Decoded fingerprints of hyperresponsive,expanding product space: polyether cascade cyclizations as tools to elucidate supramolecular catalysis

Simple enough to be understood and complex enough to be revealing, cascade cyclizations of diepoxides are introduced as new tools to characterize supramolecular catalysis. Decoded product fingerprints are provided for a consistent set of substrate stereoisomers, and shown to report on chemo-, diastereo- and enantioselectivity, mechanism and even autocatalysis. Application of the new tool to representative supramolecular systems reveals, for instance, that pnictogen-bonding catalysis is not only best in breaking the Baldwin rules but also converts substrate diastereomers into completely different products. Within supramolecular capsules, new cyclic hemiacetals from House–Meinwald rearrangements are identified, and autocatalysis on anion–π catalysts is found to be independent of substrate stereochemistry. Decoded product fingerprints further support that the involved epoxide-opening polyether cascade cyclizations are directional, racemization-free, and interconnected, at least partially. The discovery of unique characteristics for all catalysts tested would not have been possible without decoded cascade cyclization fingerprints, thus validating the existence and significance of privileged platforms to elucidate supramolecular catalysis. Once decoded, cascade cyclization fingerprints are easily and broadly applicable, ready for use in the community.

Hyperresponsive XL product space identifies polyether cascade fingerprinting as an attractive tool to elucidate supramolecular catalysis, including pnictogen-bonding, capsule and anion–π catalysts.

