Thermal and FTIR spectroscopic analysis of the interactions of aniline adsorbed on to MCM-41 mesoporous material

The adsorption of aniline on Na-AlMCM-41 synthesized by us has been characterized by infrared spectroscopy, temperature programmed desorption (TPD), and differential thermal analysis methods. Aniline would be mostly bound to the mesostructure through weak pi interactions. On the mesostructure containing adsorbed water, the co-adsorption of aniline could occur by weak hydrogen bonding through surface water molecules. For water, two possible modes of adsorption have been identified. Different associations between aniline and hydrated and nonhydrated mesostructures have been evaluated in order to favor the posterior in situ polymerization of adsorbed aniline.     

A kinetic approach to homogeneous Ziegler type polymerization. Steady state

In this paper we present a kinetic approach to the analysis of steady-state homogeneous Ziegler-Natta polymerization activity data. The influence of the number of monomeric species that are coordinated to the active site on the apparent rate law is discussed and the equations are fitted to the experimental results.     

IR and theoretical studies of monocarbonyl Ni complexes formed by adsorption of CO at low pressure on silica-supported Ni(II) ions

This work reports on the reactivity of coordination vacancies of Ni(II) ions grafted onto the tridentate silica support (Ni(II)(3c) ions) with respect to CO used as a probe molecule. The adsorption of CO at 77 K in the 0.3 to 3.5 Pa CO pressure range is studied by FTIR on two samples differing in the dispersion of nickel. Quantum chemical calculations by the DFT method are performed to investigate, using a cluster approach, the binding of Ni to silica and, after CO adsorption, the geometry of the resulting carbonyl Ni complexes. Silica is modeled by using clusters composed of three types of monodentate ligands, SiO(-), SiOSi and/or SiOH, found on the surface of silica. This work is devoted to the monocarbonyl complexes. Whatever the sample, only one type of monocarbonyl is formed from Ni(II)(3c) ions. It is shown that the charge of the silica cluster is the major parameter influencing the CO IR frequency whereas the nature and the size of the silica cluster do not affect the CO bond length, confirming that local electrostatic interactions predominate. Only the 1- charged silica cluster Si(5)O(3)(-), composed of SiO(-), 2SiOSi fragments, respectively, reproduces the Ni[bond]O distances derived from EXAFS for the Ni(II)(3c) grafted site and gives CO frequencies in good agreement with the experimental values. It is shown that CO is stabilized by a magnetic transition from the (3)Ni(2+) triplet to the (1)Ni(2+) singlet state occurring upon adsorption.     

Mechanistic study of thermal behavior and combustion performance of epoxy resins: I homopolymerized TGDDM

Tetraglycidyl 4,4′-diaminodiphenylmethane (TGDDM) undergoes homopolymerization on heating. Intramolecular reactions which compete with crosslinking favor the formation of cyclic structures with increasing thermal and fire resistance of the resin, whereas physical mechanical properties tend to decrease. The mechanism of thermal decomposition of TGDDM is studied by thermogravimetry, differential scanning calorimetry and thermal volatilization analysis with characterization of volatiles evolved and residue left. Thermal degradation of poly-(TGDDM) starts at 260°C with elimination of water from secondary alcoholic groups which is a typical pathway for epoxy resin degradation. Resulting unsaturations weaken bonds in the β-position and provoke the first chain breaking at allyl–amine and allyl–either bonds. With increasing temperature, saturated alkyl–ether bonds and alkyl carbon–carbon bonds are broken first, followed by the most stable alkyl–aryl bonds at T>365°C. The combustion performance of TGDDM is discussed on the basis of the thermal degradation behavior.     

Micellar catalysis of the reaction of 2,4-dinitrofluorobenzene with phenoxide and thiophenoxide ions

The reactions of 2,4-dinitrofluorobenzene with phenoxide and thiophenoxide ion in water are strongly catalyzed by micelles of cetyltrimethylammonium bromide (CTABr) by factors of 230 and 1100 respectively. Nonionic micelles of Brij weakly catalyze the reaction with thiophenoxide ion. Spectral measurements show that phenoxide, and especially thiophenoxide, ions interact strongly with micelles of CTABr which also markedly change the acid dissociation of phenol under given buffer conditions.     

Multiresidue determination of pesticides in drinking and related waters by gas chromatography/mass spectrometry after solid-phase extraction: interlaboratory study

As part of a project funded by the European Commission (EC) for the development and evaluation of multiresidue methods for analysis of drinking and related waters, 15 European laboratories evaluated a method using styrene-divinylbenzene co-polymer solid-phase extraction followed by gas chromatography/mass spectrometry. The main aim of the study was to evaluate whether the method meets the requirements of EC Directive 98/83 in terms of accuracy, precision, and detection limit for 22 pesticides according to the following requirements: limit of detection, < or = 0.025 microg/L; accuracy, expressed as recovery between 75 and 125%; and precision, expressed as repeatability relative standard deviation of the method of < 12.5% and as reproducibility relative standard deviation of the method of < 25%. Analyses for unknown concentrations were performed with fortified commercial bottled and tap waters. All laboratories were able to achieve detection limits of 0.01 microg/L for all pesticides except dimethoate and desisopropylatrazine (0.02 microg/L). The criteria for repeatability were met for all compounds except trifluralin, dimethoate, and lindane in bottled water and chlorpyrifos, dimethoate, and lindane in tap water. The criteria for reproducibility were met for all compounds except trifluralin, dimethoate, and lindane in bottled water and pendimethalin, chlorpyrifos, dimethoate, terbutryn, and lindane in tap water. In terms of accuracy, the method meets the requirements for all pesticides in both matrixes, except for lindane in bottled water and lindane and chlorpyrifos in tap water.     

