Characterization of Commercial Amylases for the Removal of Filter Cake on Petroleum Wells

Drilling fluid has many functions, such as carry cuttings from the hole permitting their separation at the surface, cool and clean the bit, reduce friction between the drill pipe and wellbore, maintain the stability of the wellbore, and prevent the inflow of fluids from the wellbore and form a thin, low-permeable filter cake. Filter cake removal is an important step concerning both production and injection in wells, mainly concerning horizontal completion. The drilling fluids are typically comprised of starch, the most important component of the filter cake. A common approach to remove this filter cake is the use of acid solutions. However, these are non-specific reactants. A possible alternative is the use of enzymatic preparations, like amylases, that are able to hydrolyze starch. Wells usually operate in drastic conditions for enzymatic preparations, such as high temperature, high salt concentration, and high pressure. Thus, the main objective of this work was to characterize four enzymatic preparations for filter cake removal under open hole conditions. The results showed that high salt concentrations (204,000 ppm NaCl) in completion fluid decreased amylolytic activity. All enzymatic preparations were able to catalyze starch hydrolysis at all temperatures tested (30, 65, 80, and 95 °C). An increase of amylolytic activity was observed with the increase of pressure (100, 500 and 1,000 psi) for one commercial amylase.     

A bound-improving approach to discrete programming problems

This note deals with the extension of the bound-improving sequence idea to general discrete programming problems.Corresponding author.     

Interaction of lectins withYersinia pestis strains

The ability of lectins to interact with Yersinia pestis strains isolated from rodent fleas and human biological fluids, obtained from different geographic areas, was examined. Lectins of Canavalia ensiformis, Ulex europaeus, Phaseolus vulgaris, and Triticum vulgaris, as well as a new autochthonous lectin of Swartzia pickellii of undefined specificity, were used. Most of the Y. pestis strains did not agglutinate with U. europaeus or C. ensiformis lectin. However, P. vulgaris lectin agglutinated suspensions of all the bacillus strains used. Fifteen of the 19 strains tested positive for assays using S. pickellii lectin. It is believed this is the first report of Y. pestis strain agglutination by lectins. A similar agglutination pattern was obtained for lectins with specificity for oligosaccharides containing N-acetylglucosamine and S. pickellii lectin, which did bind to the affinity matrix chitin, a polysaccharide of N-acetylglucosamine. The use of bacterial strains and commercial lectins of defined specificity may be an approach to providing evidence about the lectin binding sites of undefined monosaccharide specificity.     

Environmental inversion using high-resolution matched-field processing

This paper considers the inversion of experimental field data collected with light receiving systems designed to meet operational requirements. Such operational requirements include system deployment in free drifting configurations and a limited number of acoustic receivers. A well-known consequence of a reduced spatial coverage is a poor sampling of the vertical structure of the acoustic field, leading to a severe ill-conditioning of the inverse problem and data to model cost function with a massive sidelobe structure having many local extrema. This causes difficulties to meta-heuristic global search methods, such as genetic algorithms, to converge to the true model parameters. In order to cope with this difficulty, broadband high-resolution processors are proposed for their ability to significantly attenuate sidelobes, as a contribution for improving convergence. A comparative study on simulated data shows that high-resolution methods did not outperform the conventional Bartlett processor for pinpointing the true environmental parameter when using exhaustive search. However, when a meta-heuristic technique is applied for exploring a large multidimensional search space, high-resolution methods clearly improved convergence, therefore reducing the inherent uncertainty on the final estimate. These findings are supported by the results obtained on experimental field data obtained during the Maritime Rapid Environmental Assessment 2003 sea trial.     

Automated two-dimensional separation flow system with electrochemical preconcentration, stripping, capillary electrophoresis and contactless conductivity detection for trace metal ion analysis

This paper describes the automation of a fully electrochemical system for preconcentration, cleanup, separation and detection, comprising the hyphenation of a thin layer electrochemical flow cell with CE coupled with contactless conductivity detection (CE-C?D). Traces of heavy metal ions were extracted from the pulsed-flowing sample and accumulated on a glassy carbon working electrode by electroreduction for some minutes. Anodic stripping of the accumulated metals was synchronized with hydrodynamic injection into the capillary. The effect of the angle of the slant polished tip of the CE capillary and its orientation against the working electrode in the electrochemical preconcentration (EPC) flow cell and of the accumulation time were studied, aiming at maximum CE-C?D signal enhancement. After 6 min of EPC, enhancement factors close to 50 times were obtained for thallium, lead, cadmium and copper ions, and about 16 for zinc ions. Limits of detection below 25 nmol/L were estimated for all target analytes but zinc. A second separation dimension was added to the CE separation capabilities by staircase scanning of the potentiostatic deposition and/or stripping potentials of metal ions, as implemented with the EPC-CE-C?D flow system. A matrix exchange between the deposition and stripping steps, highly valuable for sample cleanup, can be straightforwardly programmed with the multi-pumping flow management system. The automated simultaneous determination of the traces of five accumulable heavy metals together with four non-accumulated alkaline and alkaline earth metals in a single run was demonstrated, to highlight the potentiality of the system.     

