A simplified synthesis of the hexamethylplatinate(IV) ion

Tetra-n-butylammonium hexachloroplatinate (IV) reacts with lithium methyl/lithium iodide in ether to give a solution containing lithium hexamethylplatinate (IV). With lithium methyl/lithium bromide in ether however, tetrabutylammonium hexamethylplatinate (IV) is precipitated together with lithium halides. Solid [Bu₄N)₂[Pt(Ch₃)₆] is stable under nitrogen at room temperature, but ether solutions of [Pt(Ch₃)₆]^2- decompose in a few minutes at room temperature in the absence of excess lithium methyl.     

Figures of merit of pneumatic and ultrasonic sample introduction systems in inductively coupled plasma–multichannel-based emission spectrometry in an ultra-clean environment

Conventional figures of merit such as limits of detection, signal to background ratio or repeatability, are used to determine the performance of pneumatic and ultrasonic sample introduction systems in an ultra-clean environment with an axially viewed inductively coupled plasma-atomic emission spectrometry and multichannel detection. We observed that the ultrasonic nebuliser offered a large improvement of signal intensity (10-133 greater) compared to a cyclone chamber coupled with a pneumatic Meinhard nebuliser. This improvement is associated with an average increase of signal to background ratio by a factor 86 and an average decrease of detection limits by a factor 6. The improvement factors generally depend on the element and for the same element on spectral lines. Typically, the observed values of detection limits in this work are lower than those published and obtained in non-ultra-clean conditions. The results emphasize that the environmental conditions of cleaning and analysis are essential to avoid and control cross contamination of the samples and hence to obtain low detection limits.     

Rates of base-catalysed cleavage of pyridyl-, quinolyl-, picolyl- and (quinolylmethyl)-trimethylsilanes

Rates of cleavage of some picoyl- and (quinolylmethyl)-trimethylsilanes (RSiMe₃, where R = PyCH₂ or QnCH₂SiMe₃) have been measured in “90%” aqueous methanolic sodium methoxide at 50°C. Relative reactivities are: 2-PyCH₂, 1.0; 3-PyCH₂, 0.030; 4-PyCH₂, 8.9; 2-QnCH₂, 41; 3-QnCH₂, 0.161; 4-QnCH₂, 37. The rates correlate well with those for base-catalysed hydrogen-exchange in the parent carbon acids RH. Approximate pK_a's (based on the scale of ion-pair acidities in CsNHC₆H₁₁H₂NC₆H₁₁, with pK_a of 9-phenylfluorene = 18.6) for the carbon acids, RH, can be derived as follows: 2-PyCH₃, 29.5; 3-PyCH₃, 34; 4-PyCH₃, 27; 2-QnCH₃, 25; 3-QnCH₃, 32; 4-QnCH₃, 25.Rates of cleavage of pyridyl- and quinolyl-trimethylsilanes (PySiMe₃ and QnSiMe₃) by sodium hydroxide in 4 : 1 v/v Me₂SO/H₂O at 50°C have also been measured; and the relative reactivities are: 2-Py, 1.0; 3-Py, 2.9; 4-Py, 8.4; 2-Qn, 15.9; 3-Qn, 12.7; 4-Qn, 184. The sequence of reactivity differes from that for base-catalysed hydrogen-exchange at the relevant positions of pyridine and quinoline, indicating that the reactivities are not determined in both cases (if in either) solely by the stabilities of the corresponding carbanions.     

The Dyeing of Nylon and Cotton Cloth with Azo Dyes: Kinetics and Mechanism

The mechanism of the dyeing of cotton and nylon cloth by the azo dyes Orange G and Sunset Yellow FCF was investigated using a channel flow cell. The variation in dyeing with flow rate was found to proceed via a mechanism in which the flux of dye entering the cloth relative to the flux of dye to the cloth surfacedecreasedwith increasing flow rate. A mechanism is deduced in which the dye passes from bulk solution, through a porous surface layer within the cloth, before passing into the bulk cloth. Adsorption onto surface sites in this porous layer blocks the passage of further dye into the cloth. Kinetic parameters for such a mechanism are given.     

Rearrangement during cyclisation of some 3-(2-pyrrolyl) propionic acids and related compounds

Cyclisation of the title compounds leads to mixtures of the expected 4H-cyclopental[b]pyrrol-4-ones (1), the corresponding 6-ones (3) by a single rearrangement, and the cyclopenta[c]pyrrol-4-ones (4) by a double rearrangement, the proportions depending upon the substituents.The ¹H NMR spectra of 2-methyl-4H-cyctopenta[b]thiophen-6-one (3f) shows 6J long range $\text{CH}{}_3\text{CH}{}_2$ coupling, but this is absent in the corresponding pyrroles (3c,d). The ¹³C spectra of 1 and 3 cannot be interpreted on the basis of substituent chemical shifts in pyrroles and thiophens, and are clearly -CH = CH-X (X = NMe, NPh, S) bridged derivatives of cyclopent-2-enone.     

The effects of temperature and pressure on the lifetime of benzophenone emission

The variation in the lifetime of flash-excited gaseous benzophenone with pressure and temperature indicates that (1) self-quenching is a relatively inefficient process for the long-lived emission, k_sq = 9 × 10⁵ M^?1 s^?1 (estimated from solution data) at 25°C and 1.2 × 10⁷ M^?1 s^?1 at 170°C and (2) the lifetime decreases with increasing temperature as a result of photochemical and photophysical decay pathways which have significant activation energies. The importance of diffusion to the walls on lifetime measurements is discussed.     

Separation of rotational diffusion and level kinetics in transient absorption spectroscopy

Transient absorption spectroscopy on electronic levels of molecules in the liquid phase is governed by population kinetics as well as rotational diffusion. The goal of transient absorption experiments has been the true level kinetics free of rotation. Moreover, to extract the rotational time from transient photodichroism experiments the knowledge of true population kinetics is instrumental. Three methods for separating rotational and level kinetics are described theoretically, and one of them is performed experimentally using a repetitive picosecond spectrometer for the measurement of rotational behaviour of fluorescein 27 in solvents of different viscosity.     

The mass spectra of TMS-ethers of deuterated polyalcohols. A contribution to the structural investigation of sugars

Aldoses, ketoses, deoxy-aldoses, deoxy-keto-aldoses, lactones, deoxy-lactones and other similar compounds are readily reduced by NaBD₄ to the corresponding polyalcohol. Their trimethylsilyl ethers show characteristic mass spectra which allow firm assignments of the position of deuteration and hence of the nature of the starting sugar compound. The g.c./m.s. coupling technique even allows trace analysis since full information can be derived from the most intense fragments of the mass spectra.     

Organic Reactions. Vol. 33 : Wiley; New York, etc.; 1985, xx + 347 pages £57.00.

The [CuPPh₃CCPh]₄ tetramer, obtained by treatment of [Cu(PPh₃)₂BH₄] with phenylacetylene and KOH (molar ratio 1/1/1) in 1/1 benzene/benzyl alcohol, consists of a tetrahedral skeleton of metal atoms bonded to four terminal phosphine molecules and to four μ-3 -bridging phenylacetylide ligands which behave essentially as 2e donors.