Derivative spectrophotometric determination of nickel using Br-PADAP

A major problem with spectrophotometric methods for nickel is cobalt interference, because many of the reagents for nickel also react with cobalt. In this work, the interference of cobalt in the determination of nickel using 2-(5-bromo-2-pyridylaxo)-5-diethylaminophenol (Br-PADAP) was eliminated by the use of derivative spectrophotometry, using the zero-crossing method for evaluation of the derivative signal. Br-PADAP reacts with nickel(II) in the presence of Triton X-100 to form a red complex with absorption maxima at 530 and 562 nm. The reactions parameters and the conditions for the measurements of the first-derivative signal were studied and the results demonstrated that using the derivative technique, Br-PADAP can be used for nickel determination with a selectivity higher than that of ordinary spectrophotometry and with a limit of detection of 0.2 ng ml(-1). The pH should be in the range 5.0-6.0 using an acetate buffer. The determination of nickel in the presence of cobalt was performed with conventional and derivative procedures, and the results demonstrated that only the derivative method should be used and, of the methods used for evaluation of the derivative signal, the zero-crossing method is the best. The proposed procedure was used for nickel determination in steels standards. The results demonstrated that the procedure has satisfactory accuracy and precision. Cobalt interference can be also eliminated by using dual-wave-length spectroscopy.     

Chemometric interpretation of pesticide occurence in soil samples from an intensive horticulture area in north Portugal

An extensive monitoring programme of pesticides was carried out in soil samples from an intensive horticulture area in north of Portugal, putting into practice the needs for increased control of soil quality as far as organic pollution is concerned. The area under investigation was additionally defined as vulnerable to nitrates due to local soil and aquifer characteristics, which might be extended to pesticides contamination. Five sampling sites were selected and soils analysed at three depths in eight sampling campaigns, for the period of 2 years. A stepwise multivariate statistical approach was selected to uncover most relevant patterns inside a complex environmental data matrix. Cluster analysis was applied both to group pesticides and samples, giving a primary and unsupervised overlook of privileged relationships. Clusters of persistent pesticides and selected herbicides were identified, whereas sample classes were also formed and disposed geographically. Thirty eight percent of analysed soils samples fell into one class characterized by low contamination (class 1 in cluster analysis), which is entirely representative of the sampling site no. 1. Afterwards, linear discriminant analysis was applied to identify those pesticides, which had a higher impact in the definition of classes. Finally, factor analysis using a five component model was implemented in order to bring to light the constitution and data variance explained by each of the five main principal components, as well as, their relation to pest management practices. A factor was identified (PC1 – 22% variance) composed of chlorinated pesticides, which was representative of one of the investigated sites indicating its high contamination status. Qualitative main findings and class average concentration values were obtained through this multivariate statistical approach.     

Transuranic elements alpha-particle energy analysis using nuclear track in solids methodology

This paper presents a method for the energy analysis of alpha-particles emitted by transuranic elements via a novel technique using Nuclear Tracks. The method is based on the relationship between the energy deposited in the detection material and the diameter of the track, that is formed by chemical etching. The method involves CR-39 polycarbonate as the detector material, one-step chemical etching after irradiation, and a digital image analysis system for automatic reading of the track diameters. The experimental study included alpha-particles in the energy range 5.1 MeV to 5.8 MeV emitted by²³⁹Pu,²⁴¹Am and²⁴⁴Cm. The quantitative results provide a clear signature to identify each one of the emitters based on a characteristic track diameter.     

A short and efficient enantioselective route to a key intermediate for the total synthesis of forskolin

A simple route for the enantioselective synthesis of key intermediates (11 and 12) for the total synthesis of forskolin has been developed starting from acid 6 and (S)-alcohol 5. The latter is prepared by enantioselective catalytic CBS reduction of dienone 3, and is converted by an intramolecular Diels-Alder reaction to tricyclic lactone 9.     

A more convenient and general procedure for O-monobenzylation of diols via stannylenes: a critical reevaluation of the Bu2SnO method

A more consistent, straightforward, and economical protocol for generation of stannylene species and their reaction with BnBr leading to products of O-monobenzylation of diols has been set. It has shown to be specially indicated for substrates bearing vicinal trans 1,2-diol moieties on cyclohexane backbones, which are more resistant to these transformations. Such protocol has been successfully applied to myo-inositol derivatives and acyclic diols.     

