Quantitative analysis of WC grain shape in sintered WC-Co cemented carbides

The morphology of WC grains is examined by ab initio calculations, and by transmission electron microscopy in a WC-Co cemented carbide. Two compositions are studied to determine the effect of carbon chemical potential on the shape development. The WC grains are found to be truncated triangles, and the grain morphology is adequately reproduced by the ab initio calculations. The energy difference between the two types of grain facets is shown to be due to the formation of stronger bonds with more covalent character between low coordinated W and Co atoms at one type of facet.     

The effect of rate of stimulation on perception of spectral shape by cochlear implantees

The effect of rate of stimulation on spectral shape perception was measured in six users of the Nucleus CI24 cochlear implant. Three spectral shapes were created by using three profiles of current across seven electrode positions. Each current profile was replicated in three stimuli that interleaved stimulus pulses across the seven electrodes with cycle rates (rate per electrode) of 450, 900, and 1800 Hz. The stimulus space resulting from a multidimensional scaling experiment showed a clear dimension related to the rate of stimulation that was orthogonal to the dimension related to the spectral shapes. A second experiment was performed with the same subjects to investigate whether the perceptual dimension related to rate in Experiment 1 could be attributed to different perceptual flatness of the profiles at different rates. In Experiment 2, the rate of stimulation was fixed at 900 Hz and three profiles were created for each spectral shape that differed in flatness. This experiment did not, however, result in an independent perceptual dimension related to the flatness of the profile. In conclusion, rate of stimulation provided an independent perceptual dimension in the multiple-electrode stimuli, in spite of the rates being not discriminable or barely discriminable in single-electrode stimulation.     

Blends of carbon blacks and multiwall carbon nanotubes as reinforcing fillers for hydrocarbon rubbers

The reinforcement of a styrene‐butadiene rubber (SBR) by single fillers—carbon black (CB) or multiwall carbon nanotubes (MWNTs)—or by mixtures of CB and MWNTs, is investigated. The morphologies, mechanical and electrical properties of the composites, are analyzed. A significant improvement in the tensile properties is observed for samples containing a dual phase. Using atomic force (AFM) and transmission electron (TEM) microscopies, we demonstrate that the double loading improves the dispersion of the nanotubes in SBR. Electrical measurements show lower resistivity and a lower percolation threshhold for composites containing blends of fillers, which provides further evidence of better dispersion. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 46: 1939–1951, 2008     

Demonstration of a surface plasmon-coupled emission (SPCE)-based immunoassay in the absence of a spacer layer

The technique of surface plasmon-coupled emission (SPCE) involves the coupling of light which is emitted from a fluorophore into the surface plasmon of an adjacent thin metal film, giving rise to highly directional emission. We have combined the advantages of SPCE with the high light collection efficiency of supercritical angle fluorescence by carrying out an immunoassay on a paraboloid array biochip in the absence of the conventional SPCE spacer layer normally used to minimize metal quenching of the fluorescence. In this work, we have successfully demonstrated an SPCE-based assay by utilizing the protein assay layer as the spacer layer. A novel 3 × 3 injection molded polymer biochip with paraboloid elements was used. The paraboloid elements served to enhance the light collection efficiency while the top surface was coated with a gold layer to use excitation of surface plasmons and detection of SPCE emission. Theoretical modeling of the gold-protein layer structure showed that the surface plasmon resonance angles were located in the detection range of the paraboloid biochip. The polarization dependence of SPCE emission was also demonstrated. Finally, a human IgG sandwich immunoassay was carried out which exhibited a limit of detection of ~10 ng/ml using 3σ. The results demonstrate the potential of the SPCE-based paraboloid array biochip as a novel platform for high-throughput analysis of biomolecular interactions.     

Instant controlled pressure drop extraction of lavandin essential oils: Fundamentals and experimental studies

Détente Instantanée contrôlée (DIC), French for Instant Controlled Pressure Drop, was performed on laboratory apparatus as well as on a pilot plant for proving its feasibility, and identifying the optimized processing conditions and recognizing the energy consumption and the quantity of water used for such an operation. GC–MS and SPME analysis of the extracts and residue material were carried out to assess the extracts and solid residues. The lavandin essential oils obtained by using the new DIC extraction process was studied, modeled and quantitatively and qualitatively compared to the conventional hydrodistillation method. The most important differences between the two essential oils were reflected in the yields, with 4.25 as against 2.3 g EO/100 g of raw matter, and in the extraction time, with 480 s as against some hours for respectively the DIC and the hydrodistillation operations. These differences have been previewed through the fundamental analysis. They can normally explain the great decreasing of energy consumption to be 662 kWh/t of raw material. The amount of water to be added was about 42 kg water/t of raw material.     

Metallation of diazines. III. New synthesis of analogues of trimethoprim and of bacimethrin

4-Chloro-2,6-dimethoxypyrimidine was lithiated by lithium 2,2,6,6-tetramethylpiperidide. The resulting lithio derivative was submitted to reaction with carbonyl derivatives, iodine and trimethyltin chloride. Synthesis of analogues of trimethoprim and of bacimetrin are reported.     

A Ruthenium(II)–Copper(II) Dyad for the Photocatalytic Oxygenation of Organic Substrates Mediated by Dioxygen Activation

Dioxygen activation by copper complexes is a valuable method to achieve oxidation reactions for sustainable chemistry. The development of a catalytic system requires regeneration of the Cu^I active redox state from Cu^II. This is usually achieved using extra reducers that can compete with the Cu^II(O₂) oxidizing species, causing a loss of efficiency. An alternative would consist of using a photosensitizer to control the reduction process. Association of a Ru^II photosensitizing subunit with a Cu^II pre‐catalytic moiety assembled within a unique entity is shown to fulfill these requirements. In presence of a sacrificial electron donor and light, electron transfer occurs from the Ru^II center to Cu^II. In presence of dioxygen, this dyad proved to be efficient for sulfide, phosphine, and alkene catalytic oxygenation. Mechanistic investigations gave evidence about a predominant ³O₂ activation pathway by the Cu^I moiety.     

Enzymatic Method for the Synthesis of Long DNA Sequences with Multiple Repeat Units

A polymerase chain reaction (PCR) derived method for preparing long DNA, consisting of multiple repeat units of one to ten base pairs, is described. Two seeding oligodeoxynucleotides, so‐called oligoseeds, which encode the repeat unit and produce a duplex with 5′‐overhangs, are extended using a thermostable archaeal DNA polymerase. Multiple rounds of heat–cool extension cycles, akin to PCR, rapidly elongate the oligoseed. Twenty cycles produced long DNA with uniformly repeating sequences to over 20 kilobases (kb) in length. The polynucleotides prepared include [A]_n/[T]_n, [AG]_n/[TC]_n, [A₂G]_n/[T₂C]_n, [A₃G]_n/[T₃C]_n, [A₄G]_n/[T₄C]_n, [A₉G]_n/[T₉C]_n, [GATC]_n/[CTAG]_n, and [ACTGATCAGC]_n/[TGACTAGTCG]_n, indicating that the method is extremely flexible with regard to the repeat length and base sequence of the initial oligoseeds. DNA of this length (20 kb≈7 μm) with strictly defined base reiterations should find use in nanomaterial applications.