One general expectation from supramolecular catalysis^1–10 is that new ways to interact will provide new ways to transform on the molecular level. This translates to access to new reactivity and products, at best contributing to new solutions for otherwise persistent challenges in science and society. While these high expectations are attracting attention to the development of supramolecular catalysts, their systematic characterization is much less advanced. Most classical and modern benchmark reactions^1,9 are limited to one mechanism and cover little product space, also concerning chemo- and stereochemistry. To maximize the comparability of supramolecular catalysts, the ideal reaction would respond to as many parameters as possible at still manageable complexity. Epoxide opening polyether cascade cyclizations^10–13 promise to meet these requirements for a privileged platform to evaluate supramolecular catalysts. Charismatic in chemistry and biology, they have attracted the attention of many giants in the field.¹¹ They afford the largest polycyclic natural products, regularly featuring more than 10 rings made in one cascade. While product diversity of longer cascades is too complex and single cyclizations are too simple, minimalist cascades from diepoxide substrates such as 1 cover large structural space at tractable complexity (Fig. 1). In substrate 1, supramolecular catalysts can activate nucleophile, electrophile and leaving group, and stabilize cationic and anionic transition states and reactive intermediates (Fig. 1a). Cyclizations can follow either the 5-exo-tet selectivity predicted by the Baldwin rules (B) or anti-Baldwin (A) 6-endo-tet selectivity, leading to the four constitutional isomers 2–5 (Fig. 1a and ​and2).2). They can occur with normal or reverse directionally,¹² forming ring 1 or ring 2 first, respectively (Fig. 1b). They can operate with pseudo S_N2, S_N1, or mixed mechanisms, and can integrate contributions from autocatalysis.^10,13 The stereochemistry covers cis–trans isomers at epoxide 1 and syn–anti isomers with regard to the two epoxides (Fig. 1c). This translates to the stereochemistry of products such as 2–5 at the ring junction and the exocyclic substituents of ring 2. Besides this expected diversity, the product space of the privileged substrate 1 further expands into structures that remain to be discovered, as demonstrated with two new products reported in this study.Open in a separate windowFig. 1(a) Epoxide-opening ether cascade cyclizations from diepoxide 1 as privileged platform to elaborate on supramolecular catalysis, with indication of possible contributions from electron-donating (red) and electron-accepting catalyst motifs (blue), exo-tet Baldwin (B) or endo-tet anti-Baldwin (A) chemoselectivity, (b) normal and reverse directionality, and (c) stereochemistry in selected substrates and products.Open in a separate windowFig. 2(a) Decoded product fingerprints for selected catalysts: Color-coded pie charts for products 2 (red), 3 (yellow), 4 (green), 5 (blue), 6 and 7 (teal) obtained from stereoisomers of cis and trans substrate isomers 1 with representative supramolecular catalysts 8–10 compared to general Brønsted acid (AcOH); results for cis,anti and trans,syn isomers of 1 are calculated (from data for the other diastereomer and the mixture of diastereomers in the respective series); estimated errors ± 5%. (b) Experimental results for cis,anti-1 cyclized with catalyst 9. (c) Selected X-ray structures from the BA series (p-bromobenzoyl derivatives). (d) Structure of catalysts, with indication of selected π-basic surfaces and hydrogen-bond donors on capsule 8 assembled from monomers 11, the cyclopean σ hole of pnictogen-bonding catalyst 9, and the π-acidic surface on anion–π catalyst 10.So far, substrate 1 has been used as a mixture of stereoisomers to characterize supramolecular catalysts.