Numerical vibroacoustic analysis of plates with constrained-layer damping patches

A numerical vibroacoustic model that can manage multilayered plates locally covered with damping patches is presented. All the layers can have an on-axis orthotropic viscoelastic behavior. Continuity of displacements and transverse shear stresses at each interface is enforced, which permits to write the entire displacement field in function of the displacements of the--common--first layer, leading to a two-dimensional plate model. The problem is then discretized by Rayleigh-Ritz's method using a trigonometric basis that includes both sine and cosine functions in order to treat various boundary conditions. The excitation can be of mechanical kind (concentrated or distributed forces) or of acoustic kind (plane wave of any incidence, diffuse field, etc.). The model permits to compute different vibroacoustic indicators: the mean square velocity of the plate, the radiation efficiency, and the transmission loss. Comparisons between the present model and numerical results from literature or finite element computations show that the model gives good results in both mechanical and acoustical aspects. Then, a comparison of the effects of different distributions of patches is presented. The role of the surface covering rate is first discussed, followed by a study involving different geometries for the same surface covering rate.     

Des extensions sextiques de ℚ de clôture galoisienne engendrée par deux corps cubiques linéairement disjoints

Sans résumé     

Dairy aroma compounds recovery by pervaporation

Original pervaporation experiments with two dairy aroma compounds diluted in model aqueous solutions through GFT silicalite-filled silicone composite membrane and GKSS PEBA homogeneous membrane (0.1 m² effective area) were carried out on a pilot-plant. A systematic approach was done, studying the influence of various operating parameters (feed temperature and permeate pressure). The permeabilities of the membranes were calculated for each permeant, based on the estimation of the driving force as a fugacities difference. The pervaporation membranes tested showed a good selectivity for the extraction of methylthiobutanoate (hydrophobic molecule with cheese fragrance) at high dilution rate. However, these membranes proved to be less selective for the recovery of diacetyl (hydrophilic butter aroma). For this component, the coupling of pervaporation and two-stage condensation improved significantly the selectivity of the whole process. The thermodynamic properties in the liquid feed (real dairy media) as well as in the permeate (vapour-liquid equilibria at low pressure) have to be well known in order to optimize the recovery of the aroma compounds     

Bipolar Electrochemiluminescence Imaging: A Way to Investigate the Passivation of Silicon Surfaces

This work depicts the original combination of electrochemiluminescence (ECL) and bipolar electrochemistry (BPE) to map in real-time the oxidation of silicon in microchannels. We fabricated model silicon-PDMS microfluidic chips, optionally containing a restriction, and monitored the evolution of the surface reactivity using ECL. BPE was used to remotely promote ECL at the silicon surface inside microfluidic channels. The effects of the fluidic design, the applied potential and the resistance of the channel (controlled by the fluidic configuration) on the silicon polarization and oxide formation were investigated. A potential difference down to 6 V was sufficient to induce ECL, which is two orders of magnitude less than in classical BPE configurations. Increasing the resistance of the channel led to an increase in the current passing through the silicon and boosted the intensity of ECL signals. Finally, the possibility of achieving electrochemical reactions at predetermined locations on the microfluidic chip was investigated using a patterning of the silicon oxide surface by etched micrometric squares. This ECL imaging approach opens exciting perspectives for the precise understanding and implementation of electrochemical functionalization on passivating materials. In addition, it may help the development and the design of fully integrated microfluidic biochips paving the way for development of original bioanalytical applications.     

Nuclear field shift effect in isotope fractionation of thallium

Environmental transport of Tl is affected by redox reaction between Tl(I) and Tl(III) and ligand exchange reactions of them. In order to deepen the knowledge of Tl chemistry, we investigated fractionation of Tl stable isotopes (²⁰³Tl and ²⁰⁵Tl) in a chemical exchange system. Tl isotopes were fractionated in a liquid–liquid extraction system, in which aqueous and organic phases are hydrochloric acid solution and dichloroethane including a crown ether, respectively. After purification by ion-exchange chemistry, the isotope ratio of ²⁰⁵Tl/²⁰³Tl in equilibrated aqueous phase was measured precisely by multiple-collector–inductively-coupled-plasma–mass-spectrometry. A large isotope fractionation >1 ‰ was found. Electronic structures of possible Tl species (hydrated Tl⁺, Tl³⁺, and Tl chlorides) were calculated by ab initio methods, and the isotope fractionation factor was theoretically obtained. The isotope fractionation via intramolecular vibrations was calculated to be much smaller than the experimental result. The isotope fractionation via isotopic change in nuclear volume, named the nuclear field shift effect, was calculated to be >1 ‰ in Tl(I)–Tl(III) redox systems and/or ligand exchange systems of Tl(III). The nuclear field shift effect was found to be the major origin of Tl isotope fractionation.     

60]Fullerene-based monolayers as neuroprotective biocompatible hybrid materials

Here we report on the surface immobilization of redox-active [60]fullerene derivatives and the consequent neuroprotective effects toward l-glutamate induced excitotoxicity in human derived undifferentiated neuroblastoma cells.     

Natural superhydrophilicity and photocatalytic properties of sol-gel derived ZnTiO(3)-ilmenite/r-TiO(2) films

The additive free heteronucleation and nanocrystallization of ternary Zn(x)Ti(y)O(z) sols and coatings is presented. A proper adjustment of the Zn/Ti ratio in the sol allows the formation of elaborate superhydrophilic cubic spinel-like Zn(2)TiO(4), c-ZnTiO(3) or h-ZnTiO(3)-ilmentite/r-TiO(2)-rutile films. Their morphology and natural superhydrophilicity can be fine-tuned by the inclusion of 5% silica. This doping step delivers high dye intake capacities and water contact angle values below 3°. XPS analysis indicates that Zn and Si enrichment enables greater surface hydroxylation and thus improved water wetting behaviour. The transparent h-ZnTiO(3)-ilmenite/r-TiO(2) nanocomposite coatings deposited on glass and Si-wafers show a remarkable activity in the photomineralization of fatty-acids.     

Criteria to define the standard deviation for proficiency assessment for the determination of essential trace elements in serum: comparison of Z-scores based on the Horwitz function or on biological variability

A critical issue in the organisation of Proficiency Testing/External Quality Assessment Schemes is the definition of the criteria against which the performance of individual laboratories should be evaluated. Organisers of EQAS in Occupational and Environmental Laboratory Medicine (http://www.occupational-environmental-laboratory.com) collaborate to define common acceptable levels of performance. The aim of this study was to compare the Horwitz function to the Fraser’s approach. Sets of results obtained from the distribution of test materials in the Network schemes (for the measurands: copper, selenium or zinc in serum) were used to calculate Z-scores according to both approaches. Quality specifications derived from both approaches were also compared to the standard deviations obtained. Except for selenium, Horwitz criteria suggests a more stringent evaluation than Fraser criteria, the latter being very stringent as regard the participant analytical variability.