Pressurized-liquid extraction for determination of illicit drugs in hair by LC–MS–MS

An LC–MS–MS-based procedure for determination in hair of 14 different drugs of abuse belonging to the classes cocaine, amphetamine-like compounds, opiates, and hallucinogens has been developed. A pressurized-liquid extraction procedure was used and proved useful for quantitative recovery of all the analytes tested. This procedure, in conjunction with a simple decontamination step, performed to avoid false-positive samples, enabled the detection of all the analytes with LOQ ranging from 1.8 to 16 pg mg^?1 and accuracy varying from 85 to 111 %. The procedure was validated in accordance with the SOFT/AAFS guidelines and seems to be suitable for routine determination of the drugs tested in hair.     

Simulation model for anomalous precession of the perihelion of mercury's orbit

The ‘anomalous perihelion precession’ of Mercury, announced by Le Verrier in 1859, was a highly controversial topic for more than half a century and invoked many alternative theories until 1916, when Einstein presented his theory of general relativity as an alternative theory of gravitation and showed perihelion precession to be one of its potential manifestations. As perihelion precession was a directly derived result of the full General Theory and not just the Equivalence Principle, Einstein viewed it as the most critical test of his theory. This paper presents the computed value of the anomalous perihelion precession of Mercury's orbit using a new relativistic simulation model that employs a simple transformation factor for mass and time, proposed in an earlier paper. This computed value compares well with the prediction of general relativity and is, also, in complete agreement with the observed value within its range of uncertainty. No general relativistic equations have been used for computing the results presented in this paper.     

Chemical composition of the essential oil of Croton gossypiifolius from Venezuela

The essential oil from leaves of Croton gossypiifolius Vahl. (Euphorbiaceae) was obtained by hydrodistillation, and analyzed by GC/FID and GC/MS. The constituents were identified by their mass spectra and Kovats' indices. Fifty-one compounds accounting for 92% of the oil were detected, and 47 of them were identified. The oil was dominated by oxygenated sesquiterpenes with the major presence of alpha-cedrene oxide (18.6%), spathulenol (16.3%), valencene (5.8%), geranyl-pentanoate (5.3%), alpha-cadinol (4.0%), germacrene D (3.5%) and longifolene (3.3%).     

STUDIES ON THE FRAGMENTATION OF DIALKYL DISULFIDES UPON ELECTRON IMPACT

Abstract

Recent studies on the fragmentation of some organic disulfides upon electron impact in a mass spectrometer have shown two main decomposition routes besides simple bond disconnection: skeletal rearrangements^1–3 and proton transfer⁴. Transposition of the molecular components takes place via loss of one or two sulfur atoms while the carbon skeleton is preserved. Such molecular rearrangements are particularly noticeable in small molecules like dimethyl disulfide. Larger systems show a different fragmentation pattern in which proton transfer to give alkyl hydro-disulfides becomes predominant. The transfer of protons has been shown to proceed by way of intramolecular 1,2 and 1,3 hydrogen shifts from α and β carbons respectively by means of selective deuterium labbeling of diethyl disulfide.⁴     

Determining pirimiphos-methyl in durum wheat samples using an acetylcholinesterase inhibition assay

An electrochemical assay used for detecting acetylcholinesterase (AChE) inhibitors has been optimised to detect pirimiphos-methyl in durum wheat. Pirimiphos-methyl is a phosphothionate insecticide and so it needs to be transformed into the corresponding oxo form to act as an effective AChE inhibitor. The inhibition assay was based on the electrochemical detection of the product of AChE, choline, via choline oxidase biosensors obtained with Prussian-Blue modified screen printed electrodes. The procedure for the oxidation of pirimiphos methyl via N-bromosuccinimide (NBS) and AChE inhibition was optimised for reagent concentrations and inhibition time in a buffer solution. A calibration of the pirimiphos-methyl (25–1,000 ng/ml) was obtained in the buffer. The intra-electrode CV ranged between 1.6 and 15.0, whereas the inter-electrode CV ranged between 4.6 and 16.0. The detection limit (LOD) was 38 ng/ml, and the I_50% was 360 ng/ml. The assay conditions were then re-optimised to work with durum wheat extracts, and the calibrations were obtained under different experimental conditions, such as sample pretreatment (milled or whole grains) and extract concentration. The calibrations were slightly affected by the sample matrix, resulting in an increased LOD (65–133 ng/ml) and I_50% (640–1,650 ng/ml). The LOD found for the sample, determined under optimal conditions, was 3 mg/kg. Spiked samples were prepared at the EU regulated level (5 mg/kg) and analysed with the optimised protocol, resulting in an average recovery of 70.3%.     

Glucose oxidase/hexokinase electrode for the determination of ATP

A hydrogen peroxide based enzyme electrode for the determination of ATP has been developed by the immobilization of glucose oxidase and hexokinase. Competition between the enzymes for the substrate glucose allowed the measurement of ATP. Different immobilization procedures and different types of hexokinase have been tested. Using a BSA-glutaraldehyde procedure and hexokinase from an overproducing strain of bakers' yeast, ATP was measured in the 0.05–0.5 mmol l⁻¹ range with a detection limit of 0.01 mmol l⁻¹. ATP concentrations comparable to those reported in the literature and a good recovery were obtained when the enzyme electrode was used with human erythrocyte hemolysate.     

