Sulfur containing polymers.: Aromatic polydithiocarbonates and polythiocarbonates: synthesis and thermal properties

New polydithiocarbonates and polythiocarbonates were obtained by interfacial polymerization of bis(4-mercaptophenyl)methane, bis(4-mercaptophenyl)ether and bis(4-mercaptophenyl)sulfide with phosgene, bisphenol A bischloroformate and bisphenol A polycarbonate oligomers (-OH/-O-CO-Cl terminated). Polymerization process was carried out under interfacial conditions using a phase-transfer catalyst, as earlier described for the synthesis of polydithiocarbonates and polythiocarbonates from 2,2-bis(4-mercaptophenyl)propane. The structures of the polymers were examined by IR and NMR spectroscopies; their thermal properties were investigated by thermogravimetric analysis and differential scanning calorimetry. In particular, the effect of the substitution of one or both the ethereal oxygen atoms of the carbonate group by sulfur has been analyzed by comparing the T_g values and the ability to crystallize of the sulfur containing polymers with those of the corresponding polycarbonates.     

Supramolecular chirality control by solvent changes. Solvodichroic effect on chiral porphyrin aggregation

The mode of aggregation of amphiphilised porphyrin derivatives bearing a chiral functionality is strongly affected by solvent composition; this results in the tuning of the supramolecular chirality of the porphyrin aggregates.     

Synthesis and spectroscopic and structural characterization of two novel photoactivatable Ca2+ compounds

Two novel photoactivatable Ca(2+) compounds were synthesized to achieve a fast concentration jump of calcium ions in solution; this is of paramount importance for investigating the physiological cellular response. The light-sensitive ligands 4-(2-nitrophenyl)-3,6-dioxaoctane dioic acid (H2L1) and 4-(4,5-dimethoxy-2-nitrophenyl)-3,6-dioxaoctane dioic acid (H2L2) were generated by multistep syntheses, and the corresponding calcium complexes, Ca1 and Ca2, were isolated and characterized. The solution equilibria of H2L1 and H2L2 with Ca2+ were investigated; for both ligands, the formation of a 1:2 Ca2+/ligand species is detected and the complete characterization is presented. The crystal structures of Ca1 and Ca2 were determined. In Ca1 the solid state assembly is attained by a polymeric association of [(CaL1(H2O))2(mu-OH2)] dimeric units. Each calcium ion coordinates four oxygen atoms of one ligand (two ethereal, one carboxylic, and one bridging carboxylic oxygen atom), one water molecule, one bridging water molecule, and a carboxylate group of the other ligand within the dimer. The octacoordination of the metal is completed by an interaction with the adjacent dimeric unit. The crystal structure of the complex Ca2 does not show a polymeric nature, but it is a centrosymmetric dimer. The coordination number of the metal ion is still 8:4 oxygen atoms of the ligand; 3 water molecules; 1 bridging carboxylate group. A preliminary study of the photochemical features of the complexes Ca1 and Ca2 is reported: photoexcitation by a nanosecond pulsed UV laser induces the cleavage of the ligand. This drastically reduces the affinity of the ligand toward Ca2+, which is then released in solution.     

Alkoxyamines of Stable Aromatic Nitroxides: N?O vs. C?O Bond Homolysis

A series of stable 2,2‐disubstituted 3‐(phenylimino)indol‐1‐oxyls, the alkoxyamines 3 , were prepared, characterized, and tested as possible candidates in controlled radical polymerization (CRP). The sturctures of 3d and 10 were additionally solved by X‐ray diffraction. The lability of the N? O(C) and (N)O? C bonds of compounds 3 were compared, and the possibility of N? O vs. O? C bond cleavage was evaluated by thermal degradation, ESR spin trapping, MS experiments, and DFT calculations. Alkoxyamines with a primary‐ or secondary‐alkyl group bound to the O‐atom of the nitroxide function (hexyl and i‐Pr) mainly underwent (undesired) N? O bond homolysis. When the O‐alkyl radical was a tertiary or a benzyl group (crotonyl or styryl), O? C bond cleavage occurred as the main process, thus suggesting a possible use of these compounds in CRP processes.     

SKIN OPTICS AND PHOTOTHERAPY OF JAUNDICE

Abstract The Kubelka–Munk theory of radiation transfer is applied to determine the influence of skin optical losses on the efficiency of phototherapy of jaundice. Using a multi-layer model of the skin the photon absorption rate of bilirubin molecules is calculated for spectrally Gaussian light sources and fluorescent lamps used in phototherapy. Light absorption and scattering processes in the skin layers shift the optimum value of the peak excitation wavelength from λ= 453 nm (absorption maximum of bilirubin in vitro ) to λ= 480 nm. This suggests the clinical investigation of narrow-spectrum lamps emitting in the blue-green region of the spectrum.     

