Diffusion coefficient measurement in a microfluidic analyzer using dual-beam microscale-refractive index gradient detection. Application to on-chip molecular size determination

We report a microchip-based detection scheme to determine the diffusion coefficient and molecular mass (to the extent correlated to molecular size) of analytes of interest. The device works by simultaneously measuring the refractive index gradient (RIG) between adjacent laminar flows at two different positions along a microchannel. The device, referred to as a microscale molecular mass sensor (micro-MMS), takes advantage of laminar flow conditions where the mixing of two streams occurs essentially by diffusion across the boundary between the two streams. Two flows merge on the microchip, one containing solvent only, referred to as the mobile phase stream and one which contains the analyte(s) of interest in the solvent, i.e. the sample stream. As these two streams merge and flow parallel to each other down the microchannel a RIG is created by the concentration gradient. The RIG is further influenced by analyte diffusion from the sample stream into the mobile phase stream. Measuring the RIG at a position close to the merging point (upstream signal) and simultaneously a selected distance further down the microchannel (downstream signal) provides real-time data related to the extent a given analyte has diffused, which can be readily correlated to analyte molecular mass by taking the ratio of the downstream-to-upstream signals. For the dual-beam RIG measurements, a diode laser output is coupled to a single mode fiber optic splitter with two output fibers. Light from each fiber passes through a graded refractive index (GRIN) lens forming a collimated beam that then passes through the microchannel and then on to a position sensitive detector (PSD). The RIG at both detection positions deflects the two collimated probe beams. The deflection angle of each beam is then measured on two separate PSDs. The micro-MMS was evaluated using polyethylene glycols (PEGs), sugars, and as a detector for size-exclusion chromatography (SEC). Peak purity can be readily identified using the micro-MMS with SEC. The limit of detection was 0.9 ppm (PEG at 11 840 g/mol) at the upstream detection position corresponding to a RI limit of detection (LOD) (3sigma) of 7-10(-8) RI. The pathlength for the RIG measurement was 200 microm and the angular LOD was 0.23 micro(rad) with a detection volume of 8 nl at both positions. The average molecular mass resolution was 9% (relative standard deviation) for a series of PEGs ranging in molecular mass from 106 to 22 800 g/mol. With this excellent mass resolution, small molecules such as monosaccharides, disaccharides, and so on, are readily distinguished. The sensor is demonstrated to readily determine unknown diffusion coefficients.     

Evaluation of a reversed-phase column (supelcosil LC-ABZ) under isocratic and gradient elution conditions for estimating octanol-water partition coefficients

The solvation parameter model is used to identify suitable chromatographic models for estimating the octanol-water partition coefficient for neutral compounds of varied structure by reversed-phase liquid chromatography. The stationary phase Supelcosil LC-ABZ with methanol-water mobile phases affords a series of suitable correlation models for estimating the octanol-water partition coefficient (log KOW) under isocratic and gradient elution conditions. Isocratic separations with mobile phase compositions containing from about 25 to 40% (v/v) methanol provide the most accurate results for log KOW values in the range -0.1 to 4.0. Gradient separations programmed from 5 to 100% (v/v) methanol are suitable for faster separations of compounds with large log KOW values. The standard error in the estimate for the regression models of the predicted log KOW values against literature values are 0.135 log units for the 30% (v/v) methanol-water isocratic system and 0.263 log units for the methanol-water gradient system. Isocratic retention factors predicted from two gradient separations with gradient times of 15 and 45 min afford a poorer fit for the correlation models between log KOW and the estimated retention factors than that of either the above isocratic and gradient models. Plots of the retention factor (log k) as a function of mobile phase composition are generally non-linear. Values of log kw obtained by non-linear extrapolation to a volume fraction of 0% (v/v) methanol do not afford a useful model for estimating log KOW.     

Iron chelation properties of an extracellular siderophore exochelin MN

The coordination chemistry of an extracellular siderophore produced by Mycobacterium neoaurum, exochelin MN (ExoMN), is reported along with its pK(a) values, Fe(III) and Fe(II) chelation constants, and aqueous solution speciation as determined by spectrophotometric and potentiometric titration techniques. Exochelin MN is of particular interest as it can efficiently transport iron into pathogenic M. leprae, which is responsible for leprosy, in addition to its own parent cells. The Fe(III) coordination properties of ExoMN are important with respect to understanding the Fe(III) acquisition and uptake mechanism in pathogenic M. leprae, as the siderophores from this organism are very difficult to isolate. Exochelin MN has two hydroxamic acid groups and an unusual threo-beta-hydroxy-l-histidine available for Fe(III) chelation. The presence of threo-beta-hydroxy-l-histidine gives rise to a unique mode of Fe(III) coordination. The pK(a) values for the two hydroxamic acid moieties, the histidine imidazole ring and the alkylammonium groups on ExoMN, correspond well with the literature values for these moieties. Proton-dependent Fe(III)- and Fe(II)-ExoMN equilibrium constants were determined using a model involving sequential protonation of the Fe(III)- and Fe(II)-ExoMN complexes. These data were used to develop a model whereby deprotonation reactions on the surface of the complex in the second coordination shell result in first coordination shell isomerization. The overall formation constants were calculated: log beta(110) = 39.12 for Fe(III)-ExoMN and 16.7 for Fe(II)-ExoMN. The calculated pFe value of 31.1 is one of the highest among all siderophores and their synthetic analogues and indicates that ExoMN is thermodynamically capable of removing Fe(III) from transferrin. The E(1/2) for the Fe(III)ExoMN/Fe(II)ExoMN(-) couple was determined to be -595 mV from quasi-reversible cyclic voltammograms at pH = 10.8, and the pH-dependent E(1/2) profile was used to determine the Fe(II)-ExoMN protonation constants.     

