Carbon film electrodes for oxidase-based enzyme sensors in food analysis

Carbon film resistor electrodes have been evaluated as transducers for the development of multiple oxidase-based enzyme electrode biosensors. The resistor electrodes were first modified with Prussian Blue (PB) and then covered by a layer of covalently immobilized enzyme. Electrochemical impedance spectroscopy was used to characterize the interfacial behaviour of the Prussian Blue modified and enzyme electrodes; the spectra demonstrated that the access of the substrates is essentially unaltered by application of the enzyme layer. These enzyme electrodes were used to detect the substrate of the oxidase (glucose, ethanol, lactate, glutamate) via reduction of hydrogen peroxide at +50 mV versus Ag/AgCl in the low micromolar range. Response times were 1-2 min. Finally, the glucose, ethanol and lactate electrochemical biosensors were used to analyse complex food matrices—must, wine and yoghurt. Data obtained by the single standard addition method were compared with a spectrophotometric reference method and showed good correlation, indicating that the electrodes are suitable for food analysis.     

A critical review on analytical methods and characterization of butyl and bromobutyl rubber

The molecular structure characterization of butyl and bromobutyl rubber (BIIR) requires the definition of three main parameters: (I) the unsaturation degree of the rubbers, (II) the total bromine content of the BIIRs, and (III) the functional bromine content of the BIIRs. The analytical methods for the determination of the previously mentioned parameters have been described and critically examined in this review.     

Stereoselective Synthesis of Methoxy Substituted 2, 3-Dibenzylbutyrolactones Via Organic Phosphonates

A highly convergent, short and stereoselective synthesis of a series of methoxy substituted 2, 3-dibenzylbutyrolactones was achieved using a Horner-Wadsworth-Emmons (HWE) reaction as the key step in overall yields above 32%.     

Working group report: Heavy-ion physics and quark-gluon plasma

This is the report of Heavy Ion Physics and Quark-Gluon Plasma at WHEPP-09 which was part of Working Group-4. Discussion and work on some aspects of quark-gluon plasma believed to have created in heavy-ion collisions and in early Universe are reported.     

Simultaneous quantitation of IC87114, roflumilast and its active metabolite roflumilast N‐oxide in plasma by LC‐MS/MS: application for a pharmacokinetic study

A sensitive and reliable high‐performance liquid chromatography–mass spectrometry (LC–MS/MS) was developed and validated for simultaneous quantification IC87114, roflumilast (RFM), and its active metabolite roflumilast N‐oxide (RFN) using tolbutamide as an internal standard. The analytes were extracted by using liquid–liquid extraction and separated on a reverse phase C₁₈ column (50 mm × 3 mm i.d., 4.6 µ) using methanol: 2 mM ammonium acetate buffer, pH 4.0 as mobile phase at a flow rate 1 mL/min in gradient mode. Selective reaction monitoring was performed using the transitions m/z 398.3 > 145.9, 403.1 >186.9, 419.1 > 187.0 and 271.1 > 155.0 to quantify quantification IC87114, RFM, RFN and tolbutamide, respectively. The method was validated over the concentration range of 0.1–60 ng.mL^?1 for RFM and RFN and 6 to 2980 ng.mL^?1 for IC87114. Intra‐ and inter‐day accuracy and precision of validated method were within the acceptable limits of <15% at all concentrations. Coefficients of correlation (r²) for the calibration curves were >0.99 for all analytes. The quantitation method was successfully applied for simultaneous estimation of IC87114, RFM and RFN in a pharmacokinetic drug–drug interaction study in Wistar rats. Copyright © 2012 John Wiley & Sons, Ltd.     

Discussion on a possible neutrino detector located in India

We have identified some important and worthwhile physics opportunities with a possible neutrino detector located in India. Particular emphasis is placed on the geographical advantage with a stress on the complimentary aspects with respect to other neutrino detectors already in operation.     

Neutral loss and precursor ion scan tandem mass spectrometry for study of activated benzopyrene-DNA adducts

Methodology for detection of activated benzo[a]pyrene (B[a]P)–nucleoside adducts by liquid chromatography–tandem mass spectrometry is reported. Adducts of B[a]P-dihydrodiol epoxide (B[a]PDE) with guanosine and adenosine have been detected for the first time by use of precursor ion scan and neutral loss scan. B[a]P was then activated by use of UV irradiation and some of the products obtained have been identified by taking advantage of the information obtained for B[a]PDE. Photoactivation has also been carried out in the presence of hydrogen peroxide; this resulted in a higher yield of products with increased production of BaP diones. The reactivity of these compounds toward nucleosides has been tested. The proposed method was successfully used for detection of one stable guanosine–B[a]P dione adduct.     

New 3,4-seco-ent-kaurene dimers from Croton micans

From the stems of Croton micans Sw., five new 3,4-seco-ent-kaurene dimers: micansinoic acid (1), isomicansinoic acid (2), and the dimethyl (3), monomethyl (4) and monoethyl ester (5) of micansinoic acid were isolated. The structures of the new compounds were elucidated by spectroscopic data interpretation, mainly 1D and 2D NMR experiments and MS. These compounds are the first 3,4-seco-ent-kaurene dimers from a Croton species.     

Limitations in the analytical use of invertase inhibition for the screening of trace mercury content in environmental samples.

The possibility of screening the mercury(II) content in real environmental samples based on inhibition of the activity of dissolved invertase has been examined. The extent of inhibition was measured with an amperometric glucose biosensor with glucose oxidase immobilized on a membrane. Data concerning the stability and reproducibility of measurements are provided. The effects of heavy metals on the inhibition of invertase, together with that of common anions such as chloride, nitrate and sulfate are reported. The determination of mercury using this procedure has been carried out in samples of natural and waste water samples of various origins already analyzed by ICP-AES, by spiking ppb levels of mercury(II). Differences in the inhibiting effect of the samples and in the recoveries were found and are discussed.