Protein unfolding studied by fluorescence methods and electrical impedance spectroscopy: the cases of Cratylia mollis and Concanavalin A

This work is dedicated to the investigation of the prevailing molecular interactions between Cratylia mollis (Cramoll) and Concanavalin A (Con A) lectins and ionic (sodium dodecylsulfate, SDS) and non-ionic (Triton X-100, TX-100) surfactants, where we have used electrical impedance spectroscopy to map the dielectric characteristics of mixed lectin/surfactant solutions. The disorder induced in the lectin conformation is proportional to the extent of the access of the surfactant to the fluorophore present in the protein, resulting in its progressive unfolding. The complete unfolding of the lectin is associated to the formation of micelles in the core of the protein, each one of them containing a large number of detergent molecules, and therefore the process can be accompanied by measuring the electrical response of the binary surfactant/lectin system. For instance, the change in the real part of the impedance as a function of the relative concentration of the surfactant in the binary solution exhibits a breaking in its linear behavior that can be taken as indicative of a qualitative change in the environment surrounding the protein residue. We consider these results strong evidence in favor of using impedance spectroscopy methods for the analysis of protein-surfactant associations and for the characterization of the interactions that must prevail when the protein unfolds as the relative surfactant concentration is increased in aqueous solutions of these binary systems.     

Combining electrophoresis with detection under ultraviolet light and multiple ultrafiltration for isolation of humic fluorescence fractions

Polyacrylamide gel electrophoresis of chernozem soil humic acids (HAs) followed by observation under UV (312 nm) excitation light reveals new low molecular weight (MW) fluorescent fractions. Ultrafiltration of HAs sample in 7 M urea on a membrane of low nominal MW retention (NMWR, 5 kDa) was repetitively used for separation of fluorescent and non-fluorescent species. Thirty ultrafiltrates and the final retentate R were obtained. Fluorescence maxima of separate ultrafiltrates were different and non-monotonously changed in the range of 475–505 nm. Fluorescence maxima of less than 490 nm were detected only in the four first utrafiltrates. For further physical–chemical analyses all utrafiltrates were combined into a fraction called UF < 5 (NMW < 5 kDa). Retentate R demonstrated very weak fluorescence under 270 nm excitation, while fluorescence intensity of UF < 5 was about six times higher than of the bulk HAs. Fraction UF < 5 was further ultrafiltrated on membranes of MNWR 3 kDa and 1 kDa, yielding three subfractions UF3-5, UF1-3 and UF < 1 with NMW 3–5 kDa, 1–3 kDa and <1 kDa, respectively. The validation of the UF procedure was performed by size exclusion chromatography on Sephadex G-25 column. The fluorescence maxima were found to be at 505, 488 and 465 nm for UF3-5, UF1-3 and UF < 1, respectively, with increasing of fluorescence intensity from UF3-5 to UF1-3 to UF < 1 fraction. EPR analysis showed that the amount of free radicals was the largest in retentate R and drastically decreased in fluorescent ultrafiltrates. The results demonstrate that more than one fluorophore is present in chernozem soil HAs complex.     

A hybrid shuffled complex evolution approach based on differential evolution for unconstrained optimization

Numerous optimization methods have been proposed for the solution of the unconstrained optimization problems, such as mathematical programming methods, stochastic global optimization approaches, and metaheuristics. In this paper, a metaheuristic algorithm called Modified Shuffled Complex Evolution (MSCE) is proposed, where an adaptation of the Downhill Simplex search strategy combined with the differential evolution method is proposed. The efficiency of the new method is analyzed in terms of the mean performance and computational time, in comparison with the genetic algorithm using floating-point representation (GAF) and the classical shuffled complex evolution (SCE-UA) algorithm using six benchmark optimization functions. Simulation results and the comparisons with SCE-UA and GAF indicate that the MSCE improves the search performance on the five benchmark functions of six tested functions.     

Multi-mode resource-constrained project scheduling using RCPSP and SAT solvers

This paper reports on a new solution approach for the well-known multi-mode resource-constrained project scheduling problem (MRCPSP). This problem type aims at the selection of a single activity mode from a set of available modes in order to construct a precedence and a (renewable and non-renewable) resource feasible project schedule with a minimal makespan. The problem type is known to be NP-hard and has been solved using various exact as well as (meta-)heuristic procedures.The new algorithm splits the problem type into a mode assignment and a single mode project scheduling step. The mode assignment step is solved by a satisfiability (SAT) problem solver and returns a feasible mode selection to the project scheduling step. The project scheduling step is solved using an efficient meta-heuristic procedure from literature to solve the resource-constrained project scheduling problem (RCPSP). However, unlike many traditional meta-heuristic methods in literature to solve the MRCPSP, the new approach executes these two steps in one run, relying on a single priority list. Straightforward adaptations to the pure SAT solver by using pseudo boolean non-renewable resource constraints has led to a high quality solution approach in a reasonable computational time. Computational results show that the procedure can report similar or sometimes even better solutions than found by other procedures in literature, although it often requires a higher CPU time.