Cyclooctatetraenes through Valence Isomerization of Cubanes: Scope and Limitations

The scope and limitations of Eaton's rhodium(I)-catalyzed valence isomerization of cubane to cyclooctatetraene (COT) were investigated in the context of functional group tolerability, multiple substitution modes and the ability of cubane-alcohols to undergo one-pot tandem Ley–Griffith Wittig reactions in the absence of a transition metal catalyst.     

Ranking Oxidant Sensitiveness: A Guide for Synthetic Utility

Common oxidants used in chemical synthesis, including newly developed perruthenates, were evaluated in the context of understanding (and better appreciating) the sensitiveness and associated potential hazards of these reagents. Analysis using sealed cell differential scanning calorimetry (scDSC) facilitated Yoshida correlations, which were compared to impact sensitiveness and electrostatic discharge experiments (ESD), that enabled sensitiveness ranking. Methyltriphenylphoshonium perruthenate (MTP3, 8 ), isoamyltriphenylphosphonium perruthenate (ATP3, 7 ) and tetraphenylphosphonium perruthenate (TP3, 9 ) were found to be the most sensitive followed by 2-iodoxybenzoic acid (IBX, 2 ) and benzoyl peroxide (BPO, 10 ), whereas the most benign were observed to be Oxone ( 12 ), manganese dioxide (MnO₂, 13 ), and N-bromosuccinimide (NBS, 17 ).     

Backbone cleavages of [M - H](-) anions of peptides. Cyclisation of citropin 1 peptides involving reactions between the C-terminal [CONH](-) residue and backbone amide carbonyl groups. A new type of beta cleavage: a joint experimental and theoretical study

This paper reports the study of backbone cleavages in the collision-induced negative-ion mass spectra of the [M - H](-) anions of some synthetic modifications of the bioactive amphibian peptide citropin 1 (GLFDVIKKVASVIGGL-NH(2)). The peptides chosen for study contain no amino acid residues which could effect facile side-chain cleavage, i.e. Ser (-CH(2)O, side-chain cleavage) and Asp (-H(2)O) are replaced by Ala or Lys. We expected that such peptides should exhibit standard and pronounced peaks due to alpha cleavage ions (and to a lesser extent beta cleavage ions) in their collision-induced negative-ion spectra. This expectation was realised, but the spectra also contained peaks formed by a new series of cleavage anions. These are produced following cyclisation of the C-terminal CONH(-) moiety at carbonyl functions of amide groups along the peptide backbone; effectively transferring the NH of the C-terminal CONH(-) group to other amino acid residues. We have called the product anions of these processes beta' ions, in order to distinguish them from standard beta ions. Some beta' ions also fragment directly to some other beta' ions of smaller mass. The reaction coordinates of alpha,beta and beta' backbone processes have been calculated at the HF/6-31G*//AM1 level theory for simple model systems. The initial cyclisation step of the beta' sequence is barrierless and exothermic. Subsequent steps have a maximum barrier of +40 kcal mol(-1), with the overall reaction being endothermic by some 30 kcal mol(-1) at the level of theory used. These calculations take no account of the complexity of the conformationally flexible peptide system, and it is surprising that each of the two reacting centres can 'find' each other in such a large system.     

The effect of macromolecular architecture in nanomaterials: a comparison of site isolation in porphyrin core dendrimers and their isomeric linear analogues

The influence of macromolecular architecture on the physical properties of polymeric materials has been studied by comparing poly(benzyl ether) dendrons with their exact linear analogues. The results clearly confirm the anticipation that dendrimers are unique when compared to other architectures. Physical properties, from hydrodynamic volume to crystallinity, were shown to be different, and in a comparative study of core encapsulation in macromolecules of different architecture, energy transduction from the polymer backbone to a porphyrin core was shown to be different for dendrimers as compared to that of isomeric four- or eight-arm star polymers. Fluorescence excitation revealed strong, morphology dependent intramolecular energy transfer in the three macromolecular isomers investigated. Even at high generations, the dendrimers exhibited the most efficient energy transfer, thereby indicating that the dendritic architecture affords superior site isolation to the central porphyrin it surrounds.     

The synthesis of 1-methyl-1-germaadamantane

The syntheses of 1-methyl-1-germaadamantane and 1-chloro-1-germaadamantane are described. Attempts to prepare the 1-methyl-1-stannaadamantane and the novel cage systems, 1-silatris-nor- and 1-silatris-homo-adamantanes are also described as well as the syntheses of a variety of Group IV 1,3,5-trisubstituted cyclohexanes.     

