Zirconium silicate assisted removal of residual proteins after organic solvent deproteinization of human plasma,enhancing the stability of the LC–ESI-MS response for the bioanalysis of small molecules

An efficient blood plasma clean-up method was developed, where methanol protein precipitation was applied, followed by zirconium silicate assisted exclusion of residual proteins. A strong binding of zirconium (IV) silicate to the proteins enabled the elimination of remaining proteins after solvent deproteinization through a rapid solid-phase extraction (SPE) procedure. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI/TOF MS) was used for monitoring the proteins during clean-up practice applied to human plasma samples. The proteins were quantified by colorimetric detection using the bicinchoninic acid (BCA) assay. The presented analytical strategy resulted in the depletion of >99.6% proteins from human plasma samples. Furthermore, high-performance liquid chromatography hyphenated to diode-array and electrospray ionization mass spectrometric detection (HPLC–DAD/ESI MS) was applied for qualitative and quantitative analysis of the caffeoylquinic acids (CQAs) and their metabolites in human plasma. The procedure demonstrated high recoveries for the standard compounds spiked at different concentrations. Cynarin and chlorogenic acid were recovered in the range of 81–86% and 78–83%, respectively. Caffeic acid was extracted in the excess of 89–92%, while ferulic acid and dihydroxyhydrocinnamic acid showed a recovery of 87–91% and 92–95%, respectively. The method was partially validated in accordance with FDA-Industry Guidelines for Bioanalytical Method Validation (2001). The presented scheme improves the clean-up efficacy of the methanol deproteinization, significantly reduces the matrix effects and provides a great analytical tool for the isolation of small molecules from human plasma.     

Photocatalytically-assisted electrochemical degradation of <Emphasis Type="Italic">p</Emphasis>-aminophenol in aqueous solutions using zeolite-supported TiO<Subscript>2</Subscript> catalyst

This paper reports the results of an investigation into enhancement of the electrochemical oxidation of p-aminophenol (4-AP) in an aqueous solution with a boron-doped diamond (BDD) electrode, assisted by photocatalysis using a zeolite-supported TiO₂ (Z-TiO₂) catalyst. The BDD electrode was characterised in 0.1 M Na₂SO₄-supporting electrolyte and the presence of 4-AP by open-circuit potential behaviour (OCP) and cyclic voltammetry (CV). The electrode behaviour was investigated in the dark and following UV irradiation and in the absence/presence of the Z-TiO₂ catalyst. The electro-oxidation process was carried out using chronoamperometry (CA) and multiple-pulsed amperometry (MPA) at the selected potential under potentiostatic conditions. The electrochemical degradation process of 4-AP on the BDD electrode was improved by the application of a pulsed potential, which allowed both in-situ electrochemical cleaning of the electrode and indirect oxidation of 4-AP by oxygen evolution. The application of photocatalysis using Z-TiO₂ in the 4-AP electrochemical degradation exhibited an enhanced effect when the anodic potential was set at +1.25 V vs. Ag/AgCl in the water stability region, close to the oxygen evolution potential.     

Monitoring the aggregation of single casein micelles using fluorescence microscopy

The aggregation of casein micelles (CMs) induced by milk-clotting enzymes is a process of fundamental importance in the dairy industry for cheese production; however, it is not well characterized on the nanoscale. Here we enabled the monitoring of the kinetics of aggregation between single CMs (30-600 nm in diameter) by immobilizing them on a glass substrate at low densities and subsequently imaging them with fluorescence microscopy. We validated the new method by a quantitative comparison to ensemble measurements of aggregation. Single-particle statistics allowed us to observe for the first time several heterogeneities in CM aggregation. We observed two types of CM growth: a slow increase in the size of CMs and a stepwise increase attributed to interactions between aggregates preformed in solution. Both types of growth exhibit a lag phase that was very heterogeneous between different CMs, suggesting significant differences in their composition or structure. Detailed size histograms of CMs during aggregation also revealed the presence of two distinct subpopulations with different growth amplitudes and kinetics. The dependence of these distinct nanoscale processes/parameters on aggregation conditions is not accessible to bulk measurements that report only ensemble-average values and may prove important to an in-depth understanding of CM aggregation.     

Performance of biodegradable microcapsules of poly(butylene succinate), poly(butylene succinate-co-adipate) and poly(butylene terephthalate-co-adipate) as drug encapsulation systems

Poly(butylene succinate) (PBSu), poly(butylene succinate-co-adipate) (PBSA) and poly(butylene terephthalate-co-adipate) (PBTA) microcapsules were prepared by the double emulsion/solvent evaporation method. The effect of polymer and poly(vinyl alcohol) (PVA) concentration on the microcapsule morphologies, drug encapsulation efficiency (EE) and drug loading (DL) of bovine serum albumin (BSA) and all-trans retinoic acid (atRA) were all investigated. As a result, the sizes of PBSu, PBSA and PBTA microcapsules were increased significantly by varying polymer concentrations from 6 to 9%. atRA was encapsulated into the microcapsules with an high level of approximately 95% EE. The highest EE and DL of BSA were observed at 1% polymer concentration in values of 60 and 37%, respectively. 4% PVA was found as the optimum concentration and resulted in 75% EE and 14% DL of BSA. The BSA release from the capsules of PBSA was the longest, with 10% release in the first day and a steady release of 17% until the end of day 28. The release of atRA from PBSu microcapsules showed a zero-order profile for 2 weeks, keeping a steady release rate during 4 weeks with a 9% cumulative release. Similarly, the PBSA microcapsules showed a prolonged and a steady release of atRA during 6 weeks with 12% release. In the case of PBTA microcapsules, after a burst release of 10% in the first day, showed a parabolic release profile of atRA during 42 days, releasing 36% of atRA.     

