Bronsted acid-promoted olefin aziridination and formal anti-aminohydroxylation

A straightforward synthesis of aziridines is reported from an electron-rich azide (alkyl or aryl azide), electron-deficient olefin, and triflic acid in cold acetonitrile. The only coproduct of the reaction is dinitrogen (N2). Active ester substrates bearing a nucleophilic carbonyl engage the putative protonated aziridine intermediate to produce the product of olefin aminohydroxylation in which the nitrogen is benzyl protected and the oxygen is acylated. The possibility that a triazoline need not be an intermediate in aziridine production is advanced.     

Zur Synthese sulfonierter Derivate von 4-Amino-1,3-dimethylbenzol und 2-Amino-1,3-dimethylbenzol

Syntheses of Sulfonated Derivatives of 4-Amino-1, 3-dimethylbenzene and 2-Amino-1, 3-dimethylbenzene Direct sulfonation of 4-amino-1, 3-dimethylbenzene (1) and sulfonation of 4-nitro-1,3-dimethylbenzene ( 4 ) to 4-nitro-1,3-dimethylbenzene-6-sulfonic acid ( 3 ) followed by reduction yield 4-amino-1,3-dimethylbenzene-6-sulfonic acid ( 2 ). The isomeric 5-sulfonic acid ( 5 ) however is prepared solely by baking the acid sulfate salt of 1 . Reaction of sulfur dioxide with the diazonium chloride derived from 2-amino-4-nitro-1,3-dimethylbenzene ( 7 ) leads to 4-nitro-1,3-dimethylbenzene-2-sulfonyl chloride ( 8 ), which is successively hydrolyzed to 4-nitro-1,3-dimethylbenzene-2-sulfonic acid ( 9 ) and reduced to 4-amino-1, 3-dimethylbenzene-2-sulfonic acid ( 6 ). Treatment of 4-amino-6-bromo-1,3-dimethylbenzene ( 12 ) and 4-amino-6-chloro-1, 3-dimethylbenzene ( 13 ), the former obtained by reduction of 4-chloro-6-nitro-1,3-dimethyl-benzene ( 10 ) and the latter from 4-chloro-6-nitro-1, 3-dimethylbenzene ( 11 ), with oleum yield 4-amino-6-bromo-1,3-dimethylbenzene-2-sulfonic acid ( 14 ) and 4-amino-6-chloro-1,3-dimethylbenzene-2-sulfonic acid ( 15 ) respectively; subsequent carbon-halogen hydrogenolyses of 14 and 15 lead also to 6 (Scheme 1). Baking the acid sulfate salt of 2-amino-1, 3-dimethylbenzene ( 17 ) gives 2-amino-1, 3-dimethylbenzene-5-sulfonic acid ( 16 ), whereas the isomeric 4-sulfonic acid ( 18 ) can be prepared by either of the following three possible pathways: Sulfonation of 2-nitro-1,3-dimethylbenzene ( 20 ) to 2-nitro-1,3-dimethylbenzene-4-sulfonic acid ( 21 ) followed by reduction or sulfonation of 2-acetylamino-1,3-dimethylbenzene ( 19 ) to 2-acetylamino-1,3-dimethylbenzene-4-sulfonic acid ( 22 ) with subsequent hydrolysis or direct sulfonation of 17 . Further sulfonation of 18 yields 2-amino 1,3-dimethylbenzene-4,6-disulfonic acid ( 23 ), the structure of which is independently confirmed by reduction of unequivocally prepared 2-nitro- 1,:3-dimethylbenzene-4,6-disulfonic acid ( 24 )(Scheme 2).     

