脉冲磁化条件下非晶磁芯的损耗特性

基于工频或高频磁化条件下磁芯的测试数据不能准确反映磁芯在单次脉冲磁化下的性能,给出了一种脉冲磁化条件下磁芯性能的测试方法和数据处理方法,实验研究了快脉冲磁化条件下非晶态合金磁芯的损耗特性,磁芯最短饱和时间67 ns,最大磁化速率达到40 T/s。通过数据处理,给出了磁芯损耗与磁化速率的关系曲线,获得了不同磁化速率下磁芯的损耗数据。分析了脉冲磁化条件下涡流损耗和磁滞损耗所占的比例。研究结果表明:脉冲磁化条件下非晶态合金磁芯损耗与磁化速率关系符合饱和波模型,磁芯损耗随磁化速率增大而线性增大。     

A facile strategy to synthesize bimetallic Au/Ag nanocomposite film by layer-by-layer assembly technique

A facile strategy has been developed for the preparation of bimetallic gold–silver (Au–Ag) nanocomposite films by alternating absorption of poly-(ethyleneimine)–silver ions and Au onto substrates and subsequent reduction of the silver ions. The composition, micro-structure and properties of the {PEI–Ag/Au}_n nanocomposite films were characterized by ultraviolet visible spectroscopy (UV–vis), transmisson electron microscopy (TEM), field emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), surface enhanced Raman scattering (SERS) and cyclic voltammetry (CV). The UV–vis characteristic absorbances of {PEI–Ag/Au}_n nanocomposite thin film increase almost linear with the number of bilayers, which indicates a process of uniform assembling. Appearance of a double plasmon bands in the visible region and the lack of apparent core–shell structures in the TEM images confirm the formation of bimetallic Au–Ag nanoparticles. The result of XPS also demonstrates the existence of Ag and Au nanoparticles in the nanocomposite films. TEM and FESEM images show that these Ag and Au nanoparticles in the films possess sphere structure with the size of 20–25 nm. The resulting {PEI–Ag/Au}_n films inherit the properties from both the metal Ag and Au, which exhibits a unique performance in SERS and electrocatalytic activities to the oxidation of dopamine. As a result, the {PEI–Ag/Au}_n films are more attractive compared to {PEI–Ag/PSS}_n and {PEI/Au}_n films.     

Relative position determination of a lunar rover using high-accuracy multi-frequency same-beam VLBI

Multi-frequency same-beam VLBI means that two explorers with a small separation angle are simultaneously observed with the main beam of receiving antennas. In the same-beam VLBI, the differential phase delay between two explorers and two receiving telescopes can be obtained with a small error of several picoseconds. The differential phase delay, as the observable of the same-beam VLBI, gives the separation angular information of the two explorers in the celestial sphere. The two-dimensional relative position on the plane-of-sky can thus be precisely determined with an error of less than 1 m for a distance of 3.8×105 km far away from the earth, by using the differential phase delay obtained with the four Chinese VLBI stations. The relative position of a lunar rover on the lunar surface can be determined with an error of 10 m by using the differential phase delay data and the range data for the lander when the lunar topography near the rover and the lander can be determined with an error of 10 m.     

电子式互感器高频数据采集与传输方案

针对当前电力系统电子式互感器采样率偏低,难以满足行波测距装置准确定位电力故障的问题,提出了电子式互感器高频信号采集与传输方案;电子式互感器内部为Rogowski 线圈,电网电流信号被其微分作用转换为小电压信号并附加了90°超前相差,设计积分电路补偿该相差;设计采样率为2 MSps的高频信号采集电路,FPGA通过LVDS接口读取采样数据,并进行幅值处理,最后利用大容量FIFO(先入先出单元)进行缓存;由于百兆网数据传输速率有限,利用FPGA设计吉比特光纤以太网传输特定格式报文,把电流数据传输至电力行波测距装置;解决了积分电路由于运放输入偏置电压带来的积分饱和问题,以及高速ADC输入量程小于输入信号幅值等技术难点;试验结果表明,高频信号采集及传输方案能够满足行波测距装置百米级别的测距精度要求,具有一定工程应用价值。     