Evaluation of the swab test on premises for detection of antimicrobial residues in bovine and porcine kidneys

The effect of sample matrix on the sensitivity of the Swab Test On Premises (STOP) was evaluated for selected antimicrobials. Fluid was extracted from bovine and porcine kidneys, and fortified with known levels of drugs. Aqueous standards were also prepared at the same levels. An aliquot of the fortified fluid or water was pipeted onto a dry swab which was placed onto the surface of a STOP plate, and the plate was incubated as outlined in the test kit manual. Zones of bacterial growth inhibition were measured and recorded, and additional testing was performed with decreasing levels of drug until a minimum detectable level was determined. The effect of temperature on the sensitivity of the test was also evaluated by running samples in duplicate, one set at a nominal temperature of 28 degrees C, and the second set at a nominal temperature of 32 degrees C. Fortified bovine kidney fluid produced significantly larger zones than did porcine kidney fluid at both temperatures, but the mean zone sizes for fortified water were not significantly different from those of bovine or porcine kidney fluid at either temperature. For all 3 matrixes, zones of inhibition were significantly larger at 28 degrees than 32 degrees C.     

Simple method for the assay of linezolid in Brain Heart Infusion broth by high-performance liquid chromatography

A simple HPLC method was developed and validated for quantification of linezolid in Brain Heart Infusion (BHI) broth. Eperezolid was employed as internal standard and the sample pre-treatment procedure was simple. Calibration standards ranged from 0.05 to 16 mg/L. Accuracy was within 7.8% and reproducibility (RSD) was less than 8.3%. Recovery was approximately 100% at all concentrations examined. Linezolid was stable in the autosampler insert for at least 24 h at ambient temperature and in BHI for 72 h at 37 degrees C. This assay is rapid and ideal for analysis of a large number of samples.     

Crystal structures of dicarboxy-2,2'-bipyridyl complexes: the role of hydrogen bonding and stacking interactions

The crystal structures of three complexes of dicarboxy-2,2'-bipyridyl ligands, 5,5'-dicarboxy-2,2'-bipyridyl (1) and 4,4'-dicarboxy-2,2'-bipyridyl (2) are reported. [Rh(1H)3] shows two interpenetrating, homochiral rhombohedral networks linked by short carboxylate-carboxylic acid hydrogen bonds, in which each complex acts as a node for six hydrogen bonds. [Ru(1H2)(1H)2] forms only four such hydrogen bonds, leading to the formation of heterochiral chains held together by stacking between bipyridyls. [Co(2H)3] can in principle form six hydrogen bonds, but in practice forms only four in a layer structure where stacking interactions are important. This is attributed to differences in molecular shape.     

Synthesis and oxygenation of a nickel(II) and zinc(II) dithiolate: an experimental and theoretical comparison

The diamino-dithiolato N2S2 ligand N,N'-bis-2-methyl-mercaptopropyl-N,N'-dimethylethylenediamine, H2bmmp-dmed), and its nickel (1) and zinc (2) complexes have been prepared and their reactivities with hydrogen peroxide investigated. Complex 1 yields a mixture of sulfenato (RSO-), 4, sulfinato (RSO2-), 3, and sulfonato (RSO3-), 5, products upon addition of H2O2. Products are separable by column chromatography. Stoichiometric addition of H2O2 to 2 yields an inseparable mixture. Excess peroxide addition results in oxygenation of the ligand to the disulfonate, 6, and decomplexation of zinc. Complexes 1, 2, and 3 and compound 6 have been investigated by X-ray crystallography, and their structures are reported. Density functional theory (DFT) calculations of 1 and 2 reveal significant sulfur p character in the HOMO of each complex. However, 1 also shows significant metal d character that is pi-antibonding with respect to the sulfur p orbitals. Complex 2 shows little metal character in the HOMO. Implications of the HOMO with respect to S-centered reactivity and metal ligand distances in S-oxygenated products are provided.     

Novel one-dimensional structures and solution behaviour of copper(II) bromide and chloride complexes of a new pentapyridyldiamine ligand

Copper(II) bromide and chloride complexes of the new heptadentate ligand 2,6-bis(bis(2-pyridylmethyl)amino)methylpyridine (L) have been prepared. For the bromide complexes, chains of novel, approximately C2-symmetric, chiral [Cu2(L)Br2]2+ 'wedge-shaped' tectons are found. The links between the dicopper tectons and the overall chirality and packing of the chains are dictated by the bromide ion content, not the counter anion. In contrast, the chloride complexes exhibit linked asymmetric [Cu2(L)Cl3]+ tectons with distinct N3CuCl2 and N4CuCl2 centres in the solid. The overall structures of the dicopper bromide and chloride units persist in solution irrespective of the halide. The redox chemistry of the various species is also described.