¹³ While results were intriguing, they could not be rationalized. Overlap of different trends obscured the key information and made product fingerprints dependent on the composition of the substrate mixtures. However, the observed hyperresponsiveness of the large product space suggested that decoded product fingerprints could provide a general tool to elucidate supramolecular catalysis.To assess the possibly privileged nature of diepoxide 1 as unifying substrate for supramolecular catalysis, we decided to synthesize and evaluate the necessary stereoisomers separately. The stereoisomers cis-1 and trans-1 were prepared by oxidation of the respective silyl protected cis- and trans-olefins with m-CPBA (meta-chloroperoxybenzoic acid), followed by deprotection (Fig. 2, Schemes S1 and S2^†). They were obtained as roughly equimolar mixtures of syn- and anti-diastereomers (cis-1: dr 54 : 46, trans-1: dr 50 : 50). Shi epoxidation¹⁴ in place of m-CPBA afforded enantioenriched cis,syn-1 (dr 89 : 11; dr 20 : 1 after purification) and trans,anti-1 (dr 82 : 18; dr 20 : 1 after purification) accordingly with unknown absolute configuration. These four substrates were sufficient to realize the complete analysis of the system because the product fingerprints for the remaining diastereomers cis,anti-1 and trans,syn-1 could be obtained from the difference of cis,syn-1 and trans,anti-1 and the respective mixture of diastereomers cis-1 and trans-1 (Fig. 2).To decode product fingerprints from different catalysts in their respective color-coded pie charts, all individual products were isolated and the diagnostic regions of their ¹H NMR spectra and chiral GC traces were assembled for direct comparison (Fig. 3). In most GC traces, the two peaks were well resolved for each pair of enantiomers, confirming access to nearly all stereochemical information. The resulting unified fingerprint of the complete system then allowed to rapidly assign products obtained from different catalysts down to the level of enantiomers. The validity of most structures was confirmed by X-ray crystallography (Fig. 2c and S78–S83^†). If necessary, derivatives were prepared to facilitate the growth of single crystals.Open in a separate windowFig. 3Decoded product fingerprints: Diagnostic regions of ¹H NMR spectra (a and b) and chiral GC (c and d) of purified cascade cyclization products from cis (a and c) and trans (b and d) substrate isomers 1 above representative examples of mixtures produced by AcOH and 9 combined (a and c), and by 8 (b and d).With the analytics in place, product fingerprints were recorded for representative supramolecular catalysts 8–10 in comparison to general Brønsted acid catalysis (Fig. 2). In the cis series, the product mixtures obtained from different catalysts contained all four constitutional isomers expected from Baldwin and anti-Baldwin cyclizations, that is cis-(BB)-2, cis-(BA)-3, cis-(AB)-4 and cis-(AA)-5 (Fig. 2a and ​and3a).3a). In contrast, trans-(AB)-4 was absent in the trans series, and two new products 6 and 7 were found instead (vide infra, Fig. 2a and ​and3b3b).In both the cis and the trans series, general Brønsted acid catalysis with AcOH was confirmed to follow the Baldwin rules almost exclusively, affording mostly (BB)-2 (Fig. 2). In the cis series, the supramolecular capsules 8 violated the Baldwin rules significantly (Fig. 2a). Capsules 8 self-assemble from resorcinarenes 11 and water (Fig. 2d).^3,4 Their internal surface offers hydrogen-bond donors and π-basic aromatic planes for catalysis within their confined interior.^3,4 Unique selectivities have been reported, also for bioinspired terpene cyclizations, for instance.⁴ From cascade cyclization with the mixture of cis-1 diastereomers in capsules 8, cis-(BA)-3 was obtained as the main product besides the still preferred cis-(BB)-2 (Fig. 2a). The pure cis,syn-1 showed a clearly different product distribution, characterized by an increased power to violate the Baldwin rule in cycle 2, affording cis-(BA)-3 as the main product. The calculated fingerprint for the products of cis,anti-1 gave the complementary dominance of the Baldwin conformant cis-(BB)-2 instead.Differences in selectivity for the syn- and anti-diastereomers in the cis series were most spectacular with the pnictogen-bonding catalyst 9 (Fig. 2a). Pnictogen-bonding catalysis has been introduced recently^5–7 for consideration as the non-covalent counterpart of Lewis acid catalysis, analogous to hydrogen-bonding catalysis as non-covalent counterpart of Brønsted acid catalysis.⁷ Catalyst 9 is centered around an antimony V with one deep σ hole acting as pnictogen-bond donor to initiate catalysis.⁷ Catalyst 9 has been shown previously to efficiently break the Baldwin rules in polyether cyclizations.