The effects of temperature and pressure on the lifetime of benzophenone emission

The variation in the lifetime of flash-excited gaseous benzophenone with pressure and temperature indicates that (1) self-quenching is a relatively inefficient process for the long-lived emission, k_sq = 9 × 10⁵ M^?1 s^?1 (estimated from solution data) at 25°C and 1.2 × 10⁷ M^?1 s^?1 at 170°C and (2) the lifetime decreases with increasing temperature as a result of photochemical and photophysical decay pathways which have significant activation energies. The importance of diffusion to the walls on lifetime measurements is discussed.     

Synthesis of 2,3,9,10,16,17,23,24-Octaalkynylphthalocyanines and the Effects of Concentration and Temperature on Their (1)H NMR Spectra

The syntheses of 3,4- and 4,5-diiodophthalonitriles are described. Coupling of the latter compound with Pd(PPh(3))(2)Cl(2) and 1-octyne, 1-heptyne, 1-hexyne, 1-pentyne, and 3,3-dimethyl-1-butyne gave a series of 4,5-dialkynylphthalonitriles. Hydrogenation of 4,5-bis(1-pentynyl)phthalonitrile and 4,5-bis(3,3-dimethyl-1-butynyl)phthalonitrile gave 4,5-dipentylphthalonitrile and 4,5-bis(3,3-dimethylbutyl)phthalonitriles. Condensation of the dialkynylphthalonitriles with lithium 1-pentoxide in 1-pentanol gave 2,3,9,10,16,17,23,24-octaalkynylphthalocyanines, while intervention of the intermediate dilithium phthalocyanines with zinc acetate gave the related zinc(II) phthalocyanines. (1)H NMR spectroscopy of these octaalkynylphthalocyanines exhibited large chemical shifts (1-2 ppm) of the internal and aromatic protons at concentrations ranging from 10(-)(2) to 10(-)(5) M and at temperatures from 27 to 147 degrees C. The effects of aggregation phenomena are discussed. The importance of reporting concentration and temperature values for NMR spectra of phthalocyanines is stressed.     

SPECTROSCOPIC STUDIES OF CUTANEOUS PHOTOSENSITIZING AGENTS–XV. ANTHRALIN and ITS OXIDATION PRODUCT 1,8-DIHYDROXYANTHRAQUINONE

The photochemistry (Type I and II) of anthralin and its photo-oxidation product 1,8-dihydroxyanthraquinone (1,8-DHAQ) has been studied in ethanol, acetonitrile and dimethylsulfoxide using spin-trapping and direct detection of singlet oxygen (1O2) luminescence techniques. In ethanol, where it exists in its neutral form (AN), anthralin does not undergo either Type I or II reactions upon UV-irradiation. In contrast, irradiation of anthralin in acetonitrile, a solvent in which anthralin is partially converted to its corresponding mono-anion (AN-), generates both superoxide and singlet oxygen. Irradiation of anthralin in dimethylsulfoxide, where the AN- form is present in substantial quantity, generates superoxide and solvent derived radicals but no detectable singlet oxygen. UV-irradiation of 1,8-DHAQ in ethanol and acetonitrile produces both superoxide and singlet oxygen in significant yields. In dimethylsulfoxide, on the other hand, only superoxide and solvent derived radicals are observed. The 1O2 quantum yield for AN- and 1,8-DHAQ in acetonitrile were determined to be 0.14 and 0.88 relative to rose bengal in the same solvent. These findings suggest that the AN photosensitization occurs via Type I and II pathways, is solvent dependent and involves AN- as well as its oxidation product 1,8-DHAQ, which is a more potent generator of both singlet oxygen and superoxide.     

Reactions of alkynes with bis(triphenylphosphine)platinum-ethylene: A P-{H} NMR study

Internally consistent assignments of the ³¹P-{¹H} NMR parameters of the complexes [Pt(RCCR′)(PPh₃)₂] are proposed, based on the premise that the magnitude of ¹J(PtP) depends mainly on the nature of the moiety CR trans to P. For a given R, ²J(PP) correlates with ¹J(PtP) for thebond trans to CR. The alkynes PhCCSnEt₃, PhCCSnPh₃, Me₃SiCCCl, Me₃SiCCBr, Et₃SiCCI and MeCCI undergo oxidative addition reactions with [Pt(C₂H₄)(PPh₃)₂]; the intermediate alkyne complex was detected for PhCCSnEt₃, Me₃SiCCCl and Me₃CCBr. The triyne Me(CC)₃Me forms platinum(0) complexes by coordination with the central or terminal CC bond and appears also to give a platinum(II) complex by oxidative addition.     

Dihydroaromatic compounds in the Diels-Alder reaction—IV : Synthesis of bicyclic ketones

The in situ isomerisation and Diels-Alder reaction with 2-acetoxyacrylonitrile, of 2,5-dihydroanisole, leads to the adducts (1) which may be used as starting point for the synthesis of a number of bicyclo [2,2,2] octenones, bicyclo [3,2,1] octenones and bicyclo [3,2,2] nonenones. Under similar conditions, 2,5-dihydrotoluene reacts via an ene-reaction to produce, after hydrolysis, the acetylcyclohexadiene (27). The base-catalysed equilibration and subsequent Diels-Alder reactions of 2,5-dihydrotoluene have been investigated.     

