Heterogeneous nucleation of nitric acid trihydrate on clay minerals: relevance to type ia polar stratospheric clouds

Although critical to atmospheric modeling of stratospheric ozone depletion, selective heterogeneous nuclei that promote the formation of Type Ia polar stratospheric clouds (PSCs) are largely unknown. While mineral particles are known to be good ice nuclei, it is currently not clear whether they are also good nuclei for PSCs. In the present study, a high-vacuum chamber equipped with transmission Fourier transform infrared spectroscopy and a quadrupole mass spectrometer was used to study heterogeneous nucleation of nitric acid trihydrate (NAT) on two clay minerals-Na-montmorillonite and kaolinite-as analogs of atmospheric terrestrial and extraterrestrial minerals. The minerals are first coated with a 3:1 supercooled H2O/HNO3 solution prior to the observed nucleation of crystalline NAT. At 220 K, NAT formation was observed at low SNAT values of 12 and 7 on kaolinite and montmorillonite clays, respectively. These are the lowest SNAT values reported in the literature on any substrate. However, NAT nucleation exhibited significant temperature dependence. At lower temperatures, representative of typical polar stratospheric conditions, much higher supersaturations were required before nucleation was observed. Our results suggest that NAT nucleation on mineral particles, not previously treated with sulfuric acid, may not be an important nucleation platform for Type Ia PSCs under normal polar stratospheric conditions.     

Color kinetic nanoparticles

Eu3+ doped LaF3 nanoparticles functionalized with a 3-4 formylphenyl benzoic acid ligand were synthesized. Excitation energy-dependent energy transfer from the ligand to Eu3+ yields color tunability from the red to greenish-blue as a function of excitation wavelengths. This synthetic approach provides large shifts in the resultant chromaticity with an excitation wavelength including the generation of white light.     

Spatially resolved product formation in the reaction of formic acid with calcium carbonate (1014): the role of step density and adsorbed water-assisted ion mobility

The reaction of calcium carbonate (1014) single-crystal surfaces with formic acid (HCOOH) vapor was investigated using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). AFM images indicate the reaction produces rather well-defined crystallites, preferentially at step edges and at distinct angles to one another and mirroring the rhombohedral structure of the calcite surface, while exposing unreacted carbonate surface. The size and surface density of the crystallites depend upon substrate step density, exposure time, and relative humidity. XPS data confirmed the crystallite composition as the expected calcium formate product. The AFM images show erosion and pit formation of the calcite surface in the vicinity of the product crystallites, clearly providing the spatially resolved characterization of the source of Ca ions. AFM experiments exploring the effects of water vapor on the reacted surface show that the calcium formate crystallites are mobile under conditions of high relative humidity, combining to form larger crystallites and nanometer-sized crystals with an orthorhombohedral habit consistent with the alpha form, as confirmed by X-ray diffraction. The implications for the reactions described here are discussed.     

Electrochemistry of non-redox-active poly(propylenimine) and poly(amidoamine) dendrimers at liquid-liquid interfaces

The electrochemistry of a series of dendrimers was examined at the interface between two immiscible electrolyte solutions (ITIES), enabling study of non-redox-active dendrimers. Different generations of poly(propylenimine) (DAB-AM-n) and poly(amidoamine) (PAMAM) dendrimers were studied. In their protonated states, the dendrimers were transferred across the ITIES, with the electrochemical behavior observed depending on the dendrimer family, the generation number, and the experimental pH. The electrochemistry of the lower generations studied was characterized by well-defined peaks for both dendrimer families and with small peak-peak separations in the case of the PAMAM family. The voltammetry of the higher generations was more complex, showing distorted voltammograms and instability of the interface. The charges of the transferring dendrimers were calculated by convolution of the voltammetric data and were similar to the theoretical charges for DAB-AM-n. For PAMAM, only the lowest generation exhibited reversible behavior, with higher generations having irreversible behavior. Using cyclic voltammetry, low micromolar concentrations of the dendrimers were detected. The results show that electrochemistry at the ITIES can be a useful method for characterization of ionizable dendrimers and that voltammetry can be a simple method for detection of low concentrations of these multicharged species.     

On the chemical processing of hydrocarbon surfaces by fast oxygen ions

Solid methane (CH(4)), ethane (C(2)H(6)), and ethylene (C(2)H(4)) ices (thickness: 120 ± 40 nm; 10 K), as well as high-density polyethylene (HDPE: [C(2)H(4)](n)) films (thickness: 130 ± 20 nm; 10, 100, and 300 K), were irradiated with mono-energetic oxygen ions (Φ ~ 6 × 10(15) cm(-2)) of a kinetic energy of 5 keV to simulate the exposure of Solar System hydrocarbon ices and aerospace polymers to oxygen ions sourced from the solar wind and planetary magnetospheres. On-line Fourier-transform infrared spectroscopy (FTIR) was used to identify the following O(+) induced reaction pathways in the solid-state: (i) ethane formation from methane ice via recombination of methyl (CH(3)) radicals, (ii) ethane conversion back to methane via methylene (CH(2)) retro-insertion, (iii) ethane decomposing to acetylene via ethylene through successive hydrogen elimination steps, and (iv) ethylene conversion to acetylene via hydrogen elimination. No changes were observed in the irradiated PE samples via infrared spectroscopy. In addition, mass spectrometry detected small abundances of methanol (CH(3)OH) sublimed from the irradiated methane and ethane condensates during controlled heating. The detection of methanol suggests an implantation and neutralization of the oxygen ions within the surface where atomic oxygen (O) then undergoes insertion into a C-H bond of methane. Atomic hydrogen (H) recombination in forming molecular hydrogen and recombination of implanted oxygen atoms to molecular oxygen (O(2)) are also inferred to proceed at high cross-sections. A comparison of the reaction rates and product yields to those obtained from experiments involving 5 keV electrons, suggests that the chemical alteration of the hydrocarbon ice samples is driven primarily by electronic stopping interactions and to a lesser extent by nuclear interactions.     

