Does a Photocatalytic Synergy in an Anatase–Rutile TiO2 Composite Thin‐Film Exist?

It has often been suggested that anatase–rutile mixtures/composites synergistically enhance photocatalysis. However, in the case of dense thin‐films containing an intimate mix of both anatase and rutile phases, such an effect has not been observed. In synthesising combinatorial films with graded film thickness and phase, and applying established photocatalytic mapping methods, we were able to assess how dense thin‐films of intimately mixed anatase–rutile mixtures affect photocatalytic performance. We found that no photocatalytic synergy between anatase–rutile composites (29≤rutile %≤83) within such dense thin‐film systems exists. In fact, an increased presence of rutile caused the photocatalytic activity to fall. This was explained by the unfavourable energetics in the multiple electron transfers required between several neighbouring rutile and anatase sites for the photo‐generated electron to reach the material’s surface; encouraging the trapping of electrons within the bulk and increasing the likelihood of charge recombination. The decrease in photocatalytic activity was found to vary linearly with rutile component.     

Synthesis and properties of water-soluble gold colloids covalently derivatized with neutral polymer monolayers

Citrate-capped gold nanoparticles as well as planar gold surfaces can be efficiently grafted with a covalently attached polymer monolayer a few nanometers thick, by simple contact of the metal surface with dilute aqueous solutions of hydrophilic polymers that are end-capped with disulfide moieties, as shown by UV/vis absorption, dynamic light scattering, and surface plasmon resonance studies. The hydrophilic polymer-coated gold colloids can be freeze-dried and stored as powders that can be subsequently dissolved to yield stable aqueous dispersions, even at very large concentrations. They allow for applying filtrations, gel permeation chromatography, or centrifugation. They do not suffer from undesirable nonspecific adsorption of proteins while allowing the diffusion of small species within the hydrogel surface coating. In addition, specific properties of the original hydrophilic polymers are retained such as a lower critical solution temperature. The latter feature could be useful to enhance optical responses of functionalized gold surfaces toward interaction with various substrates.     

Synthesis of a homoleptic niobium(V) thiolate complex and the preparation of niobium sulfide via thio "sol-gel" and vapor phase thin-film experiments

Reaction of [Nb(NMe(2))(5)] with 10 equiv of 2,6-Me(2)C(6)H(3)SH in toluene results in the formation of red crystals of [Nb(SC(6)H(3)Me(2)-2,6)(5)]. Crystal structure analysis of [Nb(SC(6)H(3)Me(2)-2,6)(5)] showed that the niobium center adopts a distorted trigonal bipyramidal geometry. Niobium disulfide, NbS(2), has been successfully prepared via a thio "sol-gel" process using [Nb(SC(6)H(3)Me(2)-2,6)(5)] as the metal source. In contrast, vapor phase thin-film studies revealed that [Nb(SC(6)H(3)Me(2)-2,6)(5)] functions as a single-source precursor to NbS films.     

Diverse evolution of [[Ph(2)P(CH(2))(n)PPh(2)]Pt(mu-S)(2)Pt[Ph(2)P(CH(2))(n)PPh(2)]] (n = 2, 3) metalloligands in CH(2)Cl(2)

