Effect of Calcium Ion Concentration on Small Molecule Desorption from Alginate Beads

Spherical alginate beads were prepared by ionotropic gelation of sodium alginate through the use of calcium ions. Pyranine (Py) was added to the alginate solution as a small molecule probe for fluorescence studies. Desorption of Py in water from the alginate beads cross-linked with calcium ions was studied by using the steady state fluorescence technique. The fluorescence emission intensity (I) from Py was monitored during the desorption process at 512 nm using the time drive mode of the spectrofluorometer. The increase in I was attributed to Py release from the beads. The Fickian diffusion model was used to calculate the desorption coefficients, D_, which were found to be increased up to 3% (w/v) CaCl₂ concentration in the beads, and then decreased with a further increase of CaCl₂ content. On the other hand, the encapsulation efficiency of Py in the calcium alginate beads presented the reverse behavior compared to D. It was observed that, when the content of CaCl₂ was increased, the incubation time, t_0, for the start of desorption increased.     

Thermal stability of corrugated epitaxial graphene grown on Re(0001)

We report on a novel approach to determine the relationship between the corrugation and the thermal stability of epitaxial graphene grown on a strongly interacting substrate. According to our density functional theory calculations, the C single layer grown on Re(0001) is strongly corrugated, with a buckling of 1.6 ?, yielding a simulated C 1s core level spectrum which is in excellent agreement with the experimental one. We found that corrugation is closely knit with the thermal stability of the C network: C-C bond breaking is favored in the strongly buckled regions of the moiré cell, though it requires the presence of diffusing graphene layer vacancies.     

An unusual case of acute disseminated encephalomyelitis confined to brainstem

Acute disseminated encephalomyelitis (ADEM) is an immune-mediated demyelinating disorder usually encountered in children or adolescents and characterized by multifocal neurological deficits of rapid onset. Typical target areas of demyelination include the corona radiata, centrum semiovale, periventricular white matter, cerebellar peduncles and brainstem. Involvement of deep gray matter nuclei is also frequent. We report a 6-year-old boy with ADEM who had only brainstem involvement. Serial magnetic resonance images representing the stage of disease and response to steroid treatment are presented.     

热等静压对NbTi/Cu多芯超导线加工过程的影响

采用传统方法生产的NbTi/Cu多芯超导线在生产芯数较多的超导线时存在填充系数较大的问题,这直接影响了芯丝的整齐排布,所以组装完成后加入热等静压过程.研究了经过热等静压和未经过热等静压的NbTi/Cu多芯超导线的加工性能.经过试验证明,经过100～150MP,2小时热等静压处理的NbTi/Cu多芯超导线坯锭在加工过程中具有良好的加工性能,提高了超导线复合坯锭的成品率;而未经过热等静压处理的NbTi/Cu多芯超导线坯锭加工性能较差,坯锭内部缺陷较多.     

Utilization of Fly Ash Nanofluids in Two-phase Closed Thermosyphon for Enhancing Heat Transfer

This study investigates how fly ash nanofluids affect the thermal performance of a two-phase closed thermosyphon at various states of operation. The utilization of nanofluids obtained from X₂O₃-type oxides, such as Al₂O₃, Fe₂O₃, or CuO, on the improvement of two-phase closed thermosyphon performance was reported in a number of studies in the literature. The present study experimentally demonstrated the effect of using a nanofluid obtained from fly ash comprised of various types of metal oxides in varying ratios on improving the performance of a two-phase closed thermosyphon. The fly ash was obtained from the flue gas that was captured in the cyclones of the Yatagan thermal power plant (Turkey). Triton X-100 (Dow Chemical Company) dispersant was used in the study to produce the 0.2% (wt) fly ash/water nanofluid via direct synthesis. A straight copper tube with an inner diameter of 13 mm, outer diameter of 15 mm, and length of 1 m was used as the two-phase closed thermosyphon. The nanofluid filled 33.3% (44.2 ml) of the volume ofthe two-phase closed thermosyphon. Three heating power levels (200, 300, and 400 W) were used in the experiments with three different flow rates of cooling water (5, 7.5, and 10 g/s) used in the condenser for cooling the system. A increase of 26.39% was achieved in the efficiency of the two-phase closed thermosyphon when 4% (wt) fly ash containing nanofluid was used to replace deionized water at a heat load of 200 W and with a cooling water flow rate of 5 g/s.     

