Morphology development during solid-state annealing of poly(ether-ester) multiblock copolymers

Morphology development during isothermal annealing of poly(ether-ester) multiblock copolymers with hard segments containing poly(tetramethylene isophthalate) is examined by differential scanning calorimetry (DSC) and small-angle x-ray scattering (SAXS). Reorganization in the solid-state occurs by melting and recrystallization. At temperatures close to the melting point, glass transition measurements after quenching from the annealing temperature suggest microphase mixing follows melting. The temperature of maximum recrystallization rate is elevated relative to that of isothermal crystallization. SAXS experiments suggest that a memory of the initial morphology is retained during annealing. Aspects of the DSC scans related to crystallization on cooling and rescanning also suggest that the morphology at the annealing temperature plays a governing role in the determination of the degree of order possible on cooling. The crystalline regions stable at the annealing temperature are envisioned to function in a dual role, acting as nucleation centers for recrystallization and as a form of “constraint” to ordering on cooling. © 1996 John Wiley & Sons, Inc.     

Determining elemental strontium distribution in rat bones treated with strontium ranelate and strontium citrate using 2D micro-XRF and 3D dual energy K-edge subtraction synchrotron imaging

Strontium-based medications, such as strontium ranelate, have been suggested to have therapeutic effects in patients with osteoporosis. Strontium salts available off-shelf in stores across North America are assumed to provide similar effects as strontium ranelate and thus should lead to similar distributions of elemental strontium incorporated in bone. The objective of this study was to compare the spatial distribution of strontium in animal bones following the administration of strontium ranelate and strontium citrate. Seventeen-week-old Sprague–Dawley rats were split into three groups over 10 weeks and given 625 mg/kg/day of strontium ranelate and 676 mg/kg/day of strontium citrate; the control group received no additional supplementary strontium. The humeri were collected from all animals, and strontium distribution was mapped using 2D micro-XRF and 3D dual energy K-edge subtraction (KES) imaging. 2D and 3D elemental mapping methods demonstrated that strontium delivered during treatment by both salts had the same spatial distribution. 3D elemental strontium maps of treated animal bones showed that strontium was largely observed in the trabecular regions under the epiphyseal (growth) plate. The thickness of the strontium layers in both the strontium ranelate and strontium citrate sample was not significantly different (p = .9201). 2D micro-XRF and 3D dual-energy KES images effectively elucidated the spatial distribution of elemental strontium in calcified tissue. These methods provide a novel approach to evaluating the potential efficacy of strontium supplements in the treatment of osteoporosis.     

All-fused-silica miniature optical fiber tip pressure sensor

An all-fused-silica pressure sensor fabricated directly onto a fiber tip of 125 microm diameter is described. Simple fabrication steps include only cleaving and fusion splicing. Because no chemical processes are involved, the fabrication is easy, safe, and cost effective. Issues in sensor design and loss analysis are discussed. The sensor has been tested for static pressure response, showing a sensitivity of 2.2 nm/psi, a resolution of 0.01 psi (68.9 Pa), a hysteresis of 0.025%, and capability of operation at temperatures up to 600 deegrees C. This miniature sensor may be suitable for medical diagnostics, environmental monitoring, and other industrial applications.     

Density waves and supersolidity in rapidly rotating atomic Fermi gases

We study theoretically the low-temperature phases of a two-component atomic Fermi gas with attractive s-wave interactions under conditions of rapid rotation. We find that, in the extreme quantum limit, when all particles occupy the lowest Landau level, the normal state is unstable to the formation of charge density wave (CDW) order. At lower rotation rates, when many Landau levels are occupied, we show that the low-temperature phases can be supersolids, involving both CDW and superconducting order.     

Comparison of laser-induced and planar laser-induced fluorescence measurements of nitric oxide in a high-pressure, swirl-stabilized, spray flame

We report spatially resolved linear laser-induced fluorescence (LIF) and planar laser-induced fluorescence (PLIF) measurements of nitric oxide (NO) in a pre-heated, high-pressure (4.27 atm), lean direct-injection (LDI) spray flame. The feasibility of using PLIF in lieu of LIF is assessed with respect to measuring NO concentrations in high-pressure LDI spray flames. NO is excited via the resonant Q₂(26.5) transition of the γ(0,0) band while a non-resonant wavelength is employed to subtract background interferences. LIF detection is performed in a 2-nm region centered on the γ(0,1) band. PLIF detection is performed in a 68-nm window that captures fluorescence from several vibrational bands. An in situ NO doping scheme for fluorescence calibration is successfully employed to quantify the LIF signals. However, a similar calibration scheme for the reduction of PLIF images to quantitative field measurements is plagued by the laser-excited background. Excitation scans and calibration comparisons have been performed to assess the background contribution for PLIF detection. Quantitative radial NO profiles measured by LIF are presented and analyzed so as to correct the PLIF measurements to within the accuracy bars of the LIF measurements via a single-point scaling of the PLIF image. Received: 23 November 1999 / Revised version: 17 January 2000 / Published online: 27 April 2000     

Thermopower of concentrated AuCr alloys

Measurements are presented of the thermopower of three concentrated $\text{Au}$Cr (0.9, 4.9 and 10.6 at.%Cr) alloys between 4 and 500°K. Considerable differences are observed in the thermopower compared with $\text{Au}$Fe alloys in a similar concentration range. Possible reasons for these differences are discussed in terms of current ideas on spin glasses and the pair model of Matho and Béal-Monod.     

Non-Uniformity and Generalised Sacks Splitting

We show that there do not exist computable functions f ₁(e, i), f ₂(e, i), g ₁(e, i), g ₂(e, i) such that for all e, i ∈ ω, (1) $ {\left( {W_{{f_{1} {\left( {e,i} \right)}}} - W_{{f_{2} {\left( {e,i} \right)}}} } \right)} \leqslant _{{\rm T}} {\left( {W_{e} - W_{i} } \right)}; $ (2) $ {\left( {W_{{g_{1} {\left( {e,i} \right)}}} - W_{{g_{2} {\left( {e,i} \right)}}} } \right)} \leqslant _{{\rm T}} {\left( {W_{e} - W_{i} } \right)}; $ (3) $ {\left( {W_{e} - W_{i} } \right)} \not\leqslant _{{\rm T}} {\left( {W_{{f_{1} {\left( {e,i} \right)}}} - W_{{f_{2} {\left( {e,i} \right)}}} } \right)} \oplus {\left( {W_{{g_{1} {\left( {e,i} \right)}}} - W_{{g_{2} {\left( {e,i} \right)}}} } \right)}; $ (4) $ {\left( {W_{e} - W_{i} } \right)} \not\leqslant _{{\rm T}} {\left( {W_{{f_{1} {\left( {e,i} \right)}}} - W_{{f_{2} {\left( {e,i} \right)}}} } \right)}{\text{unless}}{\left( {W_{e} - W_{i} } \right)} \leqslant _{{\rm T}} {\emptyset};{\text{and}} $ (5) $ {\left( {W_{e} - W_{i} } \right)} \leqslant _{{\rm T}} {\left( {W_{{g_{1} {\left( {e,i} \right)}}} - W_{{g_{2} {\left( {e,i} \right)}}} } \right)}{\text{unless}}{\left( {W_{e} - W_{i} } \right)} \leqslant _{{\rm T}} {\emptyset}. $ It follows that the splitting theorems of Sacks and Cooper cannot be combined uniformly.