Amperometric lysine bioprobes analysis in feeds

Amperometric enzyme electrode probes have been constructed for the specific determination of L-lysine and used in batch and flow analysis. The enzyme lysine oxidase was immobilized on a preactivated polymer support which was placed on a platinum electrode. Additional blocking membranes conferred high stability, reproducibility and avoided electrochemical and enzyme interferences. Parameters including pH, temperature, storage and operational times were optimized. Lysine was determined in the range 10(-6)-2.10(-3)M with a detection limit of 5 x 10(-7)M. The Michaelis constant was 2 x 10(-3)M. This value was approximately two order of magnitudes higher than that reported in literature for the free enzyme. The response time of the probe was about 2 min in batch and flow analysis and 30 sec in flow injection analysis (FIA). The resulting probes were stable for more than three months with more than 300 analyses performed. The determination of lysine was carried out by both flow-through analysis and FIA. Analysis in feeds was carried out by acid hydrolysis to liberate lysine; then the solution was analyzed by the bioprobe and HPLC procedures. Results by the two methods correlated well.     

Micro-solid phase extraction coupled with high-performance liquid chromatography-tandem mass spectrometry for the determination of stimulants, hallucinogens, ketamine and phencyclidine in oral fluids

A confirmatory method for the determination of illicit drugs based on micro-solid phase extraction with modified tips, made of a functionalized fiberglass with apolar chains of octadecylsilane into monolithic structure, has been developed in this study. Drugs belonging to different chemical classes, such as amphetamine, methamphetamine, methylenedioxyamphetamine, methylenedioxyethylamphetamine, methylenedioxymethylamphetamine, cocaine, benzoylecgonine, ketamine, mescaline, phencyclidine and psilocybine were analyzed. The quantitation was performed by liquid chromatography-tandem mass spectrometry and the analytes were detected in positive ionization by means of an electrospray source. The limits of quantification ranged between 0.3 ng mL⁻¹ for cocaine and 4.9 ng mL⁻¹ for psilocybine, with coefficients of determination (r²) >0.99 for all the analytes as recommended in the guidelines of Society of Forensic Toxicologists-American Association Forensic Sciences.     

Press‐Printed Conductive Carbon Black Nanoparticle Films for Molecular Detection at the Microscale

Carbon black nanoparticle (CBNP) press‐transferred film‐based transducers for the molecular detection at the microscale level were proposed for the first time. Current‐sensing atomic force microscopy (CS‐AFM) revealed that the CBNP films were effectively press‐transferred, retaining their good conductivity. A significant correlation between the morphology and the resistance was observed. The highest resistance was localized at the top of the press‐transferred film protrusions, whereas low values are usually obtained at the deep crevices or grooves. The amount of press‐transferred CBNPs is the key parameter to obtain films with improved conductivity, which is in good agreement with the electrochemical response. In addition, the conductivity of such optimum films was not only Ohmic; in fact, tunneling/hopping contributions were observed, as assessed by CS‐AFM. The CBNP films acted as exclusive electrochemical transducers as evidenced by using two classes of molecules, that is, neurotransmitters and environmental organic contaminants. These results revealed the potential of these CBNP press‐transferred films for providing new options in microfluidics and other related micro‐ and nanochemistry applications.     

Simultaneous quantitation of IC87114, roflumilast and its active metabolite roflumilast N‐oxide in plasma by LC‐MS/MS: application for a pharmacokinetic study

A sensitive and reliable high‐performance liquid chromatography–mass spectrometry (LC–MS/MS) was developed and validated for simultaneous quantification IC87114, roflumilast (RFM), and its active metabolite roflumilast N‐oxide (RFN) using tolbutamide as an internal standard. The analytes were extracted by using liquid–liquid extraction and separated on a reverse phase C₁₈ column (50 mm × 3 mm i.d., 4.6 µ) using methanol: 2 mM ammonium acetate buffer, pH 4.0 as mobile phase at a flow rate 1 mL/min in gradient mode. Selective reaction monitoring was performed using the transitions m/z 398.3 > 145.9, 403.1 >186.9, 419.1 > 187.0 and 271.1 > 155.0 to quantify quantification IC87114, RFM, RFN and tolbutamide, respectively. The method was validated over the concentration range of 0.1–60 ng.mL^?1 for RFM and RFN and 6 to 2980 ng.mL^?1 for IC87114. Intra‐ and inter‐day accuracy and precision of validated method were within the acceptable limits of <15% at all concentrations. Coefficients of correlation (r²) for the calibration curves were >0.99 for all analytes. The quantitation method was successfully applied for simultaneous estimation of IC87114, RFM and RFN in a pharmacokinetic drug–drug interaction study in Wistar rats. Copyright © 2012 John Wiley & Sons, Ltd.