Reaction of tris(trimethylsilyl)methylsilicon halides with methanolic sodium methoxide. Probability of sila-olefin intermediates

The compounds TsiSiR₂X [Tsi = Me₃Si)₃C; R = Me, X = Cl, Br, I, or R = Ph, X = F, Cl, Br, I)] react with boiling 2 M MeONa-MeOH to give products of the type (Me₃Si)₂CHSiR₂OMe. It is suggested that the reaction proceeds through an elimination, analogous to E2 eliminations of alkyl halides, involving synchronous attack of MeO^? at an Me₃Si group, liberation of X^?, and formation of (Me₃Si)₂CSiR₂. The compounds TsiSiPhMeF TsiSiPhCl₂ react analogously to give (Me₃Si)₂CHSiPhMe(OMe) and (Me₃Si)₂CHSiPh(OMe)₂ [tha latter presumably by solvolysis of the initially-formed (Me₃Si)₂CHSiPhCl(OMe)]. The compounds TsiSiMe₂OMe and TsiSiMe₃ do not react, while TsiSiMe₂H gives TsiH. The compound TsiSiCl₃ reacts with 0.1 M MeONa-MeOH to give the substitution and elmination products TsiSiCl₂(OMe) and (Me₃Si)₂CHSi(OMe)₃ in ca. $\text{1}\text{2}$ ratio.     

Photoreduction of Triplet Benzophenone by Tertiary Amines: Amine molecular structure and ketyl radical yield

The photoreduction of triplet benzophenone by 14 tertiary amines was investigated. The ketyl radical yields do not correlate with the quenching rate constants, nor with the electron donor propensity of the amines. Individual structural features of the amines seem to determine the photoreduction yields.     

Structural changes in the monomeric despentapeptide (B30-B26) insulin crystal

Insulin modified by the removal of its 5 B chain C terminal residues is monomeric but remains substantially potent. The crystal structures of the beef and insulin (dpi) with two molecules in the asymmetric unit has been determined by x-ray analysis. The 3-dimensional structure ofdpi proves to be generally similar to that of native molecule in 2Zn insulin. More detailed comparison reveals that the slight differences in the two independent molecules of beefdpi are distributed uniformly throughout the structure in contrast to insulin in 2Zn insulin, where the structural changes are concentrated in specific regions. The loss of symmetry in thedpi crystal appears to be the inability of the A9 serine to pack effectively in the C2 cell. The efficient packing of the sheepdpi molecule whose crystal structure has also been determined and where A9 is glycine supports this conclusion.     

A review of proton transfer reactions between various carbon-acids and amine bases in aprotic solvents

The subject of proton transfer between carbon acids and nitrogen bases in aprotic solvents is reviewed. Equilibrium and rate constants that characterize such reactions are most often determined utilizing UV-visible spectrophotometry. At ambient temperature reaction rates are sufficiently rapid that fast reaction methods, for example, the stopped-flow and temperature-jump techniques are required in many cases. Variation of the properties of the donor and acceptor reaction pairs enables electronic and steric effects upon thermodynamic and kinetic parameters of proton transfer to be assessed. Determination of the kinetic isotope effect (KIE), i.e. k(protium)/k(deuterium) led to the conclusion that, under certain circumstances and when the KIE is greater than seven, the proton undergoes reaction with a significant degree of quantum mechanical tunneling, consistent with a theoretical prediction advanced several decades earlier. In fact this aspect may be one of the most significant outgrowths of these studies. Many reactions have been characterized (by tunneling) but rarely are the reacting systems experimentally amenable to obtaining all the experimental criteria that support tunneling. Controversy that has arisen regarding treatment of experimental data and resulting conclusions from them is visited in this review. The structural nature of the product state of reaction is formulated based on spectroscopic evidence, in favorable cases, and probable structures of the transition state can be inferred.     

Some reactions of tetrafluoroethylene oligomers

As part of a programme to prepare and evaluate a series of perfluoro- chemicals for use as inert fluids, the fluorinations of some tetrafluoroethylene oligomers over cobalt (III) fluoride have been studied.Fluorination of perfluoro-3,4-dimethylhex-3-ene (tetramer) and perfluoro-4-ethyl-3,4-dimethylhex-2-ene (pentamer) over CoF₃ at 230°C and l45°C respectively afforded the corresponding saturated fluorocarbons however, at 250°C, pentamer gave predominantly the saturated tetramer. The thermal behaviour of these saturated fluorocarbons alone and in the presence of bromine and toluene has been studied.Pyrolysis of pentamer over glass beads at 500°C gave perfluoro-1,2,3- trimethylcyclobutene and isomers of perfluoro-2,3-dimethylpenta-1,3- diene. Under similar conditions perfluoro-2-(1-ethyl-1-methylpropyl). 3-methylpent-1-ene (hexamer) gave perfluoro-1-methyl-2-(1-methyl- propyl)-cyclobut-1-ene and perfluoro-2-methyl-3-(1-methylpropyl)-buta- 1,3-diene.These reactions and the structural elucidation of the products will be discussed.     

