The sequestration of U(VI) on functional β-cyclodextrin-attapulgite nanorods

Eight elastomeric composites (NRU, GR1–GR4, NRBG08–NRBG24) containing mixtures of different proportions of heavy metal additives (Bi, W, Gd and Sb) have been synthesized and examined as protective shields. The NRU sample was a pure rubber matrix and served as a reference sample for heavy metal modified composites. Experimental procedure used for evaluation of the composite shields and their attenuation properties was based on the utilization of HPGe spectrometry and analysis of X-ray fluorescence radiation intensity of the heavy metal additives in the following energy ranges for: Sb (20–35 keV), Gd (35–55 keV), W (55–70 keV) and Bi (70–90 keV). The main contributor to the induced X-ray fluorescence radiation within the shield is Bi additive and the intensity of the X-ray radiation generated within the energy range of 70–90 keV strongly depends on its concentration. It was found that decreasing concentration of the Bi fraction from 0.35 (GR samples) to 0.15 (NRBG samples) results in significant lowering Bi X-ray fluorescence radiation within the 70–90 keV energy range. Secondary effect of decreasing Bi concentration was efficient diminishing excitation processes for lower Z heavy metal additives (W, Gd and Sb, GR vs. NRBG samples). As the final quality parameter of the shielding properties for the examined elastomers, dose reduction factor (DRF) coefficients were calculated for each shield. It was found, that the best shielding properties are observed for composites with lower Bi concentration (0.15 vs. 0.35 Bi mass fraction) with only slight further improvement of their parameters (DRF) with increasing of Gd concentration (Gd mass fraction 0.08, 0.16 and 0.24). The most efficient dose reduction composite was found to be NRBG24 elastomer with DRF value 0.47 (53 % dose reduction) for ca. 2 mm and 0.44 g/cm² layer thickness.     

Self-calibration method for cerium-doped lanthanum bromide scintillator detector in the 0.1–2.0 MeV energy range

In recent years, the cerium-doped lanthanum bromide, LaBr₃ (Ce = 5 %) detector is increasingly playing an important role in radiation measurements because of its higher energy resolution (~3 % at 662 keV), faster luminescence decay time (~35 ns) and higher detection efficiency compared to 7.65 cm × 7.65 cm NaI(Tl) detector. Intrinsic spectra between 1,800 and 3,000 keV derived from internal radioactivity within LaBr₃(Ce) scintillators have been investigated in some literatures, and these results are confirmed by the experiments in this work. In this paper, a new method for LaBr₃(Ce) detector energy calibration from 100 to 2,000 keV is proposed using the intrinsic spectra (self-calibration) instead of the standard gamma sources. Proof-of-concept experiment results show that self-calibration can guarantee energy accuracy of better than 0.815 % and can be applied outside the laboratory. The stability and applicability of this method are also investigated systematically.     

硫代多联吡啶铂(Ⅱ)配合物的合成、性质及在光催化制氢中的应用

合成了2个新配体4-(4-硫代乙酸)甲苯基-6-苯基-2,2’-联吡啶HC^N^N(PhCH2SCOCH3)(L3)和6-(4-硫代乙酸)甲苯基-2,2’-联吡啶HC^N^N(CH2SCOCH3)(L5)及其发光的铂(Ⅱ)配合物ClPtC^N^N(PhCH2SCOCH3)(C3)和ClPtC^N^N(CH2SCOCH3)(C5).通过1H NMR谱和质谱对它们的结构进行了表征,采用X射线单晶衍射分析确定了C3的晶体结构.利用紫外-可见吸收光谱、发射光谱及激发态寿命测定研究了它们的光物理性质和电化学性质,以及配合物作为光敏剂在光催化制氢中的应用.通过系列配合物产氢效率的比较,揭示了它们的产氢效率和激发态寿命的关系.     

2,6,6-三甲基-双环[3,1,1]庚基-3-(4-芳基-2-噻唑)腙类化合物的合成及其抑菌和抗肿瘤活性研究

以α-蒎烯为起始原料,经加成、氧化、缩合制得中间体,继而与α-溴代芳基乙酮在常温下反应合成12个新型2,6,6-三甲基-双环[3,1,1]庚基-3-(4-芳基-2-噻唑)腙类化合物,产率达52.4%~88.9%.其结构经1H NMR,13C NMR,IR,LC/MS和元素分析进行了确证.初步生物活性测试结果表明:部分目标化合物具有较好的抑菌活性和一定的抗肿瘤活性.     

Determination of fatty acids in soil samples by gas chromatography with mass spectrometry coupled with headspace solid‐phase microextraction using a homemade sol–gel fiber†

Through the use of a homemade sol–gel‐derived fiber, a headspace solid‐phase microextraction technique coupled to gas chromatography with mass spectrometry was developed for the determination of fatty acids with long, even‐numbered carbon chains (C₁₂–C₂₄) in soil samples. The experimental parameters such as reaction time, temperature, and ionic strength that might affect derivatization, extraction, and desorption were investigated. Under the optimized conditions, the linearity of the method ranged from 0.1 to 100 mg/L with a correlation coefficient >0.997. The limit of detection values based on a signal‐to‐noise ratio of 3:1 were determined with the concentration from 0.39 to 39.4 μg/L. The recoveries of the method for the soil samples were from 91.15 to 108.1%. This developed method using a homemade fiber showed a higher sensitivity than that using a commercial polydimethylsiloxane fiber and was also for the analysis of real soil samples from the Paomaling geological park of China.     

