Photochemical properties of selected flavonol dyes: Effects on their separation using capillary electrophoresis

Flavonols are naturally occurring dyes that can be extracted from plants. Because of their antioxidant properties, they are thought to have health benefits. In this study, the photochemical degradation properties of selected flavonols were investigated. Dilute solutions of dyes were exposed to light from a broadband visible light source, and the rate of photodegradation was determined by measuring the decrease in fluorescence of the dyes with respect to time. At pH 9.24, the first-order rate constants for 10?µg?mL^?1 solutions of myricetin, quercetin, kaempferol, and morin were 0.468, 0.162, 0.108, and 0.126?s^?1, respectively. Interestingly, the stability of these historical dyes was also found to be greatly affected by pH. Awareness of the photochemical properties and stability of flavonol dyes is very important for capillary electrophoresis (CE) separations. Photodegradation of the flavonol dyes under the alkaline conditions (pH 9.2) used in CE can have a profound effect on the reproducibility of repeated separations. Even a modest decrease in pH (pH 8.5) greatly improved the stability of these dyes and enabled the successful separation of these flavonol dyes with minimal degradation over time.     

Synthesis of 2- and 2,7-functionalized pyrene derivatives: an application of selective C-H borylation

An efficient synthetic route to 2- and 2,7-substituted pyrenes is described. The regiospecific direct C-H borylation of pyrene with an iridium-based catalyst, prepared in situ by the reaction of [{Ir(μ-OMe)cod}(2)] (cod = 1,5-cyclooctadiene) with 4,4'-di-tert-butyl-2,2'-bipyridine, gives 2,7-bis(Bpin)pyrene (1) and 2-(Bpin)pyrene (2, pin = OCMe(2)CMe(2)O). From 1, by simple derivatization strategies, we synthesized 2,7-bis(R)-pyrenes with R = BF(3)K (3), Br (4), OH (5), B(OH)(2) (6), and OTf (7). Using these nominally nucleophilic and electrophilic derivatives as coupling partners in Suzuki-Miyaura, Sonogashira, and Buchwald-Hartwig cross-coupling reactions, we obtained 2,7-bis(R)-pyrenes with R = (4-CO(2)C(8)H(17))C(6)H(4) (8), Ph (9), C≡CPh (10), C≡C[{4-B(Mes)(2)}C(6)H(4)] (11), C≡CTMS (12), C≡C[(4-NMe(2))C(6)H(4)] (14), C≡CH (15), N(Ph)[(4-OMe)C(6)H(4)] (16), and R = OTf, R' = C≡CTMS (13). Lithiation of 4, followed by reaction with CO(2), yielded pyrene-2,7-dicarboxylic acid (17), whilst borylation of 2-tBu-pyrene gave 2-tBu-7-Bpin-pyrene (18) selectively. By similar routes (including Negishi cross-coupling reactions), monosubstituted 2-R-pyrenes with R = BF(3)K (19), Br (20), OH (21), B(OH)(2) (22), [4-B(Mes)(2)]C(6)H(4) (23), B(Mes)(2) (24), OTf (25), C≡CPh (26), C≡CTMS (27), (4-CO(2)Me)C(6)H(4) (28), C≡CH (29), C(3)H(6)CO(2)Me (30), OC(3)H(6)CO(2)Me (31), C(3)H(6)CO(2)H (32), OC(3)H(6)CO(2)H (33), and O(CH(2))(12)Br (34) were obtained from 2. These derivatives are of synthetic and photophysical interest because they contain donor, acceptor, and conjugated substituents. The crystal structures of compounds 4, 5, 7, 12, 18, 19, 21, 23, 26, and 28-31 have also been obtained from single-crystal X-ray diffraction data, revealing a diversity of packing modes, which are described in the Supporting Information. A detailed discussion of the structures of 1 and 2, their polymorphs, solvates, and co-crystals is reported separately.     

Use of F-BODIPYs as a protection strategy for dipyrrins: optimization of BF(2) removal

We recently reported the first general method for the deprotection of 4,4-difluoro-4-bora-3a,4a-diaza-s-indacenes (F-BODIPYs) involving a microwave-assisted procedure for the removal of the BF(2) moiety, and liberation of the corresponding free-base dipyrrin. Further optimization of the reaction has resulted in a more convenient and accessible protocol. The availability of this new methodology enables BF(2)-complexation to be used as a dipyrrin protection strategy. Herein lies a detailed examination of the deprotection reaction, with a view to optimization and gaining mechanistic insight, and its application in facilitating a multistep synthesis of pyrrolyldipyrrins.     

