毛细管电泳-电致化学发光法测定兔血浆中的羟考酮

基于稀土Eu(Ⅲ)掺杂的类普鲁士蓝膜修饰的铂电极为工作电极,建立了测定羟考酮的毛细管电泳-电致化学发光分析方法。考察了检测电位、运行缓冲溶液的酸度及浓度、分离电压、进样条件等对电泳分离效果及检测灵敏度的影响。在最佳的实验条件下,羟考酮可在4 min内得到分离,其ECL强度值与羟考酮的质量浓度在7.0×10-2～7.0μg/mL和7.0～70.0μg/mL范围内呈良好的线性关系,检出限为4.2×10-2μg/mL(3σ),峰高和迁移时间的相对偏差分别为3.6%和0.48%(n=6)。方法用于兔血浆中羟考酮含量的检测,加标回收率在99.7%～101.0%之间。     

KIO4-四硼酸钠系统阻抑亮绿褪色动力学光度法测定痕量Ir（Ⅳ）

基于H2SO4介质及四硼酸钠缓冲溶液中,80℃水浴中,Ir(Ⅳ)对KIO4氧化亮绿褪色反应具有阻抑作用,据此建立了阻抑动力学光度法测定痕量Ir(Ⅳ)的新方法。阻抑反应(吸光度A)与非阻抑反应(吸光度A0)吸光度差值△A与Ir(Ⅳ)的质量浓度ρ在0.0002～0.08μg/mL范围内呈良好的线性关系,检出限为2.969×10-10g/mL。对1μg/25 mL Ir(Ⅳ)标准溶液测定的相对标准偏差为1.7%(n=11)。测定了动力学参数,反应对Ir(Ⅳ)为一级反应,试验条件下,总反应为准一级反应,表观速率系数为2.883×10-4/s,表观活化能为52.2 kJ/mol。方法用于分子筛和活性炭样品中痕量Ir(Ⅳ)测定,加标回收率在98.1%～104.9%范围,符合痕量分析要求。     

Cross double Mannich reaction catalyzed by I2: Synthesis of highly substituted 4-piperidones

Cross double Mannich reaction and tandem cyclization were achieved under iodine catalyzed conditions,yielding a series of highly substituted 4-piperidones.Among the possible diastereomers,only one diastereomer was isolated,which could be ascribed to the chair-like transition state in six-membered ring,in which all of the hindered groups are located in the pseudoequatorial orientation.     

A novel dimeric procyanidin glucoside from Polygonum aviculare

A novel dimeric procyanidin glucoside,catechin 3-O-acetate-(4 α→8)-catechin 3-O-acetate-3’-O- β-D-glucopyranoside(1), along with five flavonoids and one lignan were isolated from the aerial parts of Polygonum aviculare.Their structures were elucidated by spectroscopic analyses including 1D,2D NMR,MS and CD methods.     

支撑磷脂双层膜的研究进展

支撑磷脂双层膜(supported phospholipid bilayers,SPBs)是细胞膜研究中普及的模型,是固定生物活性物质的理想材料,不仅可以保持生物分子的活性,还能有效抑制其他生物分子的非特异性吸附,在跨膜蛋白、仿生膜、水处理、生物医学和生物传感器等研究领域具有广泛的应用前景。本文介绍了支撑磷脂双层膜的表征方法和制备方法,包括Langmuir Blodgett(LB)膜提拉法、囊泡融合法和LB膜提拉法与囊泡融合联合法;详细阐述了囊泡融合法制备SPBs的机理;综述了囊泡融合法制备SPBs的影响因素,包括囊泡浓度、缓冲溶液、温度、囊泡和基底表面电荷等因素;列举了支撑磷脂膜的应用,并展望了支撑磷脂双层膜的研究趋势。     

Crystallization Elution Fractionation and Thermal Gradient Interaction Chromatography. Techniques Comparison

Summary: The chemical composition distribution has been shown to be the most critical and discriminating parameter in understanding the performance of industrial polyolefins with non homogeneous comonomer incorporation. The chemical composition distribution is being analyzed by well known techniques such as temperature rising elution fractionation, TREF, crystallization analysis fractionation, CRYSTAF and crystallization elution fractionation, CEF. These techniques separate according to crystallizability and provide a powerful and predictable separation of components based on the presence of branches, irregularities or tacticity differences, independently of the molar mass. TREF, CRYSTAF and CEF can not be used, however, for the separation of more amorphous resins, and may not always provide the best solution for complex multi-component resins due to the existence of some co-crystallization. The application of high temperature interactive HPLC to polyolefins opened a new route to characterize these types of polymers. The use of solvent gradient HPLC for separation of polyethylene and polypropylene and the developments in HPLC on carbon based columns extended further the application of high temperature HPLC in polyolefins. A new approach has been developed recently using the carbon based column but replacing solvent gradient by a thermal gradient which facilitates the analysis of polyethylene copolymers and provides a powerful tool for the analysis of elastomers. Thermal gradient interaction chromatography (TGIC) is being compared with TREF and CEF with the analysis of model samples. The advantages/disadvantages of each technique are being investigated and discussed. The combination of TGIC and TREF/CEF provides an extended range of separation of polyolefins.     