^7,13 In the newly devised pie chart fingerprint, orthodox cis-(BB)-2 was indeed essentially absent (Fig. 2a). The mixture of diastereomers cis-1 afforded cis-(BA)-3 and cis-(AB)-4 as main products. In sharp contrast, diastereo-pure cis,syn-1 gave mostly cis,syn-(BA)-3. As a consequence, the calculated product fingerprint of cis,anti-1 showed the highly selective formation of cis,anti-(AB)-4.Selective access to cis,anti-(AB)-4 with pnictogen-bonding catalyst 9 was remarkable because none of the other stereoisomers of (AB)-4 were observed throughout the study (Fig. 3a and ​and4a).4a). Exclusive access to cis,anti-(AB)-4 from cis,anti-1 was understandable considering cascade cyclization with normal directionality (Fig. 1). Namely, the endo-tet cyclization of ring 1 will afford the reactive intermediate III (Fig. 4b). From this intermediate III, the exo-tet Baldwin conformant formation of ring 2 is possibly supported by an intramolecular hydrogen bond (Fig. 4b and c, arrows), which activates the nucleophile and places an epoxide in an equatorial position.Open in a separate windowFig. 4(a) The formation of only one out of four possible (AB) isomers 4 and (b) the origin of the selectivity and products found in the anti-Baldwin series with capsule 8 and pnictogen-bonding catalyst 9, with (c) selected X-ray structures.These favorable conditions to access cis,anti-(AB)-4 from cis,anti-1 contrasted sharply with the situation with all other diastereomers. In the cis series, access to the complementary cis,syn-(AB)-4 from cis,syn-1 is disfavored although the nucleophile in the reactive intermediate IV remains possibly activated by intramolecular hydrogen bonding. However, the axial orientations of epoxide in intermediate IV and a very bulky tertiary alcohol in product 4 make this reaction unlikely.With cis,syn-(AB)-4 from cis,syn-1 unfavorable, reactive intermediate IV obtained from an anti-Baldwin cyclization of ring 1 needs an alternative solution. An obvious choice is continuation with another endo-tet anti-Baldwin cyclization for ring 2 to result in cis,syn-(AA)-5 with a more flexible cis-fused oxepane ring. This cis,syn-(AA)-5 was indeed part of the product fingerprint of cis,syn-1 cyclized with pnictogen-bonding catalyst 9 (Fig. 2a). The markedly different amounts of cis,syn-(AA)-5 and cis,anti-(AB)-4 obtained from cis,syn-1 and cis,anti-1, respectively (Fig. 2a), would then suggest that normal cascade cyclizations are interconnected, possibly concerted (Fig. 1b).The differences of the selectivity of the cascade cyclization of cis,syn-1 and cis,anti-1 with pnictogen-bonding catalyst 9 (Fig. 2a) and the importance of the implications called for the experimental validation of the calculated results for cis,anti-1. Therefore, pure diastereomer cis,anti-1 was prepared and cyclized using catalyst 9. The experimental product fingerprint was very similar to the calculated one, confirming the unique cis,anti-(AB)-4 as the main product of the reaction (Fig. 2b). This results also validated the use of calculated data to decode complex product fingerprints completely.In the trans series, pnictogen-bonding catalyst 9 again broke the Baldwin rules most efficiently (Fig. 2a). For all diastereomers, trans-(AA)-5 was observed as the main product with more than 75% yield. This exceptional selectivity was understandable considering the reactive intermediates V and VI after the endo-tet cyclization of ring 1 (Fig. 4b). Contrary to intermediates III and IV in the cis series, the methyl substituent at the ring junction is in axial position also with regard to ring 2. 1,3-Diaxial interactions of the approaching electrophile with this methyl thus hinder the formation of this ring 2 by an exo-tet cyclization. Presumably for this reason, the trans-fused bis-oxane products trans,anti-(AB)-4 and trans,syn-(AB)-4 were not observed. With Baldwin cyclizations hindered, endo-tet anti-Baldwin cyclizations occurred instead to afford the respective trans,anti-(AA)-5 and trans,syn-(AA)-5 with very high selectivity (Fig. 2a).The supramolecular capsules 8 applied to the trans series yielded two new products 6 and 7 (Fig. 2). Product 6 was identified by 2D NMR spectroscopy to be a hemiacetal cyclized on an anti-Baldwin ring 1 (Fig. S72^†). It exists in equilibrium with the open ketone form 12, which results in dynamic epimerization at the “anomeric center” (Fig. 2 and ​and4).4). Derivatization of hemiacetal 6 with aromatic hydrazines gave the respective hydrazones (Fig. S76 and S77^†). Product 7 was identified as an acyclic allyl alcohol extending from an anti-Baldwin ring 1 (Fig. 2 and S73–S75^†). Both new products might originate from intermediate VII, which is generated from substrate 1 by endo-tet cyclization of ring 1 and the opening of epoxide 2 to afford the tertiary carbocation (Fig. 4b). From intermediate VII, the formation of allyl alcohol 7 only requires a proton abstraction from one of the two adjacent methyl groups. Ketone 12 originates from the same intermediate VIIvia House-Meinwald rearrangement,¹⁵ that is a 1,2-hydride shift. Similar processes might occur with trans-diepoxide 1 to give an alternative cationic intermediate VIII, which can proceed through reverse cyclization (Fig. 1b) to give products 6 and 7. Stabilization of carbocations via cation–π interactions is a distinct feature of this type of capsules.