Selective determination of copper with pyridoin phenylhydrazone as chromogenic extraction reagent

Summary The synthesis, characteristics and analytical applications of pyridoin phenylhydrazone are described. It reacts with copper(I) to produce an orange 11 complex ( _max=450 nm,=2.1×10⁴l· mole^–1·cm^–1) in aqueous ethanolic solution; it behaves as a cuproin type reagent. The orange complex can be extracted into amyl alcohol ( _max=440 nm,=2.0×10⁴l·mole^–1·cm^–1), and used for the spectrophotometric determination of trace amounts of copper. Interferences have been investigated.

---

Zusammenfassung Synthese, Eigenschaften und analytische Anwendung von Pyridoin-phenylhydrazon wurden beschrieben. Es reagiert mit Cu(I) unter Bildung eines orange gefärbten 11-Komplexes in wäßrig-alkoholischer Lösung ( _max=450 nm,=2,1×10⁴l·mol^–1·cm^–1); das Reagens verhält sich ähnlich wie Cuproin. Der erwähnte Komplex läßt sich mit Amylalkohol extra-hieren ( _max=440 nm,=2,0×10⁴l·mol^–1·cm^–1) und zur spektrophoto-metrischen Bestimmung von Kupferspuren benützen. Auftretende Störungen wurden angegeben.

     

A new production method for carrier-free201Tl using IEN'S cyclotron in Rio De Janeiro

A new and simplified method was developed for the separation of thallium 201 which will allow the shipment of a “one shot generator” to distant places and easy elution at the destination. Thallium is produced as usually, through the reaction $${}^{nat}Tl/p,xn/^{201} pb\xrightarrow{{\beta ^ + }}{}^{201}Tl$$ with 24-MeV protons from IEN'S CV-28 cyclotron. The separation is based on the properties of a chelating carboxylic acid cation exchange resin column which at pH 4.5 retains lead while thallim is easily eluted. This column can also be used as a regular generator to produced greater quantities of²⁰¹Tl but at the expense of more elutions.     

3β‐(Stearyloxy)olean‐12‐ene from Austroplenckia populnea: Structure Elucidation by 2D‐NMR and Quantitative 13C‐NMR Spectroscopy

3β‐(Stearyloxy)olean‐12‐ene was isolated from a hexane extract of Austroplenckia populnea Reiss (Celastraceae) leaves. The structure was solved by means of quantitative ¹³C‐NMR, HMBC, HMQC, COSY, NOESY, and NOE difference spectra. The mass spectrum showed an [M+1]⁺ ion peak at m/z 693, and the molecular formula C₄₈H₈₄O₂ was confirmed by combustion analysis.     

Temperature-induced gelation of concentrated silicon carbide suspensions

Due to the steric barrier provided by the adsorption of the dispersant hypermer KD1 (a polyester/polyamine condensation polymer), stable and low-viscosity suspensions of SiC, Y(2)O(3), and Al(2)O(3) powder mixtures could be prepared in methyl ethyl ketone (MEK)/ethanol (E) solvent with solids loading as high as 60 vol%. The solvency of the dispersant in MEK/E decreased dramatically on cooling. Steady shear viscosity and oscillatory measurements were performed as a function of temperature for suspensions with different solids loading. The viscosity and elastic modulus of suspension increased with decreasing temperature and became more sensitive with the increase of solids loading. The suspensions with solids loading higher than 40 vol% could be solidified with decreasing temperature, but gelation temperature and gelation stiffness decreased with decreasing solids loading. The 60 vol% solid-loaded suspension was a stable and free-flowing fluid at 20 degrees C and gradually transformed to a very highly viscous and elastic system upon cooling to about 13 degrees C. Complete solidification occurred when the temperature was decreased to 5 degrees C. The gelation mechanism was mainly based on the collapse of the adsorbed layer as the temperature decreases, which induced incipient flocculation and formed a stiff network. The gelled body was further strengthened by separation of the dispersant from the suspension.     

Theoretical study of p‐methacryloyl‐aminophenylarsonic acid

Conformations of p‐methacryloylaminophenylarsonic acid (p‐MAPHA) are determined through molecular mechanics and DFT/B3LYP calculations. Solvation effects are studied within the self‐consistent isodensity continuum model (SCI‐PCM). The stationary points were found to correspond to minima as verified by the analysis of vibrational frequencies in the molecule. The molecular optical absorption was obtained by using different solvent environments. The present results are in good agreement with the available experimental data. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002