Counterflow isotachophoresis in a monolithic column

This study describes stationary counterflow isotachophoresis (ITP) in a poly(acrylamide‐co‐N,N′‐methylenebisacrylamide) monolithic column as a means for improving ITP processing capacity and reducing dispersion. The flow profile in the monolith was predicted using COMSOL's Brinkman Equation application mode, which revealed that the flow profile was mainly determined by monolith permeability. As monolith permeability decreases, the flow profile changes from a parabolic shape to a plug shape. An experimental monolithic column was prepared in a fused‐silica capillary using an ultraviolet‐initiated polymerization method. A monolithic column made from 8% (wt.) monomer was chosen for the stationary counterflow ITP experiments. Counterflow ITP in the monolithic column showed undistorted analyte zones with significantly reduced dispersion compared to the severe dispersion observed in an open capillary. Particularly, for r‐phycoerythrin focused by counterflow ITP, its zone width in the monolithic column was only one‐third that observed in an open capillary. These experiments demonstrate that stationary counterflow ITP in monoliths can be a robust and practical electrofocusing method.     

A quick,easy, cheap,effective, rugged,and safe sample pretreatment and liquid chromatography with tandem mass spectrometry method for the simultaneous quantification of 33 mycotoxins in Lentinula edodes

Lentinula edodes, one of the most cultivated edible fungi in the world, are usually neglected for mycotoxins contamination due to the initial thinking of its resistance to mycotoxingenic molds. In the present study, a sensitive and reliable liquid chromatography with tandem mass spectrometry method was developed for the simultaneous quantification of 33 mycotoxins in L. edodes. Targeted mycotoxins were extracted using a quick, easy, cheap, effective, rugged, and safe procedure without any further clean‐up step, and analyzed by liquid chromatography with tandem mass spectrometry on an Agilent Poroshell 120 EC‐C₁₈ column (100 × 3 mm, 2.7 μm) with a linear gradient elution program using water containing 5 mM ammonium acetate and methanol as the mobile phase. After validation by determining linearity (R² > 0.99), sensitivity (LOQ ≤ 20 ng/kg), recovery (73.6–117.9%), and precision (0.8–19.5%), the established method has been successfully applied to reveal the contamination states of various mycotoxins in L. edodes. Among the 30 tested samples, 22 were contaminated by various mycotoxins with the concentration levels ranging from 3.3–28 850.7 μg/kg, predicting that the edible fungus could be infected by the mycotoxins‐producing fungi. To the best of our knowledge, this is the first report about real mycotoxins contamination in L. edodes.     

钯(Ⅱ)类抗肿瘤药物研究进展

20世纪60年代,美国密执安州立大学Rosenberg发现了顺铂具有抗癌活性,开辟了金属类抗肿瘤药物研究的新领域.经过40余年的研究,已相继成功开发了卡铂、奈达铂、奥沙利铂、舒铂、洛铂和双环铂等铂类抗肿瘤药物.虽然对于铂类抗肿瘤药物研究取得了一定的成绩,但在临床使用过程中也存在一些问题,如其毒副作用和抗药性,限制了其在临床上的进一步广泛应用.为了解决这些问题,科研工作者开始寻找新的金属类抗肿瘤药物以弥补现有铂类抗肿瘤药物的不足.在金属元素中,唯有钯(II)与铂(II)配合物具有相似或相同的结构特征,进而表现出相近或相似的化学性质.因此,继铂类抗肿瘤配合物后,钯(II)配合物作为潜在抗肿瘤药物成为一个诱人的领域.本文综述了近年来钯(II)类抗肿瘤药物的研究进展,并探讨了其构效关系,这对于指导新型钯(II)类抗肿瘤药物的合成具有重要的参考价值.     

氮掺杂氧化石墨催化苄胺氧化

酰胺类化合物是重要的化工原料和生物医药合成的中间体,但其制备大部分需要使用贵金属催化剂,因此,发展廉价金属乃至非金属催化剂具有重大意义.本文使用化学气相沉积法合成了氮掺杂的层状氧化石墨材料,并将其应用于苄胺氧化反应中,实现了液相中酰胺合成的非金属催化过程.在水相中可以活化氧气较高产率地生成亚胺化合物N-苄亚甲基苄胺,并且成功实现了在氨水反应介质中高转化率和选择性地生成苯甲酰胺.此外,对反应中的影响因素进行了逐一研究,并从多方面探究了该反应中氨水的作用以及反应最可能的历程,提出了一条经过包括亚胺在内的多个中间产物的反应路径.本工作对于研究碳氢键的活化过程以及拓宽碳催化领域进行了有益的尝试.