Empirical,Semi-Empirical and Experimental Determination of K X-Ray Fluorescence Parameters of Some Elements in the Atomic Range 21 ≤ Z ≤ 30

In this study, the semi-empirical and empirical calculations of K X-ray intensity ratios, K-shell fluorescence yields, and vacancy transfer probabilities have been performed for 3d transition elements. Also, σ_Kα, σ_Kβ production cross-sections, K_β/K_α intensity ratios, ω_K fluorescence yields, and η_KL vacancy transfer probabilities of 3d transition elements have been measured. The samples were excited by 59.5 keV γ-rays from a ²⁴¹Am annular radioactive source. K X-rays emitted by samples were counted by an Ultra-LEGe detector with a resolution of 150 eV at 5.9 keV.     

Phase transitions and metastable states in TlGaSe2

The results of measurements of the dielectric constant of TlGaSe₂ in temperature range of successive phase transitions are presented. An anomaly in the temperature dependence of the real part of dielectric constant in TlGaSe₂ has been observed at about 242?K in addition to anomalies at 115, 108, and also near 65?K as reported in previous publications. The presence of temperature hysteresis effects in temperature interval between 115 and 242?K allowed making a conclusion about possible existence of an incommensurate phase in the mentioned temperature range. A model of succession of the structural phase transitions in TlGaSe₂ has been suggested.     

Improvements of Tolerance to Stress Conditions by Genetic Engineering in Saccharomyces Cerevisiae during Ethanol Production

Saccharomyces cerevisiae, industrial yeast isolate, has been of great interest in recent years for fuel ethanol production. The ethanol yield and productivity depend on many inhibitory factors during the fermentation process such as temperature, ethanol, compounds released as the result of pretreatment procedures, and osmotic stress. An ideal strain should be able to grow under different stress conditions occurred at different fermentation steps. Development of tolerant yeast strains can be achieved by reprogramming pathways supporting the ethanol metabolism by regulating the energy balance and detoxicification processes. Complex gene interactions should be solved for an in-depth comprehension of the yeast stress tolerance mechanism. Genetic engineering as a powerful biotechnological tool is required to design new strategies for increasing the ethanol fermentation performance. Upregulation of stress tolerance genes by recombinant DNA technology can be a useful approach to overcome inhibitory situations. This review presents the application of several genetic engineering strategies to increase ethanol yield under different stress conditions including inhibitor tolerance, ethanol tolerance, thermotolerance, and osmotolerance.     

Synthesis of nanometric β-barium metaborate powder from different borate solutions by ultrasound-assisted precipitation

In this study, the synthesis of barium metaborate powder (BaB₂O₄) was carried out by ultrasound-assisted precipitation using different borate solutions. Different solutions such as borax (Na₂B₄O₇, BD), boric acid (H₃BO₃, BA), and sodium metaborate (NaBO₂, SMB) were used in the synthesis and an ultrasonic immersion horn probe was used as the major source of ultrasound. The effect of reaction temperature and time, pH, and crystallization time on the BaB₂O₄ yield (%) was investigated. The ultrasound-assisted synthesis up to 90 % yield could be achieved using a 0.2 M BD solution at 80 °C, reacting for 5 min at pH 13 followed by 2 h of crystallization. Following crystallization, the obtained powder was heated up to 140, 250, 650, and 750 °C for 2.5 h, and it was shown that β-BaB₂O₄ nanometric powders were obtained after the 750 °C heat treatment.     

On the possible connection between renormalization-groups and nonlinear semi-groups

Some algebraic properties of the renormalization-group (RNG) are studied using the nonlinear semi-group theory. The RNG is defined in an axiomatic manner as a bounded nonlinear semi-group on an abstract Banach space. Perturbations of the fixed point of RNG and the problem of marginality are investigated using a hierarchy of nonlinear semi-groups.