Simultaneous analysis and retention behavior of major isoflavonoids in Radix Puerariae lobatae and Radix Puerariae thomsonii by high performance liquid chromatography with cyclodextrins as a mobile phase modifier

In order to differentiate two species of Radix Puerariae (Radix Puerariae lobatae and Radix Puerariae thomsonii) and to determine major isoflavonoids (puerarin, daidzin, daidzein and genistein) in the samples, a simple high performance liquid chromatography (HPLC) method with isocratic elution employing cyclodextrins (CDs) as mobile phase additives was developed. Various factors affecting the retention of isoflavonoids in the C₁₈ reversed-phase column, such as the nature of CDs, the concentration of hydroxypropyl-β-cyclodextrin (HP-β-CD) and the methanol percentage in the mobile phase, were studied. Experimental results confirmed that HP-β-CD, as a very effective mobile phase additive, could markedly reduce the retention of isoflavonoids, especially daidzein and genistein. The elution of four isoflavonoids could be achieved on a Kromasil^® C₁₈ column within 56 min by using the methanol–water contained 5 mM HP-β-CD (25/75, v/v) mixture as the mobile phase. The formation of the inclusion complexes between isoflavonoids and HP-β-CD explained the modification of the retention of analytes. The apparent formation constants determined by HPLC confirmed that the stoichiometry of HP-β-CD-isoflavonoid complexes was 1:1, and the stability of the complexes depended on the size and property of isoflavonoids. The optimized method was successfully applied for the simultaneous determination of major isoflavonoids in P. lobatae and P. thomsonii samples. This work provides a useful method for the analysis of traditional Chinese herbs.     

Two new diterpenoids from the buds of Wikstroemia chamaedaphne

Two new diterpenoids, wikstroelide Q (1) and prostratin Q (5), together with three known diterpenoids, pimelea factors P? (2), P? (3), and prostratin (4), and five known lignans, (+)-epipioresinol (6), (+)-isolariciresinol (7), (?)-lariciresinol (8), (+)-epi-sesaminone (9), and prestegane B (10), were isolated from the buds of Wikstroemia chamaedaphne Meissn. Their structures were elucidated by a combination of spectroscopic analyses. Compounds 1–10 were evaluated for their cytotoxicities against HL-60, SMMC-7721, A549, MCF-7, SW480, and BEAS-2B cell lines in vitro.     

Efficient Non-sterilized Fermentation of Biomass-Derived Xylose to Lactic Acid by a Thermotolerant Bacillus coagulans NL01

Xylose is the major pentose and the second most abundant sugar in lignocellulosic feedstock. Its efficient utilization is regarded as a technical barrier to the commercial production of bulk chemicals from lignocellulosic biomass. This work aimed at evaluating the lactic acid production from the biomass-derived xylose using non-sterilized fermentation by Bacillus coagulans NL01. A maximum lactic acid concentration of about 75 g/L was achieved from xylose of 100 g/L after 72 h batch fermentation. Acetic acid and levulinic acid were identified as important inhibitors in xylose fermentation, which markedly reduced lactic acid productivity at 15 and 1.0 g/L, respectively. But low concentrations of formic acid (<2 g/L) exerted a stimulating effect on the lactic acid production. When prehydrolysate containing total 25.45 g/L monosaccharide was fermented with B. coagulans NL01, the same preference for glucose, xylose, and arabinose was observed and18.2 g/L lactic acid was obtained after 48 h fermentation. These results proved that B. coagulans NL01 was potentially well-suited for producing lactic acid from underutilized xylose-rich prehydrolysates.     

Controlling the properties of poly(amino ester urethane)–poly(ethylene glycol)–poly(amino ester urethane) triblock copolymer pH/temperature-sensitive hydrogel

A series of triblock copolymers composed of poly(ethylene glycol) (PEG) and poly(β-amino ester urethane) (PAEU) was synthesized and characterized. Its aqueous solution can be used as a non-cytotoxic, biodegradable, and pH/temperature-sensitive hydrogel system. The copolymer solutions exhibited sol-to-gel and gel-to-sol transitions with increasing pH and temperature, respectively. The properties of this hydrogel system, such as its sol–gel transition diagram, mechanical properties, and degradation rate, can be controlled by modulating the PEG molecular weight, PAEU block length, copolymer concentration, or structure of the monomers. The presence of urethane groups and ionized tertiary amine groups in the copolymer solution at lightly acidic pH may lead to a strong interaction of the copolymer with formulated bioactive therapeutic agents, while the existence of the gel state under physiological conditions (37 °C, pH 7.4) may enable this copolymer hydrogel to be applicable as a drug/protein carrier.