^3,4The formation of these two new products in capsule 8 could be understood considering the inaccessibility of both AB products in the trans series, i.e., trans,syn-(AB)-4 and trans,anti-(AB)-4, with the explored catalysts (Fig. 4a). As already mentioned, the anti-Baldwin cyclization from trans,anti-1 and trans,syn-1 into intermediates V and VI with ring 1 is unproblematic, whereas continuation with exo-tet Baldwin cyclization of ring 2 is hindered by an axial methyl and, compared to the cis series, missing intramolecular activation of the nucleophile (Fig. 4b). With pnictogen-bonding catalyst 9, the solution was an alternative endo-tet anti-Baldwin cyclization into the trans-fused AA products 5, as discussed above (Fig. 2a and ​and4b).4b). In capsule 8, this endo-tet anti-Baldwin continuation of the cascade was not favorable. The reason for this distinctive selectivity within capsule 8 remains to be explored. In contrast to the other catalysts, the capsule may be able to stabilize cation VII better due to cation–π stabilization, making this pathway accessible.While the new oxanes 6 and 7 were obtained as main products from trans,anti-1 and trans,syn-1 with similar yields, the composition of the side products differed in the respective fingerprints (Fig. 2a). Cyclization of trans,syn-1 gave trans-(BB)-2 as the main side product, while trans,anti-1 gave trans,anti-(AA)-5 as the main side product. This difference was of interest because it could support that the cascade cyclizations might be interconnected, possibly concerted, at least in the present context.While capsules 8 excelled with access to new products in the trans series and pnictogen-bonding catalysts 9 with unique AB-BA selectivity on the level of diastereomers in the cis series, anion–π catalysts gave mostly Baldwin products like general Brønsted acid catalysis, independent of the stereochemistry of substrate 1 (Fig. 2). The largest deviation from Brønsted acid catalysis occurred with cis,anti-1, which gave a substantial percentage of cis-(BA)-3 and also a small amount of cis-(AB)-4 (Fig. 2a). The same trend, but less pronounced, was noted with the complementary trans,anti-1, which produced also small amounts of trans-(BA)-3 and trans-(AA)-5, formed instead of the inaccessible trans-(AB)-4 (see above, Fig. 2a).After investigation for anion transport, anion–π interactions have been introduced to catalysis in stabilizing anionic transition states on π-acidic surfaces.^8,10 Over the past decade, catalysts from hexafluorobenzene to π-stacked foldamers, fullerenes, carbon nanotubes, artificial enzymes have been applied to many reactions, including enolate, enamine, imine, Diels–Alder chemistry.⁸ Polyether cyclizations have been introduced as a cascade transformation that should benefit best from the delocalized nature of anion–π interactions.¹⁰ On π-acidic surfaces, polyether cyclizations were autocatalytic,¹⁰ a unique emergent property that has not been observed in the many studies with systems without anion–π interactions.¹¹With the privileged probe for supramolecular catalysis envisioned in this study, it was thus most interesting to assess the dependence of autocatalysis on the stereochemistry of the substrate. Significant dependence was conceivable considering the different products obtained from diastereomers of cis-1 with pnictogen-bonding catalyst 9 (Fig. 2a). Kinetics of all four test substrates converted with anion–π catalyst showed autocatalytic behavior (Fig. 5a and b). Moreover, autocatalysis was nearly independent of the stereochemistry of the substrate. This absence of diastereoselective autocatalysis was consistent with the computed model for transition-state stabilization by the product, and could explain why it is so difficult to achieve asymmetric autocatalysis on anion–π catalyst 10.¹³ Control experiments confirmed that general Brønsted acid catalysis does not show autocatalytic behavior, independent of the stereochemistry of substrate 1 (Fig. 5c and d).Open in a separate windowFig. 