Analysis of metal alloys by second-harmonic phase-selective a.c. voltammetry

Second-harmonic phase-selective a.c. voltammetry and second-harmonic a.c. anodic stripping voltammetry are shown to be particularly suitable for simultaneous determinations of elements having very close half-wave potentials (differences of <50 mV). The technique are applied to real matrices. Samples of standard materials BCS 207/2 Gunmetal, SRM 631 SPectrographic Zinc Spelter and SRM 899 (Nickel-base High-temperature Alloy) were digested with a sulphuric acid/nitric acid mixture; after dissolution, the samples were taken up in hydrochloric acid. After adjustment to 1 mol l^?1 HCl, the solutions were used directly for voltammetric measurements of Pb(II)/Sn (II), Sb(III)/Bi(III), Pb(II)/Tl(I) and In(III)/Cd(II) as appropriate. The confidence intervals of the experimental data were in agreement with the certified values for each element. Both the accuracy, expressed as percentage error, and precision, expressed as relative standard deviation, were better than 5%. The standard addition technique was found to improve the resolution of the a.c. voltammetric peaks even in the case of severe overlapping.     

Acid catalyzed rearrangements in the arylimino indoline series. Part IV . Reactions of 1,2-dihydro-2-phenyl-2-(indol-3-yl-derivatives)-3-phenylimino-3H-indole with trichloroacetic and hydrochloric acids. Crystal structure of 1,2-dihydro-2-phenyl-2-(indol-3-yl)-3-phenylimino-3H-indole

2-Phenyl-3-phenylimino-3H-indole reacts with indole, 2-methylindole and 1,2-dimethylindole in the presence of stoichiometric trichloroacetic acid to form 1,2-dihydro-2-phenyl-2-(indol-3-yl-derivatives)-3-phenylimino-3H-indole, which during a longer period of time (16 hours) undergoes indolyl transposition to carbon-3 and elimination of aniline affording the 3,3′-bis-indolyls. In the case of 1,2-dimethylindole the intermediate coming from the indolyl migration may undergo a nucleophilic addition to carbon-2 of another molecule of indole; the new intermediate leads to the formation of 2-phenyl-3,3′-di-(1,2-dimethylindol-3-yl)-3H-indole by elimination of aniline and migration to carbon-3 of the second molecule of indole. By treatment with hydrochloric acid in refluxing ethanol, 1,2-dihydro-2-phenyl-2-(indol-3-yl-derivatives)-3-phenylimino-3H-indole afford to 3,3′-bis-indolyls and 1,2-dihydro-2-phenyl-2-(indol-3-yl-derivatives)-3H-indol-3-one (indoxyls). The crystal structure of 1,2-dihydro-2-phenyl-2-(indol-3-yl)-3-phenylimino-3H-indole is also reported. The latter compound does not give rearrangement products by acid treatment, only untreatable tarry material.     

Synthesis and X-ray structures of dinitrato-bis[2-(2′-thienyl)-1-(2′-thienylmethyl)benzimidazole]copper(II) and dichloro-bis-[2-(2′-thienyl)-benzimidazole]copper(II)-ethanol

Summary The reactions of Cu(NO₃)₂ · 3 H₂O with 2- (2-thienyl)-1-(2-thienylmethyl)benzimidazole (L) and of CuCl₂ · 2H₂O with 2-(2-thienyl)benzimidazole (L) have been carried out. The crystal structure of two isolated complexes,(1) and(2), have been determined by single-crystal x-ray diffraction methods. Crystals of(1) are monoclinic, space groupP2₁ /c, witha=9.884(4),b=9.892(4),c=18.732(8) Å, =114.89(2)°,Z=2;R=0.068 for 1909 observed reflections. Crystals of (2) are orthorhombic, space groupPbcn, witha=14.835(1),b=8.193(1),c=20.493(1) Å,Z=4;R=0.086 for 415 observed reflections. In the complex (1) the copper co-ordination is tetragonal (compressed octahedral) and involves a nitrogen atom of the organic ligand [Cu-N 1.970(6) Å] and two oxygen atoms of the nitrate group [Cu-O 2.318(7) and 2.246(9) Å] which appears to coordinate nearly symmetrically to the metal; however it has unusually large thermal motion which suggests a fluxional behaviour. In the complex (2) the co-ordination is square planar and involves an imidazole nitrogen [Cu-N 1.95(3) Å] and a chlorine atom [Cu-Cl 2.27(1) Å]. A long interaction Cu-S=3.37(2) Å completes the co-ordination polyhedron to a very elongated distorted tetragonal bipyramid. In both compounds a thiophene ring is disordered.     

Crystal structure of inclusion compounds: The complexes of thecis-syn-cis and thecis-anti-cis isomers of dicyclohexano-18-crown-6 with 4-methylbenzenesulfamide

The crystal structure of two complexes of the isomerscis-syn-cis (isomer A) andcis-anti-cis (isomer B) of dicyclohexano-18-crown-6 with 4-methylbenzenesulfamide have been determined by X-ray single crystal diffraction methods. The two structures have been solved by direct methods and refined to agreement values of 0.067 and 0.038 for isomers A and B respectively. The first isomer forms an inclusion compound with a host/guest ratio of 1 : I; the second one of I:2. The amino groups of the guest molecules are connected by N-H...O hydrogen bonds with oxygen atoms of the polyether molecules. The methyl groups of 4-methylbenzenesulfamide do not form hydrogen bonds.[/p]The host-guest interactions in the molecular complexes, the reciprocal influence of the two molecules on their conformation and the intermolecular contacts between the molecules in the crystal are discussed.