Selective Hydrogen Atom Abstraction through Induced Bond Polarization: Direct α‐Arylation of Alcohols through Photoredox,HAT, and Nickel Catalysis

The combination of nickel metallaphotoredox catalysis, hydrogen atom transfer catalysis, and a Lewis acid activation mode, has led to the development of an arylation method for the selective functionalization of alcohol α‐hydroxy C?H bonds. This approach employs zinc‐mediated alcohol deprotonation to activate α‐hydroxy C?H bonds while simultaneously suppressing C?O bond formation by inhibiting the formation of nickel alkoxide species. The use of Zn‐based Lewis acids also deactivates other hydridic bonds such as α‐amino and α‐oxy C?H bonds. This approach facilitates rapid access to benzylic alcohols, an important motif in drug discovery. A 3‐step synthesis of the drug Prozac exemplifies the utility of this new method.     

Access to the Bis‐benzene Cobalt(I) Sandwich Cation and its Derivatives: Synthons for a “Naked” Cobalt(I) Source?

The synthesis and structural characterization of the hitherto unknown parent Co(bz)₂⁺ (bz=benzene) complex and several of its derivatives are described. Their synthesis starts either from a CoCO₅⁺ salt, or directly from Co₂(CO)₈ and a Ag⁺ salt. Stability and solubility of these complexes was achieved by using the weakly coordinating anions (WCAs) [Al(OR^F)₄]^? and [F{Al(OR^F)₃}₂]^? {R^F=C(CF₃)₃} and the solvent ortho‐difluorobenzene (o‐DFB). The magnetic properties of Co(bz)₂⁺ were measured and compared in the condensed and gas phases. The weakly bound Co(o‐dfb)₂⁺ salts are of particular interest for the preparation of further Co^I salts, for example, the structurally characterized low‐coordinate 12 valence electron Co(P^tBu₃)₂⁺ and Co(NHC)₂⁺ salts.     

An Immobilized‐Dirhodium Hollow‐Fiber Flow Reactor for Scalable and Sustainable C−H Functionalization in Continuous Flow

A scalable flow reactor is demonstrated for enantioselective and regioselective rhodium carbene reactions (cyclopropanation and C?H functionalization) by developing cascade reaction methods employing a microfluidic flow reactor system containing immobilized dirhodium catalysts in conjunction with the flow synthesis of diazo compounds. This allows the utilization of the energetic diazo compounds in a safe manner and the recycling of the dirhodium catalysts multiple times. This approach is amenable to application in a bulk‐scale synthesis employing asymmetric C?H functionalization by stacking multiple fibers in one reactor module. The products from this sequential flow–flow reactor are compared with a conventional batch reactor or flow–batch reactor in terms of yield, regioselectivity, and enantioselectivity.     

Effect of agitation and aeration on production of hexokinase by Saccharomyces cerevisiae

A batch culture of Saccharomyces cerevisiae for the production of hexokinase was carried out in a 5-L fermentor containing 3 L of culture medium, which was in oculated with cell suspension (about 0.7 g/L), and left ferm entingat 35°C and pH 4.0. The aeration and agitation were adjusted to attain k _La values of 15, 60, 135, and 230 h⁻¹. The highest hexokinase productivity (754.6 U/[L h]) and substrate-cell conversion yield (0.21 g/g) occurred for a k _La of 60 h⁻¹. Moreover, the formation of hexokinase and cell growth are coupled events, which is in accordance with the constitutive character of this enzyme. Hexokinase formation for k _La>60 h⁻¹ was not enhanced probably owing to saturation of the respiratory pathway by oxygen.     

Kinetics of ethanol fermentation with high biomass concentration considering the effect of temperature

A model of ethanol fermentation considering the effect of temperature was developed and validated. Experiments were performed in a temperature range from 28 to 40°C in continuous mode with total cell recycling using a tangential microfiltration system. The developed model considered substrate, product and biomass inhibition, as well as an active cell phase (viable) and an inactive (dead) phase. The kinetic parameters were described as functions of temperature.     