5Kinetics of the conversion of cis-1 (a and c, circles), cis,syn-1 (a and c, squares), trans-1 (b and d, circles) and trans,anti-1 (b and d, squares) with (a and b) anion–π catalyst 10 (10 mol%, rt) and (c and d) AcOH (500 mol%, 40 °C) in CD₂Cl₂, with hypothetical intermediate IX for autocatalysis on π-acidic surfaces.Taken together, the decoding of product fingerprints for cascade cyclizations that are simple enough to be tractable and complex enough to be interesting affords a privileged platform to characterize supramolecular catalysis. It is highly responsive to as many characteristics as possible, thus reporting on as many distinct advantages of the catalytic system as possible. The minimal substrate toolbox contains cis and trans di-epoxides as mixtures of syn–anti diastereomers, and at least one pure diastereomer. Most pairs of enantiomers are resolved in the chiral GC fingerprints. Applied to three model catalysts in comparison to general Brønsted acid catalysis, distinct fingerprints were found for all catalysts as well as for all different diastereomers of the substrate.In the cis series, most significant selectivity was observed with pnictogen-bonding catalysts, which give the unique AB product for anti and the more frequent BA product for the syn diastereomer of the diepoxide substrate with remarkably high selectivity. In the trans series, pnictogen-bonding catalysts broke the Baldwin rules most efficiently and independent of substrate stereochemistry, while within supramolecular capsules, completely new products were formed, including an interesting House–Meinwald rearrangement leading to cyclic hemiacetals. These distinct selectivities can be understood from the nature of the reactive intermediates. Together with particularly revealing details in the decoded product fingerprints, experimental support is obtained that the cascades are interconnected, possibly concerted. In clear contrast, anion–π catalysts gave mostly Baldwin products with fingerprints similar to general Brønsted acids. However, they showed unique autocatalytic behavior, a distinct emergent property that was independent of the stereochemistry of the substrate. All these distinctive characteristics found for representative supramolecular catalysts would be missed without the availability of decoded product fingerprints.These results thus validate the existence and significance of privileged substrate systems as general chemistry tools to characterize supramolecular catalysis. Once established, decoded polyether cascade fingerprints are very easy to use, ready to serve the community. For a new supramolecular catalyst to be characterized, the decoded fingerprints will reveal unique differences compared to controls. Importantly, because the system is hyperresponsive (Fig. 1a and ​and2a),2a), differences will be magnified. Due to the complexity required for hyperresponsiveness, the correlation of the fingerprint with the reactivity of a new catalyst will be mostly tentative and empirical at this point. For instance, AcOH-like fingerprints should reflect activation of epoxide opening to release the intramolecular leaving group, possibly supported by activation of the nucleophile as for autocatalysis on 10 (Fig. 5, IX). Fingerprints with more or even mostly A products should correlate with increasing S_N1-like behavior. However, the generation of mostly B products with AcOH implies that the activation of epoxide opening needs to be supported by stabilization of the resulting carbocation with, e.g., cation–π interactions to afford A products. With pnictogen-bonding catalyst 9, this would be meaningful on the π-basic tetrachlorocatecholate plane next to the σ hole stabilizing the alcoholate (Fig. 2d). In fingerprints with the new HM-rearrangement products, so far unique for capsules 8, the existence of carbocation intermediates is experimentally confirmed and thus presumably most relevant, due to cation–π interactions, confinement effects, or both. From here, with the system trained with more and more fingerprints, the correlation of fingerprint with mechanism of a new catalyst should become increasingly informative. Sooner or later, this will enable high-level computational simulations at high confidence,⁷ which in turn will enhance the information on reactivity available from fingerprints of new catalysts. According to preliminary results on the difference between pnictogen-bonding and Lewis acid catalysis⁷ and the elucidation of more complex supramolecular systems,¹⁶ these future perspectives are most promising.     

