Detection of cocaine in the airborne particles of the Italian cities Rome and Taranto

Cocaine was first detected in the air of two Italian cities, Rome and Taranto, where it reached concentrations sometimes exceeding 100 pg/m(3), by HRGC-MS analysis of carbonaceous aerosol samples. By contrast, the drug was virtually absent in Algiers (Algeria). In Italy, atmospheric concentrations of cocaine were, on average, similar to those of other toxic pollutants like polychlorobiphenyls or nitrated polynuclear aromatic hydrocarbons, and higher than those of polychlorodibenzo-p-dioxins/polychlorodibenzofurans. The cocaine concentrations seemed to correlate with regional consumption of the drug in Rome and Taranto. By contrast, it correlated neither with nicotine or caffeine, nor with benzo[a]pyrene, the sole organic compound associated with aerosols that is quoted according to Italian legislation.     

Validation of liquid chromatography and liquid chromatography/tandem mass spectrometry methods for the determination of etoricoxib in pharmaceutical formulations

Reversed-phase liquid chromatography (LC) and LC/tandem mass spectrometry (LC/MS/MS) methods were developed and validated for the determination of etoricoxib in pharmaceutical dosage forms. The LC method was performed by reversed-phase chromatography on a Synergi fusion C18 column (150 x 4.6 mm id) maintained at ambient temperature. The mobile phase consisted of 0.01 M phosphoric acid, pH 3.0-acetonitrile (62 + 38, v/v) at a flow rate of 1.0 mL/min, and photodiode array detection at 234 nm was used. The chromatographic separation was obtained within 7.0 min, and calibration curves were linear in the concentration range of 0.02-150 microg/mL. The LC/MS/MS method was performed on a Luna C18 column (50 x 3.0 mm id). The mobile phase consisted of acetonitrile-water (95 + 5)-0.1% acetic acid (90 + 10, v/v). Detection was performed by positive electrospray ionization in the multiple reaction monitoring mode, monitoring the transitions 359.3 > 280.0 and 332.0 > 95.0 for etoricoxib and piroxicam (internal standard), respectively. The chromatographic separation was obtained within 2.0 min, and calibration curves were linear in the concentration range of 1-5000 ng/mL. Validation parameters, such as specificity, linearity, precision, accuracy, and robustness, were evaluated, which gave results within the acceptable range for both methods. Moreover, the proposed methods were successfully applied for routine quality control analysis of pharmaceutical products and showed significant correlation (r = 0.9999) of the results.     

Molecular dynamics reveal that isoDGR-containing cyclopeptides are true αvβ3 antagonists unable to promote integrin allostery and activation

Ain't got that swing(-out): The cyclopeptide isoDGR is emerging as a new αvβ3 integrin binding motif. Agreement between the results of computational and biochemical studies reveals that isoDGR-containing cyclopeptides are true αvβ3 integrin antagonists that block αvβ3 in its inactive conformation (see scheme). isoDGR-based ligands may give αvβ3 antagonists without paradoxical effects.     

Continuous split-flow thin cell and gravitational field-flow fractionation of wheat starch particles

The combined employment of the SPLITT (split-flow thin) cell--a relatively new system for fast, continuous binary separation--and of gravitational field-flow fractionation (GrFFF)--a fractionation technique suitable for micron particle size distribution determination--was investigated for starch separation and characterization. Emphasis is placed on the main advantages of both techniques: operating under gentle earth gravity field, low cost and ease of maintenance. The reproducibility of GrFFF is demonstrated. Both the SPLITT separation and GrFFF fractionation results were checked by optical microscopy. Application examples of typical starch fractionation experiments are reported and discussed.     

Proton‐conducting electrolytes based on silylated and sulfonated polyetheretherketone: Synthesis and characterization

A derivative of polyetheretherketone (PEEK) having sulfonic acid groups and silicon‐containing substituents covalently bound to the aromatic backbone has been prepared as proton‐exchange membrane material. The polymer 4 (PhSiSPEEK) has been synthesized via (i) sulfonation of PEEK up to 0.9 degree of sulfonation (DS, the number of sulfonic groups per repeat unit), (ii) conversion of sulfonated PEEK 1 (SPEEK09) into sulfonyl chlorinated derivative 2 (PEEKSO₂Cl), (iii) lithiation of 2 and subsequent addition of PhSiCl₃, followed by hydrolysis. The chemical structure of the synthesized polymers has been investigated by ¹H NMR and ¹³C NMR and ATR/FTIR spectroscopy and their thermal stability has been evaluated by thermogravimetric analysis. The presence of inorganic moieties increases the thermal stability of 4 with respect to the sulfonated and not silylated product. Despite its very high DS, PhSiSPEEK is insoluble in water but does not possess the plastic properties needed to be used as an electrolyte membrane. Blend membranes made of SPEEK05 (DS = 0.5) and containing 10 and 25 wt % of 4 (DS = 0.9, degree of silylation DSi = 0.1) have been prepared and characterized by water uptake measurements and electrochemical impedance spectroscopy. The combination of the two functionalized polymers having different properties allows to obtain proton‐conducting electrolytes that are potential candidates for fuel cells applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2178–2186, 2010     

The effect of ring nitrogen atoms on the homolytic reactivity of phenolic compounds: understanding the radical-scavenging ability of 5-pyrimidinols

