Thermal and Microstructural Analysis of the Y–Ba–Cu–O/Ag Equilibrium Around the Critical Composition YBa2Cu3Ox/Ag 35 mass%

We studied the Y–Ba–Cu–O/Ag equilibrium diagram in oxygen atmosphere around the composition YBa₂Cu₃O_x/Ag35 mass%. We found a high thermal effect: the peritectic decomposition temperature of Y-123 phase is lowered from 1040 to 940°C. We demonstrate here that the nature of the phenomenon is not chemical. We explained it as the result of a mechanical segregation of Y-123 decomposition products from Y-123 phase, performed by silver. This revised version was published online in July 2006 with corrections to the Cover Date.     

Transition metal-catalysed organic reactions promoted by chelating or metallacycle-forming substrates

Chelating or metallacycle-forming substrates are very useful for directing organometallic reactions. This review covers the more recent research that has been carried out in the authors' laboratory. Rhodium(I)- and (III)-catalysed reactions of C---C coupling of butadiene with N-allylamides or N-alkylbutenamides are described. These reactions are controlled by the size and strength of the chelate ring formed by double-bond insertion into the crotyl-rhodium bond (formed from butadiene) and their regioselectivity can change with the oxidation state of the metal. Rhodium(I)-catalysed reactions of butadiene with enamides are also chelation controlled and lead to different products, depending on the substituents at nitrogen. Cobalt(II) metallacycles have been utilized for promoting some organic reactions. It has been shown that alkenes can be catalytically incorporated into cobaltacyclopentadiene rings, that spirocycles can be obtained from diynes, carbon monoxide and acrylic esters and that a Pauson-Khand-type reaction can be combined with a Michael-type reaction to prepare catalytically new cyclopentenones. The use of palladacycles, derived from norbornene insertion into aryl-palladium bonds, followed by cyclization, has allowed the selective functionalization of either end of the metallacycle and the formation of condensed rings. Conversion of a palladium(II) into a palladium(IV) metallacycle, and catalytic processes involving these intermediates, have been achieved. The formation of alkylaromatic palladacycles has also been exploited for the selective meta functionalization of the aromatic moiety by means of alkyl groups, accompanied by expulsion of the norbornene molecule.     

High-spin to low-spin relaxation kinetics in the [Fe(TRIM)2]Cl2 complex

A quasi-quantitative photo-induced low-spin (LS)-->high-spin (HS) conversion of FeII ions has been observed in the [Fe(TRIM)2]Cl2 complex by irradiating the sample with blue light (488 nm) at 10 K. The time dependence of the HS-->LS relaxation has been studied between 10 K and 44 K by means of magnetic susceptibility measurements. These relaxation curves could be satisfactorily fitted by mono-exponential decays including tunnelling effect except for temperatures below 30 K. The introduction of a distribution of vibrational frequencies into this model improved significantly the fits in the low-temperature range and gave a good agreement with the experimental data in the whole temperature range suggesting a multi-rate relaxation process in this complex.     

Applicability of the H NMR chemical shifts computed by the ab initio/GIAO-HF methodology to the study of geometrical features of Zn-porphyrin dimers

Several porphyrin dimers have been newly designed and synthesized to construct assemblies with 1,4-diazabicyclo[2.2.2]octane (DABCO) as a bidentate binding ligand. Semi empirical (AM1) and ab initio calculations have been used to study the assemblies generated by the organization of dimers and DABCO, including the computation of ¹H NMR complexation-induced chemical shifts using the ab initio/GIAO methodology. The diagnostic capacity of the theoretical method has been applied to explain experimental results and geometrical features of the complexes.     

Polarographic and voltammetric determination of trace amounts of 2-nitronaphthalene

The polarographic behaviour of 2-nitronaphthalene was investigated by DC tast polarography (DCTP) and differential pulse polarography (DPP), both at a dropping mercury electrode, and differential pulse voltammetry and adsorptive stripping voltammetry, both at a hanging mercury drop electrode. Optimum conditions have been found for the determination of 2-nitronaphthalene by the given methods in the concentration ranges of 2×10^–6–1×10^–4, 2×10^–7–1×10^–4, 1×10^–8–1×10^–4 and 2×10^–9–1×10^–8 M, respectively. Practical applicability of these techniques was demonstrated by the determination of 2-nitronaphthalene in drinking and river water after its preliminary separation and preconcentration using liquid–liquid and solid-phase extraction with limits of determination of 3×10^–10 M (drinking water) and 3×10^–9 M (river water).     

Contrasting behavior in azide pyrolyses: an investigation of the thermal decompositions of methyl azidoformate, ethyl azidoformate and 2-azido-N, N-dimethylacetamide by ultraviolet photoelectron spectroscopy and matrix isolation infrared spectroscopy

The thermal decompositions of methyl azidoformate (N3COOMe), ethyl azidoformate (N3COOEt) and 2-azido-N,N-dimethylacetamide (N3CH2CONMe2) have been studied by matrix isolation infrared spectroscopy and real-time ultraviolet photoelectron spectroscopy. N2 appears as an initial pyrolysis product in all systems, and the principal interest lies in the fate of the accompanying organic fragment. For methyl azidoformate, four accompanying products were observed: HNCO, H2CO, CH2NH and CO2, and these are believed to arise as a result of two competing decomposition routes of a four-membered cyclic intermediate. Ethyl azidoformate pyrolysis yields four corresponding products: HNCO, MeCHO, MeCHNH and CO2, together with the five-membered-ring compound 2-oxazolidone. In contrast, the initial pyrolysis of 2-azido-N,N-dimethyl acetamide, yields the novel imine intermediate Me2NCOCH=NH, which subsequently decomposes into dimethyl formamide (HCONMe2), CO, Me2NH and HCN. This intermediate was detected by matrix isolation IR spectroscopy, and its identity confirmed both by a molecular orbital calculation of its IR spectrum, and by the temperature dependence and distribution of products in the PES and IR studies. Mechanisms are proposed for the formation and decomposition of all the products observed in these three systems, based on the experimental evidence and the results of supporting molecular orbital calculations.     