Termolecular ion-molecule reactions in Titan’s atmosphere. II: The structure of the association adducts of HCNH+ with C2H2 and C2H4

The ion-molecule reactivity of the products formed in the association reactions of HCNH+ with C2H2 (C3H4N+) and C2H4 (C3H6N+) has been investigated to provide information on the structures of the adducts thus formed. The C3H4N+ and C3H6N+ adducts were formed in the reaction flow tube of a flowing afterglow sourced-selected ion flow tube (FA-SIFT) and their reactivity with a neutral molecular "probe" examined. The reactivity of possible known structural isomers for the C3H4N+ and C3H6N+ ions was investigated in both the FA-SIFT and an ion cyclotron resonance spectrometer (ICR). Ab initio investigations of the potential energy surfaces for both structures at the G2(MP2) level have also been performed and structures corresponding to local minima on both surfaces have been identified and evaluated. The results of these experimental and theoretical studies show that at room temperature, the C3H4N+ adduct ion contains two isomers; a less reactive one that is likely to be a four-membered cyclic covalent isomer (approximately 70%) and a faster reacting component that is probably an electrostatic complex (approximately 30%). The C3H6N+ adduct ion formed from HCNH+ + C2H4 at room temperature is a single isomer that is likely to be the four-membered covalently bound cyclic CH2CH2CHNH+ species.     

Isolation of the components of a complex mixture by means of column switching for their enhanced detection by mass spectrometry

Mass spectral characterization of low-level impurities in drug substances and formulations may be challenging when using a validated HPLC method developed for optimal chromatographic performance. In many cases, either the mobile phase contains non-volatile additives that are deleterious to the operation of the mass spectrometer, or some of the related substances fail to ionize effectively under electrospray ionization or atmospheric pressure chemical ionization conditions. This paper describes a way to capture these low-level compounds from an analytical HPLC column using a small trapping column. Mixture components are retained on the trapping column by means of reducing the solvent strength of the eluent. Subsequent elution of trapped compounds using mobile phases more amenable to mass spectral analysis yields improved detection and characterization of low-level compounds of interest. Possible applications of peak trapping and elution include: (1) analysis of compounds separated using a mobile phase containing high concentrations of non-volatile additives, (2) analysis of organic acids separated using a low-pH mobile phase (containing trifluoroacetic acid), and (3) improving the detection limit of a low-level compound of interest through multiple collections. The peak trapping apparatus and optimization experiments are described.     

Synthesis and crystal structure of [(η3-C3H5)(CO)2Mo(μ-S2CPCy3)-Mo(η3-CH2CMeCH2)(CO)2]

A novel dimolybdenum complex [(³-C₃H₅)(CO)₂Mo(-S₂CPCy₃)Mo(³-CH₂CMeCH₂)(CO)₂], obtained by reacting the [(CO)₂(³-C₃H₅)Mo(-S₂CPCy₃)Mo(CO)₃]^– anion with an excess of ClCH₂CMe=CH₂, has been characterized by i.r., ³¹P{¹H}, ¹H- and ¹³C-n.m.r. spectroscopy and by elemental analysis. The crystal structure of the complex, determined by X-ray diffraction, shows a definite preference for the central carbon of the S₂CPCy₃ bridge to bind to the Mo(2) atom coordinated by ³-2-methylallyl, rather than the Mo(1) atom attached to unsubstituted ³-allyl ligand.     

Microwave activation of electrochemical processes: enhanced PbO2 electrodeposition, stripping and electrocatalysis

Microwave activation of electrochemical processes has recently been introduced as a new technique for the enhancement and control of processes at electrode|solution (electrolyte) interfaces. This methodology is extended to processes at glassy carbon and boron-doped diamond electrodes. Deposition of both Pb metal and PbO₂ from an aqueous solution of Pb²⁺ (0.1 M HNO₃) are affected by microwave radiation. The formation of PbO₂ on anodically pre-treated boron-doped diamond is demonstrated to change from kinetically sluggish and poorly defined at room temperature to nearly diffusion controlled and well defined in the presence of microwave activation. Calibration of the temperature at the electrode|solution (electrolyte) interface with the Fe^3+/2+ (0.1 M HNO₃) redox system allows the experimentally observed effects to be identified as predominantly thermal in nature and therefore consistent with a localized heating effect at the electrode|solution interface. The microwave-activated deposition of PbO₂ on boron-doped diamond remains facile in the presence of excess oxidizable organic compounds such as ethylene glycol. An increase of the current for the electrocatalytic oxidation of ethylene glycol at PbO₂/boron-doped diamond electrodes in the presence of microwave radiation is observed. Preliminary results suggest that the electrodissolution of solid microparticles of PbO₂ abrasively attached to the surface of a glassy carbon electrode is also enhanced in the presence of microwave radiation. Electronic Publication     

Cover Picture

The cover picture shows in the background the whole cell of a methanotrophic bacterium on which are superimposed components of methane monooxygenase (the structure of the hydroxylase component (top), one of the two four-helix bundles that house the catalytic diiron centers (left)) and a schematic diagram of the catalytic cycle by which the enzyme converts dioxygen and methane into methanol and water. More about this unusual enzyme system is reported by Lippard et al. on p. 2782 ff.