Conversion of Allylic Alcohols into Allylic Nitromethyl Compounds via a Palladium-Catalyzed Solvolysis: An Enantioselective Synthesis of an Advanced Carbocyclic Nucleoside Precursor(1)

A two-step reaction sequence to homoallylic nitro compounds from allylic alcohols is presented. Ethoxy carbonylation of the alcohols with ethyl chloroformate provides the corresponding allylic ethyl carbonates in high yields. Exposure of these substrates to catalytic palladium(0) in CH(3)NO(2) initiates a reaction sequence, ionization-decarboxylation-nitromethylation, that culminates with the formation of nitroalkenes. The regio- and stereochemical outcomes of the nitromethyl allylation reaction can be explained by the behavior of the transient pi-allylpalladium complexes. This methodology serves as a centerpiece for the synthesis of an important carbocyclic nucleoside intermediate.     

Minimization of water vapor interference in the analysis of non-methane volatile organic compounds by solid adsorbent sampling

Water vapor can be a significant interference in the analysis of air for non-methane volatile organic compounds (NMVOCs) using solid-adsorbent sampling techniques. The adsorbent materials used in sampling cartridges have different hydrophobic characteristics, and it is therefore necessary to characterize solid-adsorbent cartridges over a wide range of humidity. Controlled humidity experiments were performed to assess the extent of water vapor interference when samples are collected onto AirToxics solid-adsorbent cartridges. It was found that elevating the temperature of the cartridge to 10 degrees C above the temperature of the air sample greatly reduced water vapor adsorption and interferences and resulted in > or = 90% recovery of NMVOCs, biogenic VOCs and chlorofluorocarbons. Similar collection efficiencies were obtained at ambient temperature by reducing the relative humidity to > or = 60% in the sample by dilution with dry, scrubbed ambient air. A procedure also was developed and optimized for dry-purging cartridges prior to analysis. However, under optimized conditions, significant losses of C3-C5 compounds still occurred under highly humid conditions. It was determined that these losses were due to reduced retention during sampling rather than loss during the dry purge procedure. The dry purge method was shown to be adequate at high humidities for sampling NMVOCs with retention indices greater than 500.     

Rotavap simulation and the estimation of boiling points

A Java applet that predicts solute losses during evaporation from a binary or ternary mixture has been developed which gives good agreement with experiment and can be used to estimate the boiling points of solutes, making use of information which is often collected and then discarded (http://www.ch.cam.ac.uk/magnus/rotavap/).     

Chiroptical properties of 2-substituted pyrrolidines

The CD spectra of L-2-methylpyrrolidine, L-prolinol, and their N-methylated derivatives have been determined. As in the 2-substituted piperidines, N-methylation results in an inversion of the sign of the Cotton effects (CE). However, the sign of the long-wavelength CE does not follow the simple helicity rule found for 2-substituted piperidines, since the pyrrolidine ring is itself chiral and makes its own contributions to the observed CE's. The rotational contribution due to pyrrolidine ring chirality appears to be opposite in sign to and larger in magnitude than that due to the 2-substituent in both the secondary and the tertiary amines.     

Crystal supramolecular motifs: columns of embracing Ph3PMe+ or Ph3PCI+ cations controlling formation of

The crystal structures of (Ph3PCl)2[Cu3Cl8] (1) (triclinic, space group P1, a = 9.480(6) A, b = 10.243(8) A, c = 11.232(6) A, alpha = 86.76(4) degrees, beta = 66.62(5) degrees, gamma = 83.92(4) degrees, Z = 1) and (Ph3PMe)2[Cu3Br8] (2) (triclinic, space group P1, a = 9.795(4) A, b = 10.472(4) A, c = 11.392(4) A, alpha = 86.67(3) degrees, beta = 66.67(3)degrees, gamma = 83.14(3) degrees, Z = 1), reported here, demonstrate a new supramolecular motif for cations of the type Ph3PY+ where Y is CH3 or Cl. The crystals contain columns of cations propagated by alternating 6-fold phenyl embraces (6PE) and pseudo-6PE: the pseudo-6PE described here contains four phenyl rings and two hetero groups (Cl or CH3), and is symbolized as 4P2Y. The zigzag sequence of cations engaged in ...6P...4P2Y...6P...4P2Y... is similar to the zigzag chain of infinite 6-fold phenyl embraces (ZZI6PE) frequently adopted by Ph4P+ cations in crystals. One-dimensionally nonmolecular anion chains with repeat unit [Cu3X8] run parallel to and between the columns of cations. The coordination geometry in the [Cu3X8(2-)]1 to infinity chain has not been observed in crystals with other cations, and it is postulated that the attractive interactions between cations in the pseudo-ZZI6PE crystal supramolecular motif control the geometry of the anions through the requirement for commensurability of cation columns and anion chains.     

Time-resolved C2 swan emission from short-pulse UV fragmentation of CO: evidence for two C2 formation mechanisms

We have studied C₂ Swan (d³Π → a³ Π_u) emission resulting from multiphoton UV excitation of CO. Population of d³Π proceeds through distinct early and late processes, the former giving rise only to normal Swan emission. The late process is responsible for v = 6 enhancement (high-pressure bands), and it dominates time-averaged emission in an bands for ? 10 Torr of CO.     