N,N'-ethylenebis(pyridoxylideneiminato) and N,N'-ethylenebis(pyridoxylaminato): synthesis, characterization, potentiometric, spectroscopic, and DFT studies of their vanadium(IV) and vanadium(V) complexes

The Schiff base N,N'-ethylenebis(pyridoxylideneiminato) (H(2)pyr(2)en, 1) was synthesized by reaction of pyridoxal with ethylenediamine; reduction of H(2)pyr(2)en with NaBH(4) yielded the reduced Schiff base N,N'-ethylenebis(pyridoxylaminato) (H(2)Rpyr(2)en, 2); their crystal structures were determined by X-ray diffraction. The totally protonated forms of 1 and 2 correspond to H(6)L(4+), and all protonation constants were determined by pH-potentiometric and (1)H NMR titrations. Several vanadium(IV) and vanadium(V) complexes of these and other related ligands were prepared and characterized in solution and in the solid state. The X-ray crystal structure of [V(V)O(2)(HRpyr(2)en)] shows the metal in a distorted octahedral geometry, with the ligand coordinated through the N-amine and O-phenolato moieties, with one of the pyridine-N atoms protonated. Crystals of [(V(V)O(2))(2)(pyren)(2)].2 H(2)O were obtained from solutions containing H(2)pyr(2)en and oxovanadium(IV), where Hpyren is the "half" Schiff base of pyridoxal and ethylenediamine. The complexation of V(IV)O(2+) and V(V)O(2) (+) with H(2)pyr(2)en, H(2)Rpyr(2)en and pyridoxamine in aqueous solution were studied by pH-potentiometry, UV/Vis absorption spectrophotometry, as well as by EPR spectroscopy for the V(IV)O systems and (1)H and (51)V NMR spectroscopy for the V(V)O(2) systems. Very significant differences in the metal-binding abilities of the ligands were found. Both 1 and 2 act as tetradentate ligands. H(2)Rpyr(2)en is stable to hydrolysis and several isomers form in solution, namely cis-trans type complexes with V(IV)O, and alpha-cis- and beta-cis-type complexes with V(V)O(2). The pyridinium-N atoms of the pyridoxal rings do not take part in the coordination but are involved in acid-base reactions that affect the number, type, and relative amount of the isomers of the V(IV)O-H(2)Rpyr(2)en and V(V)O(2)-H(2)Rpyr(2)en complexes present in solution. DFT calculations were carried out and support the formation and identification of the isomers detected by EPR or NMR spectroscopy, and the strong equatorial and axial binding of the O-phenolato in V(IV)O and V(V)O(2) complexes. Moreover, the DFT calculations done for the [V(IV)O(H(2)Rpyr(2)en)] system indicate that for almost all complexes the presence of a sixth equatorial or axial H(2)O ligand leads to much more stable compounds.     

Studies on the chromatographic fractionation of Trichoderma reesei cellulases by hydrophobic interaction

This work reports new studies on cellulases fractionation by hydrophobic interaction chromatography. The purification procedure for the Trichoderma reesei cellulase complex consists of gel permeation chromatography on Sephadex G-25M followed by an ultrafiltration step. The concentrated enzyme solution was then fractionated on Sepharose CL-6B modified by covalent immobilization of 1,4-butanediol diglycidyl ether. The influence of the mobile phase composition on the chromatographic behaviour of the T. reesei cellulase complex was investigated. By using 13% (w/v) ammonium sulphate in eluent buffer, a selective separation of beta-glucosidase with a two-fold increase in specific activity and a recovery of 60% cellobiase activity were obtained. Other commercial hydrophobic supports (octyl- and phenyl-Sepharose) were also tested and compared under the same conditions.     

Spectrophotometric and derivative spectrophotometric determination of aluminium with Hydroxynaphthol Blue

The reaction of aluminium(III) with Hydroxynaphtol Blue (HNB) in aqueous media at apparent pH 5.5 results in a red complex that is stable for at least 4 hr. Beer's Law is obeyed up to 1.6 microg/ml of aluminium(III) with an apparent molar absorptivity of 1.66 x 10(4) l.mol(-1). cm(-1) at 569 nm. This paper proposes procedures for aluminium(III) determination by ordinary and first-derivative spectrophotometry. The results demonstrated that the linear dynamic range is 0.03-1.60 microg/ml for ordinary spectrophotometry and 11.8-320.0 ng/ml for first derivative spectrophotometry. The HNB is not selectivity for aluminium, but the addition of EDTA allows the aluminium determination in the presence of accepted amounts of Ca(II), Mg(II), Mn(II), Ba(II), Sr(II), Cd(II), Pb(II), La(III), In(III), Bi(III) and Zn(II). The interference of Cu(II) and Hg(II) can be masked by thiosulphate. Ions such as UO(2)(II), Mo(VI), Co(II), Ti(IV) and PO(4)(III) do interfere seriously. This method was applied for aluminium determination in copper-base alloy, zinc-base alloy, magnesium-base alloy, iron ore, manganese ore, cement, dolomite, feldspar and limestone. The results indicated high accuracy and precision.