Pharmacokinetic study of dendrobine in rat plasma by ultra‐performance liquid chromatography tandem mass spectrometry

Dendrobine, considered as the major active alkaloid compound, has been used for the quality control and discrimination of Dendrobium which is documented in the Chinese Pharmacopoeia. In this work, a sensitive and simple ultra‐performance liquid chromatography tandem mass spectrometry (UPLC‐MS/MS) method for determination of dendrobine in rat plasma is developed. After addition of caulophyline as an internal standard (IS), protein precipitation by acetonitrile–methanol (9:1, v/v) was used to prepare samples. Chromatographic separation was achieved on a UPLC BEH C₁₈ (2.1 ×100 mm, 1.7 µm) column with acetonitrile and 0.1% formic acid as the mobile phase with gradient elution. An electrospray ionization source was applied and operated in positive ion mode; multiple reaction monitoring mode was used for quantification using target fragment ions m/z 264.2 → 70.0 for dendrobine and m/z 205.1 → 58.0 for IS. Calibration plots were linear throughout the range 2–1000 ng/mL for dendrobine in rat plasma. The RSDs of intra‐day and inter‐day precision were both <13%. The accuracy of the method was between 95.4 and 103.9%. The method was successfully applied to pharmacokinetic study of dendrobine after intravenous administration. Copyright © 2015 John Wiley & Sons, Ltd.     

Design and synthesis of 9,9‐dioctyl‐9H‐fluorene based electrochromic polymers

Two novel heterocycle‐fluorene‐heterocycle monomers, 2,2′‐(9,9‐dioctyl‐9H‐fluorene‐2,7‐diyl)dithiophene (Th‐F‐Th) and 5,5′‐(9,9‐dioctyl‐9H‐fluorene‐2,7‐diyl)bis(2,3‐dihydrothieno[3,4‐b][1,4]dioxine) (EDOT‐F‐EDOT), were synthesized via Stille coupling reaction and electropolymerized to form corresponding polymers P(Th‐F‐Th) and P(EDOT‐F‐EDOT). Furthermore, the optoelectronic properties of the obtained monomers and polymers were explored using cyclic voltammetry (CV), UV–vis, and emission spectra and in situ spectroelectrochemical techniques. The band gap values of monomers calculated by DFT were 3.75 eV for EDOT‐F‐EDOT and 4.03 eV for Th‐F‐Th, while that of P(EDOT‐F‐EDOT) and P(Th‐F‐Th) were brought down to 1.70 and 2.10 eV, respectively. Both polymers exhibited excellent redox activity and electrochromic performance. P(EDOT‐F‐EDOT) exhibited a maximum optical contrast of 25.8% at 500 nm in visible region with a response time of 1.2 s. In addition, the coloration efficiency of P(EDOT‐F‐EDOT) was calculated to be 220 cm² C^?1. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 325–334     

Determination of glyphosate in foodstuff by one novel chemiluminescence-molecular imprinting sensor

A novel chemiluminescence (CL) sensor for the determination of glyphosate (GLY) was made up based on molecularly imprinted polymer (MIP). The molecularly imprinted microspheres (MIMs) with a small dimension which possess extremely high surface-to-volume ratio were synthesized using precipitation polymerization with GLY as template. And then the MIMs were modified on glass sheets, which were placed at the bottom of wells of microplate as the recognizer. Subsequently, a highly selective and high throughput chemiluminescence (CL)-molecular imprinting (MI) sensor for detection of GLY was achieved. Influencing factors were investigated and optimized in detail. The method can perform 96 independent measurements sequentially in 10 min and the limit of detection (LOD) for GLY was 0.046 μg mL(-1). The relative standard deviation (RSD) for 11 parallel measurements of GLY was 4.68%. The results show that CL-MI sensor can become a useful analytical technology for quick molecular recognition.     

X-ray Raman scattering provides evidence for interfacial acetonitrile-water dipole interactions in aqueous solutions

Aqueous solutions of acetonitrile (MeCN) have been studied with oxygen K-edge x-ray Raman scattering (XRS) which is found to be sensitive to the interaction between water and MeCN. The changes in the XRS spectra can be attributed to water directly interacting with MeCN and are reproduced by density functional theory calculations on small clusters of water and MeCN. The dominant structural arrangement features dipole interaction instead of H-bonds between the two species as revealed by the XRS spectra combined with spectrum calculations. Small-angle x-ray scattering shows the largest heterogeneity for a MeCN to water ratio of 0.4 in agreement with earlier small-angle neutron scattering data.     