Modeling Organic Surfaces with Self-Assembled Monolayers

The interfacial properties of organic materials are of critical importance in many applications, especially the control of wettability, adhesion, tribology, and corrosion. The relationships between the microscopic structure of an organic surface and its macroscopic physical properties are, however, only poorly understood. This short review presents a model system that has the ease of preparation and the structural definition required to provide a firm understanding of interfacial phenomena. Long-chain thiols, HS(CH₂)_nX, adsorb from solution onto gold and form densely packed, oriented monolayers. By varying the terminal functional group, X, of the thiol, organic surfaces can be created having a wide range of structures and properties. More complex systems can be constructed by coadsorbing two or more thiols with different terminal functional groups or with different chain lengths onto a common gold substrate. By these techniques, controlled degrees of disorder can be introduced into model surfaces. We have used these systems to explore the relationships between the microscopic structure of the monolayers on a molecular and supramolecutar scale and their macroscopic properties. Wettability is a macroscopic interfacial property that has proven of particular interest.     

Optimization of an electrolytic conductivity detector for determination of toxic nitrogen-containing food contaminants separated by open tubular column gas chromatography

The combination of open tubular column gas chromatography with electrolytic conductivity detection has been evaluated for the determination of nitrogen-containing pesticide residues in food extracts. Optimization of the column position at the column-detector interface was crucial to the successful operation of the detector. The signal-to-noise ratio and response stability of the detector are greatly influenced by the composition of the electrolyte solvent. Large volume splitless injections using retention gaps and optimized detector operating conditions enabled pesticide residues in food extracts to be determined at sub parts-per-million levels. Although the electrolytic conductivity detector is less sensitive than the thermionic ionization detector, its greater nitrogen selectivity can he crucial to the determination of nitrogen-containing contaminants in food extracts, particularly in complex mixtures where phosphorus-containing contaminants or matrix compounds are also present.     

Chromatographic and spectroscopic methods for the determination of solvent properties of room temperature ionic liquids

Room temperature ionic liquids are novel solvents with favorable environmental and technical features. Synthetic routes to over 200 room temperature ionic liquids are known but for most ionic liquids physicochemical data are generally lacking or incomplete. Chromatographic and spectroscopic methods afford suitable tools for the study of solvation properties under conditions that approximate infinite dilution. Gas-liquid chromatography is suitable for the determination of gas-liquid partition coefficients and activity coefficients as well as thermodynamic constants derived from either of these parameters and their variation with temperature. The solvation parameter model can be used to define the contribution from individual intermolecular interactions to the gas-liquid partition coefficient. Application of chemometric procedures to a large database of system constants for ionic liquids indicates their unique solvent properties: low cohesion for ionic liquids with weakly associated ions compared with non-ionic liquids of similar polarity; greater hydrogen-bond basicity than typical polar non-ionic solvents; and a range of dipolarity/polarizability that encompasses the same range as occupied by the most polar non-ionic liquids. These properties can be crudely related to ion structures but further work is required to develop a comprehensive approach for the design of ionic liquids for specific applications. Data for liquid-liquid partition coefficients is scarce by comparison with gas-liquid partition coefficients. Preliminary studies indicate the possibility of using the solvation parameter model for interpretation of liquid-liquid partition coefficients determined by shake-flask procedures as well as the feasibility of using liquid-liquid chromatography for the convenient and rapid determination of liquid-liquid partition coefficients. Spectroscopic measurements of solvatochromic and fluorescent probe molecules in room temperature ionic liquids provide insights into solvent intermolecular interactions although interpretation of the different and generally uncorrelated "polarity" scales is sometimes ambiguous. All evidence points to the ionic liquids as a unique class of polar solvents suitable for technical development. In terms of designer solvents, however, further work is needed to fill the gaps in our knowledge of the relationship between ion structures and physicochemical properties.