sol-Gel process

The possibility to prepare hybrids made by poly(vinyl acetate) (PVAc), poly(methyl methacrylate) (PMMA) and/or poly(ethyl acrylate) (PEtA) with TiO₂ was studied. The processes of polymer formation-radical polymerization and sol-gel process for inorganic network —were achieved simultaneously. Due to a high reactivity of titanium isopropoxide (TIP) in the sol-gel process, a complexant comonomer, allyl acetoacetate (AlAcAc), was used. Covalent bonds between polymer and inorganic chains were obtained by addition of trialkoxysilane derivates with vinyl (VTES) or methacryloyl (MPTS) groups. The presence of TIP inhibits the radical polymerization of vinyl acetate (VAc). The PVAc-TiO₂ hybrids were produced by the sol-gel process of TIP in the presence of pre-obtained PVAc. Except for VTES and MPTS, trialkoxysilane derivates with methyl (MeTES), octyl (OTES) and phenyl (PTES) groups were used. The thermal stability of hybrids is strongly affected by TiO₂ presence and by the type of trialkoxysilane derivates. The thermal stability of PVAc hybrids decreases in the presence of TiO₂ inorganic network. The glass transition temperature of polymers increases in the presence of the inorganic network.     

Determination of physical properties of bitumens by use of near-infrared spectroscopy with neural networks. Joint modelling of linear and non-linear parameters

The fact that bitumens behave as non-Newtonian fluids results in non-linear relationships between their near-infrared (NIR) spectra and the physico-chemical properties that define their consistency (viz. penetration and viscosity). Determining such properties using linear calibration techniques [e.g. partial least-squares regression (PLSR)] entails the previous transformation of the original variables by use of non-linear functions and employing the transformed variables to construct the models. Other properties of bitumens such as density and composition exhibit linear relationships with their NIR spectra. Artificial neural networks (ANNs) enable modelling of systems with a non-linear property-spectrum relationship; also, they allow one to determine several properties of a sample with a single model, so they are effective alternatives to linear calibration methods. In this work, the ability of ANNs simultaneously to determine both linear and non-linear parameters for bitumens without the need previously to transform the original variables was assessed. Based on the results, ANNs allow the simultaneous determination of several linear and non-linear physical properties typical of bitumens.     

Mimicking photosynthesis in a computationally designed synthetic metalloprotein

While advances in protein design have made possible the construction of protein architectures with nativelike properties and predictable structures and function, there are as of yet no examples of functional, protein-based, solar energy conversion systems. This communication describes the design and characterization of an artificial reaction center (RC) protein that closely resembles the function of the natural photosynthetic RC. The synthetic protein, designed by the protein design program CORE, participates in multiple reduction/oxidation cycles with exogenous acceptors/donors following photoexcitation. The designed metalloprotein, aRC, consists of a tetrahelical bundle functionalized with two bis-histidine bound metal cofactors: a Ru(bpy)2 moiety and a heme group. Two distinct bis-histidine binding sites were engineered for each of these metal centers. Photoexcitation of aRC results in rapid ET from the RuII complex to the heme group (kET >/= 5 x 1010 s-1) yielding a long-lived (70 ns) charge-separated state (CSS), RuIII/FeII. This long-lived CSS participates in subsequent ET reactions with exogenous donors and acceptors in multiple photocycles, thus mimicking the basic function of native photosynthetic RCs. This study illustrates the successful design and construction of a protein-based functional charge separation device using a combination of automated computational protein design and knowledge of the engineering principles of biological electron tunneling extracted from natural electron-transfer systems. To our knowledge, this represents the first example of a functional protein-based artificial reaction center.     

Simple and rapid micellar electrokinetic capillary chromatographic method for simultaneous determination of four antiepileptics in human serum

A very rapid and simple MEKC method was developed for the simultaneous determination of four antiepileptic drugs, ethosuximide (Etho), primidone (Pri), phenytoin (Pht) and carbamazepine (Cbz) in human serum. Sample analysis required only 100 microL of human serum which only needed to be centrifuged, decanted and combined with the running buffer [5.3 mM Na(2)HPO(4)/3.2 mM borax buffer (pH 9.5) containing 55 mM SDS and 3.5% (v/v) acetone]. The analysis was performed in only 10 min into fused-silica capillaries (57 cm total length with 50 microm i.d. and 50 cm to the detector) using the MEKC methodology with diode-array detection at 220 nm. The calibration graphs were established for ethoximide, primidone, phenytoin and carbamazepine between 0 and 20 mg/L. Recoveries were between 85 and 87%. The simplicity of the proposed methodology makes it suitable for routine clinical use, especially for epileptic patients on polytherapy.