具有高散射能力的聚碳酸酯复合材料的制备与性能研究

以双酚A型聚碳酸酯(PC)为基体、苯乙烯-丙烯腈共聚物(SAN)为散射体,通过熔融共混方法制备了同时具备高透光率和高雾度的高散射聚碳酸酯光散射片,研究了SAN含量对光散射片微观结构和光散射性能的影响,发现透光率和雾度同时随着散射体含量增加而提高的现象.研究结果表明,当SAN含量低于30%时,分散相为球形颗粒,颗粒的平均粒径随着SAN含量的增加而增加,而颗粒的数量浓度则随之减小,这使得其透光率和雾度均随着SAN含量的增加而增加,当SAN含量为30%时,透光率和雾度达到最大值,分别为89.1%和91.7%.并结合Mie散射理论解释说明了透光率和雾度同时随着散射体含量的增加而提高的现象.但当SAN含量的进一步增加,分散相颗粒尺寸已远大于光波的波长,不再适用于Mie散射理论,且部分不再呈球形颗粒,使得PC片的透光率和雾度略有降低.     

微波处理和溶胶凝胶法共同改性废胶粉及其与天然橡胶复合材料性能的研究

采用微波处理打断废胶粉(WRP)的三维网状结构用来提高WRP在有机溶剂中的溶胀性,然后采用溶胶凝胶法,将微波改性后的WRP浸入正硅酸乙酯中,通过水解反应和缩合反应,在WRP表面原位生成SiO2网络,从而制得改性废胶粉(MWRP).将制得MWRP与天然橡胶(NR)共混,制备了NR/MWRP复合材料,研究了NR/MWRP复合材料的性能.通过热重分析仪、差示扫描量热仪和力学分析表明微波处理最佳时间是20 s.由于微波处理提高了NR与WRP的相容性,原位生成的SiO2粒子起到了补强作用,所以所制备的NR/MWRP复合材料拥有较好的力学性能;随着Si69的加入,抑制了SiO2粒子聚集,提高了SiO2粒子的分散性,从而进一步提高复合材料的力学性能并降低复合材料的Payne效应;在进行频率扫描时,硫化胶的储存模量随频率的增大而增大;硫化胶的温度扫描结果表明,随着温度的升高,复合材料中SiO2粒子聚集程度加剧并且复合材料出现老化的现象.为了提高复合材料的耐老化性能,N,N-间苯撑双马来酰亚胺(BMI)作为一种防老剂加入复合材料中,BMI利用Diels-Aider反应补偿橡胶在老化过程中所损失的交联键并提高NR与WRP的界面相容性,从而提高复合材料的耐老化性能.     

Evaluation of measurement uncertainty in EA–IRMS: for determination of δ 13C value and C-4 plant sugar content in adulterated honey

In this study, the method for determining the stable carbon isotope ratio value was validated. Measurement uncertainty of stable carbon isotope ratio value of whole honey and its extracted protein derived from repeatability, reference gas, reference standards and calibration curve was calculated by applying the “bottom-up” approach according to Eurachem/CITAC guide. The expanded uncertainties for all results ranged from 0.14 to 0.19 ‰, with most of them between 0.15 and 0.16 ‰ (the coverage factor k = 2, the level of confidence p is approximately 95 %). The percentage contribution of each source to the relative combined uncertainty was calculated. The data indicated that calibration curves have more contribution to the relative combined uncertainty than repeatability and reference standards. On the other hand, the measurement uncertainty of C-4 sugar content in honey was estimated. Based on these results, 58 honey samples, such as acacia, chaste, Northeast China black bee, flowers and jujube honey, have been gathered to determine the C-4 plant sugar content adulteration in honey by elemental analyzer with an isotope ratio mass spectrometer. It can be found that all honey samples were not adulterated by C-4 plant sugar.     

Evaluating a four-directional benzene-centered aliphatic polyamine curing agent for epoxy resins

A four-directional benzene-centered aliphatic polyamine, MXBDP, with high functionality and low volatility, is used to cure epoxy resin (DGEBA). Herein we originally report the isothermal cure kinetics and dynamic mechanical properties of DGEBA/MXBDP. Differential scanning calorimetry confirms that MXDBP is more reactive than commercial linear metaxylenediamine and branched Jeffamine T-403 and the isothermal curing reaction is autocatalytic. The Kamal model is found to be able to well describe the curing rate up to the onset of diffusion control, and the excellent match over the whole conversion range is achieved using the extended Kamal model. Interestingly, the isoconversional kinetic analysis indicates that the effective reaction activation energy (E _α ) changes substantially with conversion, and ultimately decreases to a very small value (<10 kJ mol^?1) because of the diffusion-controlled reaction kinetics. Then, dynamic mechanical analysis reveals that DGEBA/MXBDP exhibits the higher α- and β-relaxation temperatures and the much higher crosslink density than DGEBA/metaxylenediamine. Our experiment results support that MXBDP has the high reactivity and improved thermal resistance in combination with the advantages of the high functionality, low volatility and decreased CO₂ absorption. Therefore, MXBDP may be especially suitable for room temperature-cure epoxy coatings and adhesives.     