Esters of 5-carboxyl-5-methyl-1-pyrroline N-oxide: a family of spin traps for superoxide

Apparent rate constants, at acidic pH and neutral pH for the reaction of a family of ester-containing 5-carboxyl-5-methyl-1-pyrroline N-oxides with superoxide (O2*-) were estimated, using ferricytochrome c as a competitive inhibitor. It was of interest to note that the rate constants were similar among the different nitrones and not that significantly different from that found for 5-(diethoxyphosphoryl)-5-dimethyl-1-pyrroline N-oxide. At acidic pH, the rate constant for spin trapping O2*- was 3-fold greater than that at physiological pH. Subsequent experiments determined the half-life of aminoxyls, derived from the reaction of these nitrones with O2*-. The EPR spectra were modeled by using a global analysis method. The results clearly demonstrated that EPR spectra of all the aminoxyls were inconsistent with a model that included a single gamma-hydrogen splitting. A better interpretation modeled them as two diastereomers with identical nitrogen splittings and slightly different beta-hydrogen splittings. Detailed line width analyses slightly favored an equal line width-unequal population ratio for the two diastereomers.     

Comparison of reversed-phase liquid chromatography and hydrophilic interaction/cation-exchange chromatography for the separation of amphipathic alpha-helical peptides with L- and D-amino acid substitutions in the hydrophilic face

Mixed-mode hydrophilic interaction/cation-exchange chromatography (HILIC/CEX) is a novel high-performance technique which has excellent potential for peptide separations. Separations by HILIX/CEX are carried out by subjecting peptides to linear increasing salt gradients in the presence of high levels of acetonitrile, which promotes hydrophilic interactions overlaid on ionic interactions with the cation-exchange matrix. In the present study, HILIC/CEX has been compared to reversed-phase liquid chromatography (RP-HPLC) for separation of mixtures of diastereomeric amphipathic alpha-helical peptide analogues, where L- and D-amino acid substitutions were made in the centre of the hydrophilic face of the amphipathic alpha-helix. Unlike RP-HPLC, temperature had a substantial effect on HILIC/CEX of the peptides, with a rise in temperature from 25 to 65 degrees C increasing the retention times of the peptides as well as improving resolution. Our results again highlight the potential of HILIC/CEX as a peptide separation mode in its own right as well as an excellent complement to RP-HPLC.     

PdS2C2(COOMe)2](6n) (n = 0, -1, -2, -3, -4): hexanuclear homoleptic palladium dithiolene complexes

Reaction of a stoichiometric equivalent of the zinc-dithiolene complex, (tmeda)ZnS2C2(COOMe)2 (tmeda = tetramethylethylenediamine), with (MeCN)2PdCl2 results in a 1:1 homoleptic dithiolene that forms the hexanuclear cluster [PdS2C2(COOMe)2]6 (1). X-ray structure analysis of 1 indicates a Pd6S12 core comprised of six face-centered palladium atoms and 12 edge-centered sulfur atoms situated on an imaginary approximate cube. Complex 1 undergoes four distinct and reversible one-electron redox steps in dichloromethane at -186, -484, -1174, and -1524 mV versus a standard calomel electrode (ferrocenium+/ferrocene redox couple 409 mV). The two-electron reduction product of 1, [Bu4N]2[(PdS2C2(COOMe)2)6] (2), has been chemically isolated and characterized.     

Hexa‐μ‐chloro‐μ4‐oxo‐tetrakis{[5‐(2,4,6‐trimethylphenyl)pyrazole‐κN2]copper(II)}

The title compound, [Cu₄Cl₆O(C₁₂H₁₄N₂)₄], is a new example of the well known [Cu₄(μ₄‐O)(μ‐X)₆L₄] class of complex (X⁻ is Cl⁻, Br⁻ or I⁻, and L is a monodentate ligand). The molecule has crystallographic C₂ symmetry, with two Cl⁻ ions on each edge of a Cu₄ tetrahedron. Two of these, on opposite edges of the tetrahedron, accept intramolecular hydrogen bonds from two of the pyrazole N—H donors.     

Fermentation of a skim milk concentrate with Streptococcus thermophilus and chymosin: structure, viscoelasticity and syneresis of gels

Fermentation of a reconstituted skim milk concentrate (8% protein) was investigated to elucidate the effects of various fermentation parameters on the structural, rheological and visual (wheying-off) properties of the resulting gels (pH 4.60). Fermentation trials were performed with non-exocellular polysaccharide-producing strains of Streptococcus thermophilus at various fermentation temperatures and at various chymosin levels. Oscillatory vane rheometry carried out on the intact gels (at 4 °C) showed that the level of chymosin had a significant impact on the gel strength (storage modulus G′). This can be explained by the arrangement of casein micelles into more compact aggregates and the enhanced fusion of aggregated casein micelles as revealed by transmission electron microscopy for the gels fermented with chymosin. Wheying-off of the stirred gels as measured by a centrifugation test (at 4 °C) and pore size of the intact gel structures investigated by scanning electron microscopy both increased with increasing level of chymosin and increasing fermentation temperature (resulting in an increase in acidification rate). A higher level of syneresis (wheying-off) is explained by the larger pore size, since larger pores present a lower resistance to the outflow of whey from the gel.