The nucleophilicity of the [Pt(2)S(2)] core in [[Ph(2)P(CH(2))(n)PPh(2)]Pt(mu-S)(2)Pt[Ph(2)P(CH(2))(n)PPh(2)]] (n = 3, dppp (1); n = 2, dppe (2)) metalloligands toward the CH(2)Cl(2) solvent has been thoroughly studied. Complex 1, which has been obtained and characterized by X-ray diffraction, is structurally related to 2 and consists of dinuclear molecules with a hinged [Pt(2)S(2)] central ring. The reaction of 1 and 2 with CH(2)Cl(2) has been followed by means of (31)P, (1)H, and (13)C NMR, electrospray ionization mass spectrometry, and X-ray data. Although both reactions proceed at different rates, the first steps are common and lead to a mixture of the corresponding mononuclear complexes [Pt[Ph(2)P(CH(2))(n)PPh(2)](S(2)CH(2))], n = 3 (7), 2 (8), and [Pt[Ph(2)P(CH(2))(n)PPh(2)]Cl(2)], n = 3 (9), 2 (10). Theoretical calculations give support to the proposed pathway for the disintegration process of the [Pt(2)S(2)] ring. Only in the case of 1, the reaction proceeds further yielding [Pt(2)(dppp)(2)[mu-(SCH(2)SCH(2)S)-S,S']]Cl(2) (11). To confirm the sequence of the reactions leading from 1 and 2 to the final products 9 and 11 or 8 and 10, respectively, complexes 7, 8, and 11 have been synthesized and structurally characterized. Additional experiments have allowed elucidation of the reaction mechanism involved from 7 to 11, and thus, the origin of the CH(2) groups that participate in the expansion of the (SCH(2)S)(2-) ligand in 7 to afford the bridging (SCH(2)SCH(2)S)(2-) ligand in 11 has been established. The X-ray structure of 11 is totally unprecedented and consists of a hinged [(dppp)Pt(mu-S)(2)Pt(dppp)] core capped by a CH(2)SCH(2) fragment.     

A new pyridine-based 12-membered macrocycle functionalised with different fluorescent subunits; coordination chemistry towards Cu(II), Zn(II), Cd(II), Hg(II), and Pb(II)

The coordination chemistry of the new pyridine-based, N2S2-donating 12-membered macrocycle 2,8-dithia-5-aza-2,6-pyridinophane (L1) towards Cu(II), Zn(II), Cd(II), Hg(II), and Pb(II) has been investigated both in aqueous solution and in the solid state. The protonation constants for L1 and stability constants with the aforementioned metal ions have been determined potentiometrically and compared with those of ligand L2, which contains a N-aminopropyl side arm. The measured values show that Hg(II) in water has the highest affinity for both ligands followed by Cu(II), Cd(II), Pb(II), and Zn(II). For each metal ion considered, 1:1 complexes with L1 have also been isolated in the solid state, those of Cu(II) and Zn(II) having also been characterised by X-ray crystallography. In both complexes L1 adopts a folded conformation and the coordination environments around the two metal centres are very similar: four positions of a distorted octahedral coordination sphere are occupied by the donor atoms of the macrocyclic ligand, and the two mutually cis-positions unoccupied by L1 accommodate monodentate NO3- ligands. The macrocycle L1 has then been functionalised with different fluorogenic subunits. In particular, the N-dansylamidopropyl (L3), N-(9-anthracenyl)methyl (L4), and N-(8-hydroxy-2-quinolinyl)methyl (L5) pendant arm derivatives of L1 have been synthesised and their optical response to the above mentioned metal ions investigated in MeCN/H2O (4:1 v/v) solutions.     

An Easy Way Toward ε‐Caprolactone Macromonomers by Microwave Irradiation Using Early Lanthanide Halides as Catalysts

Poly(ε‐caprolactone) macromonomers were synthesized under microwave irradiation from commercial caprolactone, using commercial hydrated lanthanide halides as catalysts. The molecular weight of the polymers was in the range 3 000–5 000. Higher molecular weights (5 000–20 000) and lower polydispersity indices were obtained with THF adducts of the lanthanide halides as catalysts and also by applying longer reaction times or using diethylene glycol as a coupling reagent.     