Novel microwave-assisted solvothermal synthesis of NaYF4:Yb,Er upconversion nanoparticles and their application in cancer cell imaging

This work reports the novel microwave-assisted solvothermal synthesis and structural, topographic, spectroscopic characterization of NaYF(4):Yb,Er upconversion nanoparticles (UCNPs) as well as their application in the labeling of HeLa cells. The nanoparticles were prepared in ethylene glycol, with rare earth acetates as precursor and NH(4)F and NaCl as the fluorine and sodium sources. X-ray diffraction, transmission electron microscopy, and luminescence spectroscopy were applied to characterize the nanoparticles. Experimental results showed that the microwave-assisted solvothermal method is an effective approach to create highly crystalline, strongly luminescent UCNPs at a lower temperature (160 °C) and within a significantly shortened reaction time (only 1 h) compared to the traditional methods. The effect of fluorine source on the optical properties of UCNPs was investigated by using NH(4)F, NH(4)HF(2), NaF, and 1-butyl-3-methylimidazolium tetrafluoroborate (BmimBF(4)) as different fluorine sources; NH(4)F proved to be the best one, making the luminescent intensity increase at least 2 orders of magnitude. The UCNPs with four different colors (green, yellow, orange, and cyan) were successfully obtained. After being modified with amino groups and coupled with CEA-8 antibody, the obtained nanoparticles were successfully applied in the specific fluorescent immunolabeling and imaging of HeLa cells to further verify their function as a marker in immunolabeling.     

Helical Self-Assembly of Optically Active Phthalocyanine Derivatives: Effect of Zn?O Coordination Bond on Morphology and Handedness of Nanostructures

Two optically active phthalocyanine derivatives with eight peripheral chiral (S)-4′-(2-methylbutoxy)biphenyl moieties on the β-position of the phthalocyanine ring are synthesized. The circular dichroism (CD) spectra show signals in the Q absorption region for both compounds 1 and 2 in chloroform solution, indicating the effective chiral-information transfer from the peripheral chiral (S)-4′-(2-methylbutoxy)biphenyl side chains to the phthalocyanine chromophore at the molecular level. Their self-assembling properties are further investigated by using electronic absorption and Fourier transform infrared spectroscopy, transmission electronic microscopy, scanning electronic microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. Experimental results reveal the effect of the metal-coordination bond on molecular packing models in these nanostructures, which in turn results in the self-assembled nanostructures with different morphologies, from nanosheets for 1 to helical nanofibers for 2 . In addition, good semiconducting properties of the nanostructures fabricated from phthalocyanine derivatives 1 and 2 are revealed by current–voltage measurements.     

Numerical modeling of a hybrid PCM-based wall for energy usage reduction in the warmest and coldest months

Journal of Thermal Analysis and Calorimetry - In this study, the effects of using hybrid PCM inside the wall on reducing heat transfer have been examined during the hottest (July) and coldest...     

微孔-介孔多级孔炭材料的制备及电化学电容性能研究

采用有机-有机自组装法, 并结合后活化法制备了一类具有微孔-介孔复合孔结构的多级孔炭材料(HPC), 并研究了这类材料的电化学电容性能. 孔结构测试表明, 采用KOH后活化法可以在介孔炭的孔壁上控制性地生成微孔. 电化学测试表明, 与文献中报道的硬模板法制备的介孔炭相比, HPC具有更好的电化学电容性能. 在100 mV/s的快速电压扫描速率下, 它的比电容值能达到168.9 F/g. 更值得指出的是, HPC的高频电容性能非常优异, 在1 Hz时的比电容值高达180 F/g, 这一数值优于任何其它类的电极材料. HPC优异的电化学电容性能应当归功于它特殊的多级孔结构, 有助于电解质离子在孔道内的快速扩散.     

5英寸锑化铟晶片加工及表征

锑化铟(InSb)材料因其特殊的性质被广泛用于红外光电探测等领域。随着更大面阵中波红外焦平面探测器的发展以及对低成本InSb红外探测器的需求,所需的晶片材料尺寸也日益增加。本文通过采用新结构石墨托以及高精度低损伤单线切割实现了5英寸InSb晶体定向断段;采用低损伤边缘倒角技术同时优化研磨参数改善了5英寸InSb晶片研磨;通过优化贴片工序提高了5英寸InSb晶片抛光后的平整度;通过优化抛光液pH值以及配比提高了5英寸InSb晶片表面质量。同时,使用X射线晶体定向仪、原子力显微镜等测试仪器对5英寸InSb晶片的晶向及偏差、抛光表面宏观质量、几何参数、表面粗糙度、晶格质量进行了测试表征。测试结果表明,采用优化后的加工工艺制备出了高质量的5英寸InSb晶片,能够满足InSb红外探测器制备需求。