Formation of Quaternary Stereogenic Centers by NHC–Cu‐Catalyzed Asymmetric Conjugate Addition Reactions with Grignard Reagents on Polyconjugated Cyclic Enones

The copper‐catalyzed conjugate addition of various Grignard reagents to polyconjugated enones (dienone and enynone derivatives) is reported. The catalyst system, composed of copper triflate and an NHC ligand, led to the unusual selective formation of the 1,4‐addition products. This reaction allows for the creation of all‐carbon chiral quaternary centers with enantiomeric excesses up to 99 %. The remaining unsaturation on the 1,4 adducts give access to valuable synthetic transformations.     

A Non Homogeneous Riemann Solver for shallow water and two phase flows

In this work we consider a two steps finite volume scheme, recently developed to solve nonhomogeneous systems. The first step of the scheme depends on a diffusion control parameter which we modulate, using the limiters theory. Results on Shallow water equations and two phase flows are presented.     

Boron dipyrromethene dyes: a rational avenue for sensing and light emitting devices

Boron dipyrromethene dyes bearing nitro, amino, isocyanate and isothiocyanate functions were readily prepared under mild conditions. Various combinations allow to produce urea, diurea, thiourea, dithiourea in the 3, 4 and 5-substitution positions of the appended phenyl group. Condensation of the 3,4-substituted diamino derivative with 1,10-phenanthroline-5,6-dione and 6-formyl-2-methylpyridine allow to prepare dipyridophenazine and indole derivatives. The 3,5-dinitro-substituted indacene dye was characterized by an X-ray molecular structure showing a pronounced tilt angle of the dinitrophenyl group relative to the indacene core (approximately 84 degrees) whereas one nitro groups is basically coplanar with the phenyl ring and the second titled by approximately 21 degrees. The optical properties of these dyes reveals on/off switching of the fluorescence from the nitro to the amino compounds and further to the urea likely understood in the framework of an photoinduced electron transfer process.     

Crystal structure and magnetic properties of bis(2,2′-bipyridine) azido copper(II) perchlorate

The title compound has been synthesized and its crystal structure has been solved at room temperature. It crystallizes in the triclinic system, space groupP, witha=7.853(1) Å,b=10.177(1) Å,c=13.651(4) Å,=74.57(1)°,=88.49(1)°, =80.675(4)°, andZ=2. The structure consists of isolated [Cu(bipy)₂N₃]⁺ cations (bipy=2,2-bipyridine) and perchlorate anions. The metallic cation environment has a distorted trigonal-bipyramidal geometry. The EPR spectrum is rhombic, which indicates that the distortion with respect to the perfect trigonal bipyramid is sufficiently pronounced to mixz ²- andx ²–y ²-type orbitals in the ground state. The temperature dependence of the molar magnetic susceptibility has been investigated in the 300-2.2 K temperature range.     

Asymmetric allylic substitution catalyzed by C1-symmetrical complexes of molybdenum: structural requirements of the ligand and the stereochemical course of the reaction

Application of new chiral ligands (R)-(-)-12 a and (S)-(+)-12 c (VALDY), derived from amino acids, to the title reaction, involving cinnamyl (linear) and isocinnamyl (branched) type substrates (4 and 5 --> 6), led to excellent regio- and enantioselectivities (>30:1, < or =98 % ee), showing that ligands with a single chiral center are capable of high asymmetric induction. The structural requirements of the ligand and the mechanism are discussed. The application of single enantiomers of deuterium-labeled substrates (both linear 38 c and branched 37 c) and analysis of the products (41-43) by (2)H{(1)H} NMR spectroscopy in a chiral liquid crystal matrix allowed the stereochemical pathways of the reaction to be distinguished. With ligand (S)-(+)-12 c, the matched enantiomer of branched substrate was found to be (S)-5, which was converted into (R)-6 with very high regio- and stereoselectivity via a process that involves net retention of stereochemistry. The mismatched enantiomer of the branched substrate was found to be (R)-5, which was also converted into (R)-6, that is, with apparent net inversion, but at a lower rate and with lower overall enantioselectivity. This latter feature, which may be termed a "memory effect", reduced the global enantioselectivity in the reaction of the racemic substrate (+/-)-5. The stereochemical pathway of the mismatched manifold has been shown also to be one of net retention, the apparent inversion occurring through equilibration via an Mo-allyl intermediate prior to nucleophilic attack. Incomplete equilibration leads to the memory effect and thus to lower enantioselectivity. Analysis of the mismatched manifold over the course of the reaction revealed that the memory effect is progressively attenuated with the nascent global selectivity increasing substantially as the reaction proceeds. The origin of this effect is suggested to be the depletion of CO sources in the reaction mixture, which attenuates turnover rate and thus facilitates greater equilibrium. The linear substrate was also converted into the branched product with net syn stereochemistry, as shown by isotopic labeling. An analogous process operates in the generation of small quantities of linear product from branched substrate.