The optical activity of carvone: a theoretical and experimental investigation

The optical rotatory dispersion (ORD) and circular dichroism of the conformationally flexible carvone molecule has been investigated in 17 solvents and compared with results from calculations for the "free" (gas phase) molecule. The G3 method was used to determine the relative energies of the six conformers. The optical rotation of (R)-(-)-carvone at 589 nm was calculated using coupled cluster and density functional methods, including temperature-dependent vibrational corrections. Vibrational corrections are significant and are primarily associated with normal modes involving the stereogenic carbon atom and the carbonyl group, whose n → π? excitation plays a significant role in the chiroptical response of carvone. Without the inclusion of vibrational corrections the optical rotation calculated with CCSD and DFT has the opposite sign of experimental data. Calculations of optical rotation performed in solution using the polarizable continuum model were also opposite in sign when compared to that of the experiment.     

Deformation properties of the neutron-deficient odd-A Pt and Hg nuclei

Nuclear and atomic spectroscopy measurements have provided a great number of data on the neutron-deficient Pt and Hg nuclei. The odd-A Pt and Hg with A<186 have a prolate shape, and the even-even isotopes have a triaxial shape, while the nuclear shape of the odd-A Pt and Hg with A>186 is still an open question. The energy of the low-lying levels and the nuclear moments have been calculated in the framework of a semimicroscopic “axial-rotor + 1 quasiparticle” coupling model. The predictions are compared with the experimental data and discussed. The results strongly suggest a prolate shape for the negative-parity low-lying states of the odd-A ^187–191Pt and ^187–193Hg isotopes.     

A model to set measurement quality objectives and to establish measurement uncertainty expectations in analytical chemistry laboratories using ASTM proficiency test data

A model is presented that correlates historical proficiency test data as the log of interlaboratory standard deviations versus the log of analyte concentrations, independent of analyte (measurand) or matrix. Analytical chemistry laboratories can use this model to set their internal measurement quality objectives and to apply the uncertainty budget process to assign the maximum allowable variation in each major step in their bias-free measurement systems. Laboratories that are compliant with this model are able to pass future proficiency tests and demonstrate competence to laboratory clients and ISO 17025 accreditation bodies. Electronic supplementary material to this paper can be obtained by using the Springer LINK server located at http://dx.doi.org/ 10.1007/s007690100398-y. Received: 31 March 2001 Accepted: 11 September 2001     

Overcoming the boundary effects in surface spline interpolation

Surface spline interpolation when the domain is all of R^d isknown to converge much faster to the data function f than inthe case when the domain is the unit ball. This difference isunderstood to be due to boundary effects which, as will be shown,also affect the size of the surface spline's coefficients. Wepropose a modified form of surface spline interpolation which,to a great extent, overcomes these boundary effects. This modifiedsurface spline interpolant uses only the values of f at thegiven interpolation points.     

Preparation of sinapinaldehyde modified mesoporous silica materials and their application in selective extraction of trace Pb(II)

A new solid phase extractant, sinapinaldehyde (SA) modified SBA-15 mesoporous silica, was developed for selective extraction and preconcentration of trace Pb(II) from aqueous solutions. The successful immobilization of SA on SBA-15 and the strong interaction between SA-SBA-15 and Pb(II) were characterized and confirmed by FTIR spectroscopy and scanning electron microscopy. Parameters such as solution pH, shaking time, eluent condition and sample volume were optimized so that the maximum removal of Pb(II) from solution could be achieved. At pH 4.0, the maximum adsorption capacity of the sorbent for Pb(II) was found to be 33.6?mg?g^?1 and the adsorbed Pb(II) could be completely eluted using a mixed solution of 2?M HCl and 5% CS(NH₂)₂. Some common metal ions such as K(I), Na(I), Mg(II), Ca(II), Cr(III), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Hg(II) did not interfere with the adsorption of trace Pb(II). The detection limit of the present method was found to be 1.3?ng?mL^?1 and the relative standard deviation was less than 2.0% (n?=?8). These results suggested that this new sorbent is very efficient and selective for the removal of trace Pb(II) in water samples.     

Comparison of the growth and degradation of poly(glycolic acid) and poly(ε‐caprolactone) brushes

The growth and degradation of poly(glycolic acid) (PGA) and poly(ε‐caprolactone) (PCL) brushes were compared. Using tin (octanoate) as the catalyst, optimal conditions were found for growth of each polyester brush from the hydroxy‐terminated silicon surface via ring‐opening polymerization. PCL brushes grew thicker at elevated temperatures but the thickest PGA brushes grew at room temperature. Unlike bulk polyesters that can degrade under both acidic and basic conditions, the confined surface polyester brushes only degraded under neutral or basic conditions. The degradation mechanism of grafted polyester brushes was probed through a blocking test. It was shown that the terminal hydroxy groups of these polyester brushes were essential to the degradation process indicating a preferential backbiting mechanism. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4643–4649