Six substituted 5-pyrimidinols were synthesized, and the thermochemistry and kinetics of their reactions with free radicals were studied and compared to those of equivalently substituted phenols. To assess their potential as hydrogen-atom donors to free radicals, we measured their O-H bond dissociation enthalpies (BDEs) using the radical equilibration electron paramagnetic resonance technique. This revealed that the O-H BDEs in 5-pyrimidinols are, on average, about 2.5 kcal mol(-1) higher than those in equivalently substituted phenols. The results are in good agreement with theoretical predictions, and confirm that substituent effects on the O-H BDE of 5-pyrimidinol are essentially the same as those on the Obond;H BDE in phenol. The kinetics of the reactions of these compounds with peroxyl radicals has been studied by their inhibition of the AIBN-initiated autoxidation of styrene, and with alkyl and alkoxyl radicals by competition kinetics. Despite their larger O-H BDEs, 5-pyrimidinols appear to transfer their phenolic hydrogen-atom to peroxyl radicals as quickly as equivalently substituted phenols, while their reactivity toward alkyl radicals far exceeds that of the corresponding phenols. We suggest that this rate enhancement, which is large in the case of alkyl radical reactions, small in the case of peroxyl radical reactions, and nonexistent in the case of alkoxyl radical reactions, is due to polar effects in the transition states of these atom-transfer reactions. This hypothesis is supported by additional experimental and theoretical results. Despite this higher reactivity of 5-pyrimidinols towards radicals compared to phenols, electrochemical measurements indicate that they are more stable to one-electron oxidation than equivalently substituted phenols. For example, the 5-pyrimidinol analogues of 2,4,6-trimethylphenol and butylated hydroxytoluene (BHT) were found to have oxidation potentials approximately 400 mV higher than their phenolic counterparts, but reacted roughly one order of magnitude faster with alkyl radicals and at about the same rate with peroxyl radicals. The 5-pyrimidinol structure should, therefore, serve as a useful template for the rational design of novel air-stable radical scavengers and chain-breaking antioxidants that are more effective than phenols.     

SPLITT Cell Analytical Separation of Silica Particles. Non-Specific Crossover Effects: Does the Shear-Induced Diffusion Play a Role?

The gravitational split-flow lateral transport thin fractionation is known to be a fast, simple, theoretically tractable and tunable tool for the binary separation of molecular or particulate samples into different dimensional fractions. This fractionation is performed in a so-called SPLITT cell and is due to the combined effect of the gravitational force field and the flow rates inside the separation channel. It is known that separation performance is strongly dependent on the flow rate conditions and feed flow concentration, however, to date, few studies have been conducted to investigate the effect non-specific crossover has on separation. The aim of this work is to establish whether diffusive processes stemming from hydrodynamic effects contribute in any way to the quality of separation. A silica sample of known granule size distribution was chosen for this study which has environmental applications.     

Metal content in river suspended particulate matter: data on Po River

The present study summarizes the last ten years of literature on heavy metal distribution in Suspended Particulate Matter (SPM) and dissolved phase in the Po River (Italy). The work compares different methodologies employed to collect, concentrate and fractionate the samples. The importance of metal speciation as a function of particle size is underlined and two approaches to metal speciation in the colloidal fraction of Po River SPM are presented: Sedimentation Field-Flow Fractionation (SdFFF) and pH-dependent extractions. Finally, emphasis is placed on the need for comparison with a reference "natural background level" of the metal load in Po River particulate matter in order to determine the real human contribution to river pollution. The high values of some trace transition elements, such as Cr and Ni, have been compared with clay sediments around Ferrara and with bricks in historic buildings. The highly comparable natural concentration of these metals in Po fine sedimentary rocks and in historic brick buildings of Ferrara (XII-XVI centuries) can provide information on natural geochemical anomalies.     

Stereoselective synthesis and functionalization of 4-heterosubstituted β-lactams

Polyfunctionalized β-lactams were prepared with high stereoselectivity in an efficient manner. A palladium-catalyzed [2+2] carbonylative cycloaddition of allyl bromide with heteroaryliden-anilines afforded 2-azetidinones N-phenyl substituted, with an heteroaryl moiety linked at the C-4 carbon, and an alkenyl group at the C-3 carbon. The C-3 and the C-4 positions could be further functionalized inserting alkyl and hydroxyl groups in the azetidinone ring, through the generation of a stable azetidinyl anion then captured by various electrophiles.     

Biodegradable materials — Present situation and future perspectives

Biodegradable polymers constitute a loosely defined family of polymers that are designed to degrade through the action of living organisms. They offer a possible alternative to traditional nonbiodegradable polymers if recycling is impractical or not economical. The main driving force behind this technology is the solid waste problem, particularly with regard to the decreasing availability of landfills, the litter problem and the pollution of marine environment by non-biodegradable plastics. Technologies like composting used for the disposal of food and yard waste are the most suitable for the disposal of biodegradable materials. European Standardisation Committee (CEN), Organic Reclamation and Composting Association (ORCA) and German Institute for Standardisation (DIN) have already defined, at a draft level, the basic requirements for a product to be declared compostable. They are based on: complete biodegradability of the product in a time period compatible with composting, measured through respirometric tests (ASTM D5338-9, ISO/CD14855, etc); disintegration of the material during the fermentation phase; no negative effects on compost quality; checking of laboratory-scale results on pilot/full-scale composting plants. These requirements set forth a common base for a universal marking system to readily identify products to be composted. Thermoplastic starch-based polymers and aliphatic polyesters are the two classes of biodegradable materials with the greatest near-term potential. This paper reviews a great variety of properties, structures and biodegradation behaviour of thermoplastic starch in combination with poly(vinyl alcohol) or some aliphatic polyesters like poly(hydroxybutyrate-co-hydroxyvalerate), poly(lactic acid), poly(ϵ-caprolactone) and poly(butanediyl succinate).