Serum-protein effects on the detection of the β-blocker propranolol by ion-transfer voltammetry at a micro-ITIES array

In this work, the effect of the serum protein, bovine serum albumin (BSA), on the detection of propranolol in artificial serum by ion-transfer voltammetry at an array of micro-interfaces between two immiscible electrolyte solutions (μITIES) is presented. Cyclic voltammetry (CV), differential pulse voltammetry (DPV), and differential pulse stripping voltammetry (DPSV) were examined for the detection of low concentrations of propranolol. Both CV and DPV had an interference effect from BSA, manifested as lower currents in the presence of the protein. DPSV proved to be the most effective technique, enabling the detection of 0.05 μM propranolol in the presence of BSA. The DPSV method employed a preconditioning step as well as a preconcentration step followed by the analytical signal generation step. The latter was based on the back-transfer of the drug across the μITIES. The preconcentration step was crucial to prevention of the adverse effects of BSA on the voltammetric detection. These results demonstrate that serum-protein effects on drug detection at low concentrations can be eliminated by use of DPSV at arrays of μITIES. CVs of propranolol with increasing concentrations of BSA revealed the influence of the drug-protein binding interaction, with decreases in current but no change in transfer potential. Therapeutic concentrations of propranolol were detected, demonstrating the viability of this approach for bioanalytical investigations.     

Symmetric hydrogen bonding in dimethyl­ammonium hydrogen diphenyl­diphospho­nate

In the title compound, C₂H₈N⁺·C₁₂H₁₁O₅P₂⁻, pairs of hydrogen diphenyl­diphospho­nate anions form dimers across a twofold axis, with two symmetric O⋯H⋯O hydrogen bonds [O⋯O = 2.406 (3) and 2.418 (3) Å]. The 12‐membered ring thus formed has crystallographic 2 and quasi‐222 symmetry. Cations on either side of the ring form N—H⋯O hydrogen bonds to the four extraannular O atoms, with N⋯O distances of 2.765 (2) and 2.748 (3) Å.     

Water adsorption on clay minerals as a function of relative humidity: application of BET and Freundlich adsorption models

Water adsorption on kaolinite, illite, and montmorillonite clays was studied as a function of relative humidity (RH) at room temperature (298 K) using horizontal attenuated total reflectance (HATR) Fourier transform infrared (FTIR) spectroscopy equipped with a flow cell. The water content as a function of RH was modeled using the Brunauer, Emmett, and Teller (BET) and Freundlich adsorption isotherm models to provide complementary multilayer adsorption analysis of water uptake on the clays. A detailed analysis of model fit integrity is reported. From the BET fit to the experimental data, the water content on each of the three clays at monolayer (ML) water coverage was determined and found to agree with previously reported gravimetric data. However, BET analysis failed to adequately describe adsorption phenomena at RH values greater than 80%, 50%, and 70% RH for kaolinite, illite, and montmorillonite clays, respectively. The Freundlich adsorption model was found to fit the data well over the entire range of RH values studied and revealed two distinct water adsorption regimes. Data obtained from the Freundlich model showed that montmorillonite has the highest water adsorption strength and highest adsorption capacity at RH values greater than 19% (i.e., above ML water adsorption) relative to the kaolinite and illite clays. The difference in the observed water adsorption behavior between the three clays was attributed to different water uptake mechanisms based on a distribution of available adsorption sites. It is suggested that different properties drive water adsorption under different adsorption regimes resulting in the broad variability of water uptake mechanisms.     

Novel protein kinase D inhibitors cause potent arrest in prostate cancer cell growth and motility

Background  

Protein kinase D (PKD) has been implicated in a wide range of cellular processes and pathological conditions including cancer. However, targeting PKD therapeutically and dissecting PKD-mediated cellular responses remains difficult due to lack of a potent and selective inhibitor. Previously, we identified a novel pan-PKD inhibitor, CID755673, with potency in the upper nanomolar range and high selectivity for PKD. In an effort to further enhance its selectivity and potency for potential in vivo application, small molecule analogs of CID755673 were generated by modifying both the core structure and side-chains.     

Cross‐Linking and Degradation Properties of Plasma Enhanced Chemical Vapor Deposited Poly(2‐hydroxyethyl methacrylate)

Plasma Enhanced Chemical Vapor Deposition (PECVD) of poly‐2‐hydroxyethyl methacrylate (pHEMA) biocompatible, biodegradable polymer films were produced alone and cross‐linked with ethylene glycol diacrylate (EGDA). Degree of cross‐linking was controlled via manipulation of the EGDA flow rate, which influenced the amount of swelling and the extent of degradation of the films in an aqueous solution over time. Noncross‐linked pHEMA films swelled 10% more than cross‐linked films after 24 h of incubation in an aqueous environment. Increasing degree of film cross‐linking decreased degradation over time. Thus, PECVD pHEMA films with variable cross‐linking properties enable tuning of gel formation and degradation properties, making these films useful in a variety of biologically significant applications.