Kinetic modelling of the thermal oxidation of polyisoprene elastomers. Part 2: Effect of sulfur vulcanization on mass changes and thickness distribution of oxidation products during thermal oxidation

Thermal oxidation of sulfur vulcanized polyisoprene samples was studied by gravimetry and IR mapping of carbonyl groups (to determine the oxidized layer thickness (TOL)) at temperatures ranging from 60 to 150 °C in air. Oxidation appears noticeably lower than that for the starting non-vulcanized polyisoprene, revealing a stabilizing effect of sulfur-containing species. After a short period where mass loss presumably due to water evaporation predominates, the sample mass increases until a plateau corresponding to 6.3% (at 60 °C) to 0.5% (at 140 °C) mass gain. Practically no weight gain (∼0.1%) was observed at 150 °C. The mass uptake is due to oxygen grafting to the chains. TOL varies from about 4.6 mm (70 °C) to about 1 mm (150 °C).A kinetic model, derived from a mechanistic scheme of radical chain oxidation including stabilizing events due to hydroperoxide reduction by sulfur-containing groups and taking into account the diffusion-reaction coupling, was established and numerically resolved. The model predictions for mass changes and TOL values are in good agreement with experimental data.     

The kinetics of reaction of 4-nitrophenylnitromethane with N’-Propyl-N,N-dipropylbenzimidamide in aprotic solvents. a steric effect on tunneling

Thermodynamic and kinetic parameters have been established for the reaction between the carbon acid, 4-nitrophenylnitromethane, (4-NPNM), and the base N’-n-propyl-N,N-di-n-propylbenzimidamide, (N’PDPBA), in mesitylene and in chlorobenzene. In some cases deuteron transfer from 4-(D₂)NPNM to the base has also been studied. In addition, some results for the proton transfer reaction in tetrahydrofuran have been collected. Spectrophotometric methods have been employed to monitor the ion-pair product, which is solvatochromic. In general the solvent dependence of the parameters is as expected, but there is some indication of specific solvation. The kinetic isotope effects of 11 and 8 in mesitylene and chlorobenzene, respectively, are larger than those predicted classically. However, as is discussed the n-propyl group on the secondary nitrogen of the base may serve to reduce the extent of tunneling compared to that in an unsubstituted analogue by a steric effect.     

A photochemically driven molecular-level abacus

A molecular-level abacus-like system driven by light inputs has been designed in the form of a [2]rotaxane, comprising the pi-electron-donating macrocyclic polyether bis-p-phenylene-34-crown-10 (BPP34C10) and a dumbbell-shaped component that contains 1) a Ru(II) polypyridine complex as one of its stoppers in the form of a photoactive unit, 2) a p-terphenyl-type ring system as a rigid spacer, 3) a 4,4'-bipyridinium unit and a 3,3'-dimethyl-4,4'-bipyridinium unit as pi-electron-accepting stations, and 4) a tetraarylmethane group as the second stopper. The synthesis of the [2]rotaxane was accomplished in four successive stages. First of all, the dumbbell-shaped component of the [2]rotaxane was constructed by using conventional synthetic methodology to make 1) the so-called "west-side" comprised of the Ru(II) polypyridine complex linked by a bismethylene spacer to the p-terphenyl-type ring system terminated by a benzylic bromomethyl function and 2) the so-called "east-side" comprised of the tetraarylmethane group, attached by a polyether linkage to the bipyridinium unit, itself joined in turn by a trismethylene spacer to an incipient 3,3'-dimethyl-4,4'-bipyridinium unit. Next, 3) the "west-side" and "east-side" were fused together by means of an alkylation to give the dumbbell-shaped compound, which was 4) finally subjected to a thermodynamically driven slippage reaction, with BPP34C10 as the ring, to afford the [2]rotaxane. The structure of this interlocked molecular compound was characterized by mass spectrometry and NMR spectroscopy, which also established, along with cyclic voltammetry, the co-conformational behavior of the molecular shuttle. The stable translational isomer is the one in which the BPP34C10 component encircles the 4,4'-bipyridinium unit, in keeping with the fact that this station is a better pi-electron acceptor than the other station. This observation raises the question- can the BPP34C10 macrocycle be made to shuttle between the two stations by a sequence of photoinduced electron transfer processes? In order to find an answer to this question, the electrochemical, photophysical, and photochemical (under continuous and pulsed excitation) properties of the [2]rotaxane, its dumbbell-shaped component, and some model compounds containing electro- and photoactive units have been investigated. In an attempt to obtain the photoinduced abacus-like movement of the BPP34C10 macrocycle between the two stations, two strategies have been employed-one was based fully on processes that involved only the rotaxane components (intramolecular mechanism), while the other one required the help of external reactants (sacrificial mechanism). Both mechanisms imply a sequence of four steps (destabilization of the stable translational isomer, macrocyclic ring displacement, electronic reset, and nuclear reset) that have to compete with energy-wasteful steps. The results have demonstrated that photochemically driven switching can be performed successfully by the sacrificial mechanism, whereas, in the case of the intramolecular mechanism, it would appear that the electronic reset of the system is faster than the ring displacement.     

Bifurcated, modular syntheses of chiral annulet triazacyclononanes

Three chiral 2,6-disubstituted tri-N-methyl azamacrocycles have been prepared by modular methods. These macrocycles were accessed from three chiral 1,4,7-triazaheptanes intermediates that were prepared by two independent routes. The first of these routes involved the benzylamine opening of chiral tosyl aziridines followed by debenzylation but was problematic on solubility grounds. A second, more effective, route was developed which avoided debenzylation by using ammonia in the nucleophilic opening of chiral tosyl aziridines.