Synthesis, crystal structure, spectroscopic and electrochemical characterization of the dinuclear complex {tetra-μ-[(±)-2-(p-methoxyphenoxy)-propionato-O,O′]bis(aqua)dicopper(II)}

Structural, electrochemical and spectroscopic data of a new dinuclear copper(II) complex with (±)-2-(p-methoxyphenoxy)propionic acid are reported. The complex {tetra-μ-[(±)-2-(p-methoxyphenoxy)propionato-O,O′]-bis(aqua)dicopper(II)} crystallizes in the monoclinic system, space group P2₁/n with a = 14.149(1) ?, b = 7.495(1) ?, c = 19.827(1) ?, β = 90.62(1) and Z = 4. X-ray diffraction data show that the two copper(II) ions are held together through four carboxylate bridges, coordinated as equatorial ligands in square pyramidal geometry. The coordination sphere around each copper ion is completed by two water molecules as axial ligands. Thermogravimetric data are consistent with such results. The ligand has an “L” type shape due to the angle formed by the β-carbon of the propionic chain and the linked p-methoxyphenoxy group. This conformation contributes to the occurrence of a peculiar structure of the complex. The complex retains its dinuclear nature when dissolved in acetonitrile, but it decomposes into the corresponding mononuclear species if dissolved in ethanol, according to the EPR measurements. Further, cyclic voltammograms of the complex in acetonitrile show that the dinuclear species maintains the same structure, in agreement with the EPR data in this solvent. The voltammogram shows two irreversible reduction waves at E _pc = −0.73 and −1.04 V vs. Ag/AgCl assigned to the Cu(II)/Cu(I) and Cu(I)/Cu° redox couples, respectively, and two successive oxidation waves at E _pa =− 0.01 and +1.41 V vs. Ag/AgCl, assigned to the Cu°/Cu(I) and Cu(I)/Cu(II) redox couples, respectively, in addition to the oxidation waves of the carboxylate ligand.     

Thermal decomposition of 4,4′-diaminodiphenylsulphone

The thermal decomposition of 4,4′-diaminodiphenylsulphone (DDS) was studied by thermogravimetry, differential scanning calorimetry and thermal volatilisation analysis. Solid residues, high-boiling and gaseous products of degradation were collected at each step of thermal decomposition and analysed by infrared spectroscopy and gas chromatography/mass spectrometry.

On programmed heating at normal pressure, DDS starts to evaporate at 250°C. Thermal decomposition, which probably proceeds through homolytic scission of the S-C bond is simultaneously observed. The resulting sulphonyl radicals provoke polymerisation and cross-linking of the solid residue which undergoes a limited degradation at 350°C with elimination of heteroatoms N and S as volatile moieties. Above 400°C, the residue undergoes a complex charring process leading to an aromatic char typical of carbonised aromatic polymers.     

Determination of manganese and zinc in powdered chocolate samples by slurry sampling using sequential multi-element flame atomic absorption spectrometry

In the present work, a slurry sampling flame atomic absorption spectrometric method to determine directly manganese and zinc in powdered chocolate samples is proposed. The optimization step was performed using univariate methodology involving the following factors: nature and concentration of the acid solution, sonication time, and particle size. The established conditions led to the use of a sample mass of 150 mg, 2.0 mol L^− 1 nitric acid solution, sonication time of 15 min, and a slurry volume of 50 mL. This method allows the determination of manganese and zinc with detection limit of 52 and 61 ng g^− 1, respectively, and a precision expressed as relative standard deviation (RSD) of 2.6% and 3.2% (both, n = 10) for contents of manganese and zinc of 52.4 and 100.0 μg g^− 1, respectively. The proposed method was applied for determination of manganese and zinc in five powdered chocolate samples. In these, the manganese content varied from 42.8 to 52.7 and from 88.6 to 102.4 μg g^− 1 of zinc. The analytical results were compared with the results obtained by analysis of these samples after digestion using open vessel and acid bomb digestion procedures and determination using FS-FAAS. The statistical comparison by t-test (95% confidence level) showed no significant difference between these results.     

Quantitative separation of zinc traces from cadmium matrices by solid-phase extraction with polyurethane foam

A system for separation of zinc traces from large amounts of cadmium is proposed in this paper. It is based on the solid-phase extraction of the zinc in the form of thiocyanate complexes by the polyurethane foam. The following parameters were studied: effect of pH and of the thiocyanate concentration on the zinc extraction, shaking time required for quantitative extraction, amount of PU foam necessary for complete extraction, conditions for the separation of zinc from cadmium, influence of other cations and anions on the zinc sorption by PU foam, and required conditions for back extraction of zinc from the PU foam. The results show that zinc traces can be separated from large amounts of cadmium at pH 3.0±0.50, with the range of thiocyanate concentration from 0.15 to 0.20 mol l⁻¹, and the shaking time of 5 min. The back extraction of zinc can be done by shaking it with water for 10 min. Calcium, barium, strontium, magnesium, aluminum, nickel and iron(II) are efficiently separated. Iron(III), copper(II) and cobalt(II) are extracted simultaneously with zinc, but the iron reduction with ascorbic acid and the use of citrate to mask copper(II) and cobalt(II) increase the selectivity of the zinc extraction. The anions nitrate, chloride, sulfate, acetate, thiosulphate, tartarate, oxalate, fluoride, citrate, and carbonate do not affect the zinc extraction. Phosphate and EDTA must be absent. The method proposed was applied to determine zinc in cadmium salts using 4-(2-pyridylazo)-resorcinol (PAR) as a spectrophotometric reagent. The result achieved did not show significant difference in the accuracy and precision (95% confidence level) with those obtained by ICP–AES analysis.