Preparation and crystal structure ofexo-2,exo-6-dihydroxy-2,6-dimethyl-9-oxabicyclo[3.3.1]nonane

In a further exploration of the structural factors causing alicyclic diols such asexo-2,exo-6-dihydroxy-2,6-dimethylbicyclo[3.3.1]nonane (1) to adopt the helical tubuland inclusion host structure, the title compound (8) has been synthesized and its crystal structure determined. This 9-oxa analogue of (1) has a totally different structure [C₁₀H₁₈O₃; orthorhombic;P2₁2₁2;a 18.989(4),b 19.064(3),c 14.256(3) Å;Z 20; with finalR 0.065] due to involvement of the ether oxygen atom in the hydrogen bonding network. The structure of the diol (8) approximatesP¯42₁ c symmetry, and 16 of the 20 molecules per cell create a hostlike structure of this symmetry, which consists of tightly bound hydrogen bonded pillars parallel toc. The remaining guestlike molecules occupy inequivalent pseudo ¯4 sites separated byc/2 to form weakly bound columns parallel toc. Hydrogen bonds also occur between the pillars and columns. An ordered structure with sensible intermolecular contacts can be formed inP2₁2₁2₁ with thec axis doubled. A difference betweena andb axial lengths correlates with a difference in occupancies of pseudo-¯4-related sites for the guest-like component of the structure.     

Tuning the optical properties of fluorinated indolylfulgimides

Photochromic fluorinated indolylfulgides have been identified as potential candidates for a wide range of applications including optical switches, photoregulators of biological processes, and optical memory media. In humid environments or biological systems, hydrolytic stability is essential. In an effort to improve hydrolytic stability, a series of indolylfulgimides has been synthesized from a parent trifluoromethyl-substituted indolylfulgide. The nitrogen of the succinimide moiety is linked to either a dimethyl amino or one of seven substituted phenyl groups. The phenyl groups feature substituents with increasing electron-withdrawing ability. The spectral characteristics of each compound have been examined, revealing that the wavelength absorption maxima of each form increases with increasing electron-withdrawing ability of the substituted N-phenyl ring. The quantum yields of the photoreactions have been determined with the N-(phenyl)fulgimide showing a ring closure value of nearly 0.30 in toluene. In addition, the hydrolytic, thermal, and photochemical stabilities of each compound have been measured. The fulgimides exhibit at least a 200-fold enhancement of hydrolytic stability for the Z-form and over a 1000-fold enhancement for the C-form in comparison to the same form of the parent fulgide. The N-(2,3,5,6-tetrafluoro-4-trifluoromethylphenyl)fulgimide can undergo up to 3000 photochemical cycles (coloration followed by bleaching) before losing 20% of its initial absorbance at photostationary state.     

Helical tubulate inclusion compounds of ferrocene and squalene

The inclusion compounds of 2,8-dimethyltricyclo[5.3.1.1^3,9]dodecane-syn-2,syn-8-diol,3, with ferrocene and with squalene have been prepared. The crystal structures of these helical tubulate compounds: (3)₃·(ferrocene)_0.75 [P3₁21,a=b=13.7480(6),c=7.0312(5) Å,Z=1,R=0.038] and (3)₃·(squalene)_0.23 [P3₁21,a=b=13.677(1),c=7.0533(9) Å,Z=1,R=0.042] are described. Supplementary Data relating to this article are deposited with the British Library as supplementary publication No. SUP 82151 (16 pages).     

NADH Electrooxidation Using Bis(1,10-phenanthroline-5,6-dione) (2,2'-bipyridine)ruthenium(II)-Exchanged Zirconium Phosphate Modified Carbon Paste Electrodes

We present a carbon paste electrode (CPE) modified using the electron mediator bis(1,10‐phenanthroline‐5,6‐dione)(2,2′‐bipyridine)ruthenium(II) ([Ru(phend)₂bpy]²⁺) exchanged into the inorganic layered material zirconium phosphate (ZrP). X‐Ray powder diffraction showed that the interlayer distance of ZrP increases upon [Ru(phend)₂bpy]²⁺ intercalation from 10.3 Å to 14.2 Å. The UV‐vis and IR spectroscopies results showed the characteristic peaks expected for [Ru(phend)₂bpy]²⁺. The UV‐vis spectrophotometric results indicate that the [Ru(phend)₂bpy]²⁺ concentration inside the ZrP layers increased as a function of the loading level. The exchanged [Ru(phend)₂bpy]²⁺ exhibited luminescence even at low concentration. Modified CPEs were constructed and analyzed using cyclic voltammetry. The intercalated mediator remained electroactive within the layers (E°′=–38.5 mV vs. Ag/AgCl, 3.5 M NaCl) and electrocatalysis of NADH oxidation was observed. The kinetics of the modified CPE shows a Michaelis–Menten behavior. This CPE was used for the oxidation of NADH in the presence of Bakers' yeast alcohol dehydrogenase. A calibration plot for ethanol is presented.