含环糊精链节的拓扑高分子

星形、超支化、树枝状、刷状等具有支化拓扑结构的高分子通常具有不同于直链结构高分子的优异性能。将有客体包合功能的环糊精与其结合构筑环糊精拓扑高分子体系,有望在分子识别、基因传输、药控释放等领域得到应用。本文根据高分子拓扑形态的不同,从星形、超支化、树枝状以及其他拓扑形态环糊精聚合物的合成及自组装构筑等方面进行了总结和评述,并在此基础上展望了基于环糊精的拓扑高分子的研究方向和发展趋势。     

Ru-catalyzed highly enantioselective hydrogenation of α-keto Weinreb amides

Asymmetric hydrogenation of α-keto Weinreb amides has been realized with [Ru((S)-Sunphos)(benzene)Cl]Cl as the catalyst and CeCl 3·7H2O as the additive.A series of enantiopure α-hydroxy Weinreb amides(up to 97% ee) have been obtained.Catalytic amount of CeCl3·7H2O is essential for the high reactivity and enantioselectivity and the ratio of CeCl3·7H2O to [Ru((S)-Sunphos)(benzene)Cl]Cl plays an important role in the hydrogenation reaction.     

Tuning of Ti-doped mesoporous silica for highly efficient enrichment of phosphopeptides in human placenta mitochondria

Extraction of phosphopeptides from rather complex biological samples has been a tough issue for deep and comprehensive investigation into phosphoproteomes. In this paper, we present a series of Ti-doped mesoporous silica (Ti-MPS) materials with tunable composition and controllable morphology for highly efficient enrichment of phosphopeptides. By altering the molar ratio of silicon to titanium (Si/Ti) in the precursor, the external morphology, Ti content, internal long-rang order, and surface area of Ti-MPS were all modulated accordingly with certain regularity. Tryptic digests of standard phosphoprotein α- and β-casein were employed to assess the phosphopeptide enrichment capability of Ti-MPS series. At the Si/Ti molar ratio of 8:1, the optimum enrichment performance with admirable sensitivity and capacity was achieved. The detection limit for β-casein could reach 10 fmol, and 15 phosphopeptides from the digest of α-casein were resolved in the spectrum after enrichment, both superior to the behavior of commercial TiO₂ materials. More significantly, for the digest of human placenta mitochondria, 396 phosphopeptides and 298 phosphoproteins were definitely detected and identified after enrichment with optimized Ti-MPS material, demonstrating its remarkable applicability for untouched phosphoproteomes. In addition, this research also opened up a universal pathway to construct a composition-tunable functional material in pursuit of the maximum performance in applications.

刺激响应型肽自组装及其应用

肽自组装体由于具有结构稳定、易调控、生物相容性好、可生物降解等优点,在构筑新型材料及生物医药领域表现出了巨大潜力。本文介绍了肽自组装的概念、机理和应用,详细归纳了刺激响应型肽自组装的研究进展;按照刺激源的不同将刺激响应型肽自组装分为pH响应型肽自组装、温度响应型肽自组装、溶剂响应型肽自组装、光响应型肽自组装、超声波响应型肽自组装以及离子响应型肽自组装;列举了肽自组装在药物控释、脊髓损伤修复、仿酶催化、生物模板等领域的应用。最后,基于目前肽自组装存在的一些问题(如影响肽自组装结构的外界因素不易精准把控、自组装的研究与生命科学领域的交叉程度低等)对肽自组装的发展做了展望。     

Advanced Li-Ion Batteries with High Rate,Stability, and Mass Loading Based on Graphene Ribbon Hybrid Networks

To optimize the cycle life and rate performance of lithium-ion batteries (LIBs), ultra-fine Fe₂O₃ nanowires with a diameter of approximately 2 nm uniformly anchored on a cross-linked graphene ribbon network are fabricated. The unique three-dimensional structure can effectively improve the electrical conductivity and facilitate ion diffusion, especially cross-plane diffusion. Moreover, Fe₂O₃ nanowires on graphene ribbons (Fe₂O₃/GR) are easily accessible for lithium ions compared with the traditional graphene sheets (Fe₂O₃/GS). In addition, the well-developed elastic network can not only undergo the drastic volume expansion during repetitive cycling, but also protect the bulk electrode from further pulverization. As a result, the Fe₂O₃/GR hybrid exhibits high rate and long cycle life Li storage performance (632 mAh g⁻¹ at 5 A g⁻¹, and 471 mAh g⁻¹ capacity maintained even after 3000 cycles). Especially at high mass loading (≈4 mg cm⁻²), the Fe₂O₃/GR can still deliver higher reversible capacity (223 mAh g⁻¹ even at 2 A g⁻¹) compared with the Fe₂O₃/GS (37 mAh g⁻¹) for LIBs.