Simple HPLC‐UV for the quantification of a new leishmanicidal candidate (E)‐1‐4(trifluoromethyl) benzylidene)‐5‐(2‐4‐dichlorozoyl) carbonylhydrazine (LASSBio‐1736) in rat plasma for pharmacokinetics assessment

In this study, a sensitive HPLC‐UV assay was developed and validated for the determination of LASSBio‐1736 in rat plasma with sodium diclofenac as internal standard (IS). Liquid–liquid extraction using acetonitrile was employed to extract LASSBio‐1736 and IS from 100 μL of plasma previously basified with NaOH 0.1 M. Chromatographic separation was carried on Waters Spherisorb^®S5 ODS2 C₁₈ column (150 × 4.6 mm, 5 μm) using an isocratic mobile phase composed by water with triethylamine 0.3% (pH 4), methanol and acetonitrile grade (45:15:40, v/v/v) at a flow rate of 1 mL/min. Both LASSBio‐1736 and IS were eluted at 4.2 and 5 min, respectively, with a total run time of 8 min only. The lower limit of quantification was 0.2 μg/mL and linearity between 0.2 and 4 μg/mL was obtained, with an R² > 0.99. The accuracy of the method was >90.5%. The relative standard deviations intra and interday were <6.19 and <7.83%, respectively. The method showed the sensitivity, linearity, precision, accuracy and selectivity required to quantify LASSBio‐1736 in preclinical pharmacokinetic studies according to the criteria established by the US Food and Drug Administration and European Medicines Agency. Copyright © 2016 John Wiley & Sons, Ltd.     

The powder X-band electron paramagnetic resonance spectroscopy of septet pyridyl-2,4,6-trinitrene

The first X-band EPR spectrum containing only non-overlapping signals of septet pyridyl-2,4,6-trinitrene and triplet pyridylnitrenes is reported. This spectrum was recorded after photolysis of 2,4,6-triazidopyridine in solid argon at 5 K. The zero-field splitting (ZFS) parameters of this trinitrene as well as of intermediate triplet mononitrenes and quintet dinitrenes formed at early stages of the photolysis were determined using the combination of modern computer line-shape spectral simulations and density functional theory (DFT) calculations. It was found that septet pyridyl-2,4,6-trinitrene has the record negative parameter D_S = −0.1031 cm⁻¹ among all known to date septet pyridyl-2,4,6-trinitrenes and may be of interest as a model multi-qubit spin system for investigations of quantum computation processing.     

Development of a method for quantitative determination of the cytotoxic agent piplartine (piperlongumine) in multiple skin layers

This study reports the development of a simple and reproducible method, with high rates of recovery, to extract the cytotoxic agent piplartine from skin layers, and a sensitive and rapid UV‐HPLC method for its quantification. Considering the potential of piplartine for topical treatment of skin cancer, this method may find application for formulation development and pharmacokinetics studies to assess cutaneous bioavailability. Porcine skin was employed as a model for human tissue. Piplartine was extracted from the stratum corneum (SC) and remaining viable skin layers (VS) using methanol, vortex homogenization and bath sonication, and subsequently assayed by HPLC using a C₁₈ column, and 1:1 (v/v) acetonitrile–water (adjusted to pH 4.0 with acetic acid 0.1%) as mobile phase. The quantification limit of piplartine was 0.2 μg/mL (0.6 μm ), and the assay was linear up to 5 μg/mL (15.8 μm ), with within‐day and between‐days assay coefficients of variation and relative errors <15%. Piplartine recovery from SC and VS varied from 86 to 96%. The method was suitable to assay samples from skin penetration studies, enabling detection of differences in cutaneous delivery in different skin compartments resulting from treatment with various formulations and time periods.     

Magnetic behavior of a nano-disk constrained in an antiferromagnetic substrate

In this work we report a numerical Monte Carlo study of the behavior of a magnetic nano-disk put over an antiferromagnetic substrate. Three approaches were considered for describe the substrate: (1) A stacked antiferromagnetic configuration, (2) an Ising like arrangement and (3) Heisenberg like spins. For the Heisenberg case we still have considered an easy-plane and an easy-axis symmetry of the substrate. The hysteresis loop for the nano-disk is obtained by considering the three cases. The signature of the vortex in the nano-disk appears as small jumps in the hysteresis curve. Exchange bias effects are observed since the substrate has an easy axis symmetry.     

Motion planning and actuator specialization in the control of active-flexible link robots

Trajectory planning is a well-known open-loop control strategy to minimize residual vibrations in point-to-point tasks of systems featuring mechanical flexibility. However, the major drawback of open-loop control is its limitation in coping with modeling uncertainty. In this paper a novel approach to trajectory planning based on LQR theory is proposed and applied to a single flexible link robot. To improve performance under parameter uncertainty the strategy is combined with collocated vibration control through piezoelectric actuation of the link. This combination raises the issue of the roles and the contribution of each actuator type to the overall performance of the maneuver. An actuator specialization is proposed where the joint controller is responsible for the gross vibrationless motion of the link, while the link actuators are expected to deal only with residual vibrations that may arise from modeling errors. Simulation and experimental results validate the trajectory planning methodology and the combination of the open-loop strategy with collocated vibration control.     

Green solvent approach for printable large deformation thermoplastic elastomer based piezoresistive sensors and their suitability for biomedical applications

Composites based on biocompatible thermoplastic elastomer styrene‐ethylene/butylene‐styrene (SEBS) as matrix and multi‐walled carbon nanotubes (MWCNT) as nanofillers show excellent mechanical and piezoresistive properties from low to large deformations. The MWCNT/SEBS composites have been prepared following a green solvent approach, to extend their range of applicability to biomedical applications. The obtained composites with 2, 4, and 5 wt % MWCNT content provide suitable piezoresistive response up to 80% deformation with a piezoresistive sensibility near 2.7, depending on the applied strain and MWCNT content. Composite sensors were also developed by spray and screen printing and integrated with an electronic data acquisition system with RF communication. The possibility to accurately control the composites properties and performance by varying MWCNT content, viscosity, and mechanical properties of the polymer matrix, shows the large potential of the system for the development of large deformation printable piezoresistive sensors. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2092–2103     

Phylogenetic analysis and homology modelling of <Emphasis Type="Italic">Paracentrotus lividus</Emphasis> nectin

The extracellular matrix protein Pl-nectin, a 210-kDa homodimer originally purified from sea urchin eggs, plays a crucial role in cell adhesion and embryonic morphogenesis. The compiled cDNA sequence, obtained by RT-PCR primer walking and 3′ RACE, identified a 984aa product containing a 23aa signal peptide and including all six internal peptides identified by protein microsequencing. The protein is a new member of the galactose-binding protein superfamily as it consists of six 151–156aa-long tandemly repeated domains (D1–D6), homologous to the discoidin-like domains, also known as F5/8-type C domains. Based on homology modelling, we present a three-dimensional structure (3D) for D5, identified as the prototype domain. The molecular modelling of the assembled Pl-nectin homodimer accounts for a Pl-nectin quaternary structure composed of two 105-kDa C-shaped monomers linked by a S–S bridge. The presence of an LDT motif between the first and the second exposed loops of the D2 domain suggests the binding of Pl-nectin to an integrin receptor. Altogether, the in silico analysis described here is consistent with previous biochemical reports and offers a basis for predictions to be experimentally tested.     

Einstein 4-manifolds and nonpositive isotropic curvature

We give conditions for the linear span of the positive L-weakly compact (resp. M-weakly compact) operators to be a Banach lattice under the regular norm, for that Banach lattice to have an order continuous norm, to be an AL-space or an AM-space.