Dendritic oligothiophenes terminated with tris(alkyloxy)phenylethynyl tails: synthesis, physical properties, and self-assembly

Three-dimensional (3D) π-conjugated dendritic oligothiophenes up to a third generation have been functionalized with tris(decyloxy)phenylethynyl tails at the periphery. The first-generation compounds (3 T-p-Ph-C10 and 6 T-p-Ph-C10) were synthesized by palladium-catalyzed Sonogashira coupling reactions, whereas the higher generation products were synthesized by palladium-catalyzed Suzuki coupling reactions in a divergent approach. The optical and electrochemical properties were investigated by UV/Vis absorption, fluorescence spectroscopy, and cyclic voltammetry. The results revealed that the terminal tris(alkyloxy)phenylethynyl groups are conjugated to the branched oligothiophene core, yielding redshifted absorption and fluorescence spectra and reduced optical band gaps relative to the dendritic oligothiophene core. A structural study revealed a close relationship between the type of supramolecular organization and the size of the oligothiophene core. The first-generation compounds 3 T-p-Ph-C10 and 6 T-p-Ph-C10 displayed columnar phases in the bulk state, which was confirmed by two-dimensional wide-angle X-ray scattering (2D WAXS) measurements. The self-assembly into columnar stacks has mainly been attributed to phase separation between the rigid thiophene cores and the flexible side-chains assisted by minor π-stacking interactions between the conjugated dendritic oligothiophene units. The high-generation compounds, however, showed less ordered structures in the solid state.     

Biocompatible functionalization of polymersome surfaces: a new approach to surface immobilization and cell targeting using polymersomes

Vesicles assembled from amphiphilic block copolymers represent promising nanomaterials for applications that include drug delivery and surface functionalization. One essential requirement to guide such polymersomes to a desired site in vivo is conjugation of active, targeting ligands to the surface of preformed self-assemblies. Such conjugation chemistry must fulfill criteria of efficiency and selectivity, stability of the resulting bond, and biocompatibility. We have here developed a new system that achieves these criteria by simple conjugation of 4-formylbenzoate (4FB) functionalized polymersomes with 6-hydrazinonicotinate acetone hydrazone (HyNic) functionalized antibodies in aqueous buffer. The number of available amino groups on the surface of polymersomes composed of poly(dimethylsiloxane)-block-poly(2-methyloxazoline) diblock copolymers was investigated by reacting hydrophilic succinimidyl-activated fluorescent dye with polymersomes and evaluating the resulting emission intensity. To prove attachment of biomolecules to polymersomes, HyNic functionalized enhanced yellow fluorescent protein (eYFP) was attached to 4FB functionalized polymersomes, resulting in an average number of 5 eYFP molecules per polymersome. Two different polymersome-antibody conjugates were produced using either antibiotin IgG or trastuzumab. They showed specific targeting toward biotin-patterned surfaces and breast cancer cells. Overall, the polymersome-ligand platform appears promising for therapeutic and diagnostic use.     

Magnetic properties of a manganese(III) Chain with monoatomic bridges: catena-MnF(salen)

In the solid state, MnF(salen) forms chains wherein fairly linear fluoride bridges between high-spin Mn(III) centers are observed. We interpret the magnetic properties of these chains by use of the classical Fisher model and by use of the high-temperature expansion approach, as well as by exact matrix diagonalization of the spin Hamiltonian, of model rings. In solution, electron paramagnetic resonance shows the chains to be symmetrically cleaved to monomeric MnF(salen).     

Local orbitals by minimizing powers of the orbital variance

It is demonstrated that a set of local orthonormal Hartree-Fock (HF) molecular orbitals can be obtained for both the occupied and virtual orbital spaces by minimizing powers of the orbital variance using the trust-region algorithm. For a power exponent equal to one, the Boys localization function is obtained. For increasing power exponents, the penalty for delocalized orbitals is increased and smaller maximum orbital spreads are encountered. Calculations on superbenzene, C(60), and a fragment of the titin protein show that for a power exponent equal to one, delocalized outlier orbitals may be encountered. These disappear when the exponent is larger than one. For a small penalty, the occupied orbitals are more local than the virtual ones. When the penalty is increased, the locality of the occupied and virtual orbitals becomes similar. In fact, when increasing the cardinal number for Dunning's correlation consistent basis sets, it is seen that for larger penalties, the virtual orbitals become more local than the occupied ones. We also show that the local virtual HF orbitals are significantly more local than the redundant projected atomic orbitals, which often have been used to span the virtual orbital space in local correlated wave function calculations. Our local molecular orbitals thus appear to be a good candidate for local correlation methods.     

Damped response theory description of two-photon absorption

Damped response theory is applied to the calculation of two-photon absorption (TPA) spectra, which are determined directly, at each frequency, from a modified damped cubic response function. The TPA spectrum may therefore be evaluated for selected frequency ranges, making the damped TPA approach attractive for calculations on large molecules with a high density of states, where the calculation of TPA using standard theory is more problematic. Damped response theory can also be applied to the case of intermediate state resonances, where the standard TPA expression is divergent. Both exact damped response theory and its application within density functional theory are discussed. The latter is implemented using an atomic-orbital based density matrix formulation, which makes the approach especially suitable for studies on large systems. A test preliminary study is presented for the TPA spectrum of R-(+)-1,1'-bi(2-naphtol).