Generation and reactivity of bis(2,6-diethylphenyl)germanium(II)

The title intermediate ($\text{3a}$) is produced on photolysis of hexakis(2,6-diethyl-phenyl)cyclotrigermane ($\text{1}$) or bis(2,6-diethylphenyl)bis(trimethylsilyl)germane ($\text{4}$) as evidenced by trapping experiments, and thermally dimerizes to tetrakis(2,6-diethyl-phenyl)digermene ($\text{2a}$). Diarylgermylenes such as $\text{3a}$ do not form stable triethylamine adducts (e.g. $\text{5a}$) as has been previously reported.     

Critical evaluation of gas standards based on hydrogen

Summary Six commercial hydrogen standards containing helium, oxygen, nitrogen, methane and carbon dioxide at trace levels were analyzed by gas chromatography, for periods up to 105 days. The concentrations, in the range of 0–120 μmol mol⁻¹, were stable (with the exception of oxygen) but often significantly different from the certified values provided by the suppliers, especially for helium, oxygen and nitrogen. Concurrently, some experiments were carried out to verify the stability of gas mixtures based on hydrogen stored in cylinders submitted to different chemical and physical treatments. The causes that led to the deviations observed, as well as the decreases in oxygen, are discussed. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996.     

The spatial distribution of poly(methyloctylsiloxane) deposited by solvent evaporation in the pores of HPLC silica particles

Summary Poly(methyloctylsiloxane) (PMOS), sorbed into the pores of HPLC silica particles by solvent evaporation, can function as a useful stationary phase for reversed-phase chromatography. The present work addresses the question of how the PMOS is distributed in the pores. Measurements of the surface area (BET, N₂) of a series of partially loaded samples (0–40% PMOS, m/m) using a typical batch of HPLC silica (10 μm irregular particles with 6 nm pores) show that the specific surface area of the samples decreases linearly with the specific loading (mass of PMOS per gram of silica). This result is not consistent with a “film” model in which the PMOS is deposited uniformly on the pore walls, but is consistent with a model in which long segmented “plugs” of PMOS are deposited within the pore system. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Facile Tailoring of Structures for Controlled Release of Paracetamol from Sustainable Lignin Derived Platforms

Nowadays, sustainable materials are receiving significant attention due to the fact that they will be crucial for the development of the next generation of products and devices. In the present work, hydrogels have been successfully synthesized using lignin which is non-valorized biopolymer from the paper industry. Hydrogels were prepared via crosslinking with Poly(ethylene) glycol diglycidyl ether (PEGDGE). Different crosslinker ratios were used to determine their influence on the structural and chemical properties of the resulting hydrogels. It has been found that pore size was reduced by increasing crosslinker amount. The greater crosslinking density increased the swelling capacity of the hydrogels due to the presence of more hydrophilic groups in the hydrogel network. Paracetamol release test showed higher drug diffusion for hydrogels produced with a ratio lignin:PEGDGE 1:1. The obtained results demonstrate that the proposed approach is a promising route to utilize lignocellulose waste for producing porous materials for advanced biomedical applications in the pharmacy industry.     

Ozone etching of a highly asymmetric triblock copolymer with a majority polydiene component

The ozone etching of thin films of a commercial polystyrene-polyisoprene-polystyrene (PS-PI-PS) triblock copolymer (Vector 4111) was studied using atomic force microscopy (AFM) and ellipsometry. The major phase of the copolymer consists of PI (82 wt.%) and the copolymer forms a cylindrical structure upon annealing. Moderate ozone doses (1.4% wt/wt) were used to etch the copolymer. This revealed two stages of the ozonation: rapid etching of the PI fragments followed by slow compacting of the remaining PS cylinders. Under certain conditions ozone treatment results in the formation of nanosized grooves in a PS matrix which is suitable for lithographic processes.     

Determination of flavanol and procyanidin (by degree of polymerization 1-10) content of chocolate, cocoa liquors, powder(s), and cocoa flavanol extracts by normal phase high-performance liquid chromatography: collaborative study

An international collaborative study was conducted on an HPLC method with fluorescent detection (FLD) for the determination of flavanols and procyanidins in materials containing chocolate and cocoa. The sum of the oligomeric fractions with degree of polymerization 1-10 was the determined content value. Sample materials included dark and milk chocolates, cocoa powder, cocoa liquors, and cocoa extracts. The content ranged from approximately 2 to 500 mg/g (defatted basis). Thirteen laboratories representing commercial, industrial, and academic institutions in six countries participated in the study. Fourteen samples were sent as blind duplicates to the collaborators. Results from 12 laboratories yielded repeatability relative standard deviation (RSDr) values that were below 10% for all materials analyzed, ranging from 4.17 to 9.61%. The reproducibility relative standard deviation (RSD(R)) values ranged from 5.03 to 12.9% for samples containing 8.07 to 484.7 mg/g. In one sample containing a low content of flavanols and procyanidins (approximately 2 mg/g), the RSD(R) was 17.68%. Based on these results, the method is recommended for Official First Action for the determination of flavanols and procyanidins in chocolate, cocoa liquors, powder(s), and cocoa extracts.     

A general electron transfer reduction of lactones using SmI2-H2O

Herein we describe a strategy for the selective, electron transfer reduction of lactones of all ring sizes and topologies using SmI(2)-H(2)O and a Lewis base to tune the redox properties of the complex. The current protocol permits instantaneous reduction of lactones to the corresponding diols in excellent yields, under mild reaction conditions and with useful chemoselectivity. We demonstrate the broad utility of this transformation through the reduction of complex lactones and sensitive drug-like molecules. Sequential electron transfer reactions and syntheses of deuterated diols are also described.     

Novel Semi-Synthetic Cu (II)–Cardamonin Complex Exerts Potent Anticancer Activity against Triple-Negative Breast and Pancreatic Cancer Cells via Inhibition of the Akt Signaling Pathway

Cardamonin is a polyphenolic natural product that has been shown to possess cytotoxic activity against a variety of cancer cell lines. We previously reported the semi-synthesis of a novel Cu (II)–cardamonin complex (19) that demonstrated potent antitumour activity. In this study, we further investigated the bioactivity of 19 against MDA-MB-468 and PANC-1 cancer cells in an attempt to discover an effective treatment for triple-negative breast cancer (TNBC) and pancreatic cancer, respectively. Results revealed that 19 abolished the formation of MDA-MB-468 and PANC-1 colonies, exerted growth-inhibitory activity, and inhibited cancer cell migration. Further mechanistic studies showed that 19 induced DNA damage resulting in gap 2 (G2)/mitosis (M) phase arrest and microtubule network disruption. Moreover, 19 generated reactive oxygen species (ROS) that may contribute to induction of apoptosis, corroborated by activation of caspase-3/7, PARP cleavage, and downregulation of Mcl-1. Complex 19 also decreased the expression levels of p-Akt and p-4EBP1, which indicates that the compound exerts its activity, at least in part, via inhibition of Akt signalling. Furthermore, 19 decreased the expression of c-Myc in PANC-1 cells only, which suggests that it may exert its bioactivity via multiple mechanisms of action. These results demonstrate the potential of 19 as a therapeutic agent for TNBC and pancreatic cancer.