Structure,biosynthetic origin,and engineered biosynthesis of calcium-dependent antibiotics from Streptomyces coelicolor

The calcium-dependent antibiotic (CDA), from Streptomyces coelicolor, is an acidic lipopeptide comprising an N-terminal 2,3-epoxyhexanoyl fatty acid side chain and several nonproteinogenic amino acid residues. S. coelicolor grown on solid media was shown to produce several previously uncharacterized peptides with C-terminal Z-dehydrotryptophan residues. The CDA biosynthetic gene cluster contains open reading frames encoding nonribosomal peptide synthetases, fatty acid synthases, and enzymes involved in precursor supply and tailoring of the nascent peptide. On the basis of protein sequence similarity and chemical reasoning, the biosynthesis of CDA is rationalized. Deletion of SCO3229 (hmaS), a putative 4-hydroxymandelic acid synthase-encoding gene, abolishes CDA production. The exogenous supply of 4-hydroxymandelate, 4-hydroxyphenylglyoxylate, or 4-hydroxyphenylglycine re-establishes CDA production by the DeltahmaS mutant. Feeding analogs of these precursors to the mutant resulted in the directed biosynthesis of novel lipopeptides with modified arylglycine residues.     

Development and evaluation of a nano-electrospray ionisation source for atmospheric pressure ion mobility spectrometry

A nano-electrospray ionisation source has been designed and constructed for a high temperature ion mobility spectrometer. The drift cell was modified by replacement of the 63Ni atmospheric pressure chemical ionisation source with a tube lens/desolvation region and operated using commercial nano-electrospray capillaries. Ions were introduced into the drift region via a Bradbury-Nielson gate (pulse width 50 micros, repetition period 20 ms). A unidirectional flow of nitrogen was used as the drift gas at temperatures in the range 100-150 degrees C to aid desolvation. The performance of the nano-electrospray ion source has been demonstrated for analytes including crown ethers, amino acids and peptides. Reduced mobilities determined by nano-ESI were consistent with those reported using a 63Ni ion source.     

Characterization of low-molecular weight peptides in champagne wine by liquid chromatography/tandem mass spectrometry

This paper reports the use of an on-line LC–ESI–MS/MS method for the identification and quantification of di- and tripeptides in champagne wine without laborious sample pretreatment. The identification of these compounds, in their underivatised form, is based on identical retention times and ESI–MS spectra to those of reference standards. The presence of nine dipeptides (Arg–Ile, Ile–Arg, Ile–Val, Lys–Phe, Lys–Tyr, Phe–Lys, Tyr–Gln, Tyr–Lys, Val–Ile) and the absence of two tripeptides (Phe–Arg–Arg and Lys–Met–Asn) have been evidenced in the matrix. Calibration curves for each analyte were established using Phe–Arg as internal standard. The calibration curves were linear in the concentration range 0.1–10 mg L⁻¹ with a determination coefficient, r², better than 0.992. The accuracy for the calibration standard was estimated at between 92 and 102%. This method allows high recovery and satisfies the necessary requirements with respect to accuracy, repeatability and sensitivity. The first application of this analytical method to the measurement of di- and tri-peptides in different vintages of champagne wine is reported. Compositional changes in the peptides occurred depending on the vintage.     

New “hyphenated” CPC-HPLC-DAD-MS strategy for simultaneous isolation, analysis and identification of phytochemicals: application to xanthones from Garcinia mangostana

Centrifugal partition chromatography (CPC) coupled online with high-performance liquid chromatography (HPLC) with diode-array detection (DAD) and mass spectrometry (MS) is presented in this work. This strategy offers the possibility to obtain simultaneously CPC fractionation of natural extracts, the HPLC fingerprint of separated fractions and structural information on molecules contained in each fraction. This new approach was applied to the fractionation and purification of xanthones from Garcinia mangostana (Clusiaceae) pericarp. A biphasic solvent system of heptane/ethyl acetate/methanol/water (2:1:2:1, v/v) was used for the CPC separation of 175?mg crude ethanolic extract. The HPLC analysis was conducted with a reversed-phase monolithic column allowing fast and repeatable separation. This combined CPC-HPLC-DAD-MS method led to isolation of 33?mg α-mangostin and 6?mg γ-mangostin at 98?% and 98.5?% purity, respectively, in 140?min. Furthermore, in the same time a total of 16 other xanthones were detected in the extract, and ten of them were identified on the basis of their UV and MS spectra.