不同前驱体溶液制备BiFeO3薄膜的晶体结构及电学性质研究

BiFeO3 是技术上广泛应用的极为重要的一类多铁性材料.本文采用sol-gel法,在ITO基底上分别采用乙酸和硝酸为溶剂制备纯相BiFeO3薄膜.XRD、电滞回线与介电性分析表明,在退火温度为600℃时,两种溶液均能制备出BiFeO3晶体,相比之下,利用乙酸制备BiFeO3比较容易,且铁电性好.     

脉冲X射线剂量率测量不确定度分析

“强光一号”短脉冲高能X射线剂量率测量,主要包括脉冲射线总剂量与脉冲射线时间宽度的测量,前者采用热释光剂量计测量,后者采用PIN半导体探测器记录。根据不确定度传递数学模型,分析了影响X射线剂量和脉冲宽度测量结果的因素。针对“强光一号”短脉冲高能X射线测量,定量地给出了各种因素引入的测量不确定度,总剂量测量是影响剂量率测量准确性的决定性因素,其相对标准不确定度为25.1％,脉冲宽度测量不确定度为3.7％,剂量率测量扩展不确定度为50.8%,置信概率95%。     

Effect of defect configuration on the localization of phonons in two-dimensional phononic crystals

Effects of defect location on the defect frequency and the localization of phonons are investigated in two novel kinds of model, created by moving the location of the native cylinder and inserting an ad-cylinder in the central cellular respectively. The results show that the defect frequency in Model 1 is only related to the distance, while in Model 2, is related not only to the distance, but also to the moving direction. From the pressure distribution, obvious localization phenomenon is found. The position and shape of the localized energy are varied with the position of the defect.     

Graphene-based passively Q-switched Nd:KLu(WO4)2 eye-safe laser operating at 1,425 nm

With graphene as saturable absorber, an Nd:KLu(WO₄)₂ eye-safe laser operating at 1,425 nm is demonstrated. To the best of our knowledge, this is the first demonstration that an Nd:KLu(WO₄)₂ laser operates at the eye-safe 1.4-μm region. A maximum total average output power of 170 mW is obtained under the pump power of 9.6 W, corresponding to an optical–optical efficiency of 1.77 %. The minimum pulse width and the highest pulse repetition rate are 153 ns and 97 kHz, respectively. Also the characteristics of the graphene used as saturable absorber for a 1.4-μm laser were studied for the first time.     

氢离子对血红蛋白-氧亲和力影响的拉曼光谱研究

静脉采血,分离并制备血红蛋白溶液,用拉曼光谱方法观察不同pH时H+对血红蛋白-氧结合状态与能力的影响。结果显示:在514.5nm激光的激发下,当pH为7.4时,随着氧分压降低,血红蛋白在1 375,1 562,1 585和1 638cm-1峰强均逐渐减弱,其中以1 375和1 638cm-1峰渐变最明显且相关性显著。以氧分压为横坐标,拉曼峰强为纵坐标,对pH为5.7,7.4和8.0时的血红蛋白在1 375和1 638cm-1峰的强度及其氧分压进行线性拟合,结果显示2处的拟合效果均良好,拉曼峰强度/氧分压的斜率关系表现为K8.0>K7.4>K5.7,表明pH越低血红蛋白的氧亲和力越低,越有利于向组织释放氧气。研究表明,应用拉曼光谱技术可检测血红蛋白与氧的亲和力,通过对血红蛋白-氧亲和力的量化检测,可以观察pH对血氧结合状态的影响,为血氧分压的监测以及氢离子和二氧化碳等血氧亲和力调节因子调节能力的研究提供新的研究方法与理论基础。