Isolation and characterization of cellulose nanofibers from banana peels

Cellulose nanofibers were isolated from banana peel using a combination of chemical treatments, such as alkaline treatment, bleaching, and acid hydrolysis. The suspensions of chemically treated fibers were then passed through a high-pressure homogenizer 3, 5, and 7 times, to investigate the effect of the number of passages on the properties of the resulting cellulose nanofibers. The cellulose nanofibers isolated in this study had a dry basis yield of 5.1 %. Transmission electron microscopy showed that all treatments effectively isolated banana fibers in the nanometer scale. The micrographs of the process steps used to isolate the nanofibers revealed gradual removal of amorphous components. Increasing number of passages in the homogenizer shortened the cellulose nanofibers while furnishing more stable aqueous suspensions with zeta potential values ranging from ?16.1 to ?44.1 mV. All the samples presented aspect ratio in the range of long nanofibers, hence being potentially applicable as reinforcing agents in composites. X-ray diffraction studies revealed that homogenized nanofiber suspensions were more crystalline than non-homogenized suspensions. Fourier transform infrared spectroscopy confirmed that alkaline treatment and bleaching removed most of the hemicellulose and lignin components present in the banana fibers. Thermal analyses revealed that the developed nanofibers exhibit enhanced thermal properties. In general, the nanoparticles isolated from the banana peel have potential application as reinforcing elements in a variety of polymer composite systems.     

Potentiometric, luminescence and NMR study of the interaction of Eu with glyceryl phosphates

Complexation of europium(III) with glyceryl-1- and -2-phosphates has been studied by metal ion luminescence, ¹H and ¹³C NMR spectroscopy and potentiometry. From the luminescence and NMR studies, the formation of a 1:1 inner-sphere complex, in which the glyceryl phosphate is directly bound to the metal, is confirmed. Similar apparent binding constants at pH 2 were obtained by the three methods. Values obtained by NMR at pH 2 are 53 M⁻¹ and 12 M⁻¹ for glyceryl-1- and -2-phosphate, respectively. By comparison with literature data on related systems it is suggested that the ligands bind through the phosphate group. To obtain structural information from the NMR data, complexation has also been studied with the lanthanide ions Dy(III), Er(III) and Gd(III) using both chemical shift and relaxation data. From this, metal-proton distance ratios have been calculated. Comparison of ¹H and ¹³C NMR spectral data in the presence of paramagnetic lanthanides suggests conformational equilibria in the solutions. From the potentiometric studies, global formation constants have been determined, and speciation diagrams obtained over the pH range 1.5pH7.0 for ligand/metal ratios of 1 and 30. Implications of these results on lanthanide induced fusion of phospholipid membranes are discussed.     

Nickel determination in osteoblast-like cell culture medium by adsorptive cathodic stripping voltammetry with a mercury microelectrode

The purpose of this study is to investigate the influence of nickel, which is an alloying element in commonly used metallic biomaterials, on the biomaterials mineralization process. An electrochemical method was developed to quantify this metal ion in osteoblast-like cell culture medium (OST) by performing adsorptive cathodic stripping voltammetry (CSV) with dimethylglyoxime (DMG) at a mercury film microelectrode (MFM). The optimized analytical conditions and the square-wave CSV parameters for the analysis are: DMG concentration: 5.00 × 10⁻⁴ mol L⁻¹; ammonium chloride buffer: 0.10 mol L⁻¹ (pH 9.2); frequency: 50 Hz, amplitude 20 mV; step: 2 mV; adsorption time: 10 s, deposition potential: −0.70 V and reduction potential: −1.20 V. The limit of detection was 7.70 × 10⁻⁹ mol L⁻¹ for an adsorption time of 10 s. The results achieved by CSV using the MFM were compared to those obtained by atomic absorption spectrometry (AAS) to ensure the reliability of the electrochemical method. The mineralization process was evaluated by biochemical and histochemical assays.     

Application of linear regression analysis for iron and copper removal process using natural zeolites

Natural zeolites (zeolitic volcanic tuffs) cropped out from three regions of Transilvania, Vultureni (V), Pagli?a (P) and M?cica? (M), were evaluated in the process of iron (V, P, M) and copper (M) removal from wastewaters. Iron and copper removal process was studied using a fixed bed column, when equilibrium and kinetic data were acquired. Four isotherms, Langmuir, Freundlich, Langmuir?CFreundlich and Redlich?CPeterson, were used to fit the experimental data obtained for each natural zeolite sample. Parameters of the adsorption isotherms were estimated from the experimental equilibrium data using MATLAB. Using these data the best fit with one of the chosen isotherm can be found. Isotherm constants were determined by linear regression analysis of the experimental data. We concluded that the mathematical model based on Freundlich isotherm is the most appropriate to describe the iron and copper exchange on our natural zeolite samples.     

UV degradation of deoxyribonucleic acid

The effects of UV synchrotron radiation on deoxyribonucleic acid (DNA) cast films have been systematically investigated by vacuum ultraviolet and infrared spectrophotometry as a function of irradiation time. Cast DNA films exposed at 140 nm (8.85 eV) for different irradiation times, revealed consistent changes in their VUV spectra which indicate a decrease of thymine groups and an increase of π → π* transition spectral signature associated with the CO group of the open sugar chain. This result was corroborated by a decrease in CO stretching vibration at 1061 cm⁻¹ observed in the infrared spectra. Both these results are consistent with the creation of single strand breaks in the deoxyribose component of DNA molecule and a decrease in the phosphate groups. It was also shown that UV radiation is effective in damaging the thymine groups involved in Hoogsteen base pairing with adenine. The analysis of the infrared data suggests that the usual spectroscopic fingerprints of DNA denaturation are not necessarily a reliable measure of DNA damage.     

Mn(II) azamacrocyclic bromide complexes with different nuclearities

The coordination behaviour of a series of pyridyl azamacrocyclic ligands, some of them containing cyanomethyl and cyanoethyl pendant-arms, towards Mn(II) ion was studied. All the complexes were characterized by microanalysis, LSI mass spectrometry, IR, UV-Vis spectroscopy and magnetic measurements. Crystal structures of [MnL¹][MnBr₄] (1), [MnL³][MnBr₄] · 2CH₃CN (3), [Mn₂L⁵Br₄] · 2CH₃CN (5) and [Mn₂L⁶Br₄] (6) complexes have been determined. The X-ray studies show the presence of an ionic mixed octahedral-tetrahedral complex for 1 and 2, with the manganese ion of the cation complex, endomacrocyclicly coordinated by the six nitrogen donor atoms from the macrocyclic backbone in a distorted octahedral geometry. Instead, the complexes 5 and 6 are dinuclear, and both manganese ions are coordinated by one pyridinic and two amine nitrogen atoms from the macrocyclic backbone and two bromide ions, being the geometry around the metal better described as distorted square pyramidal. In all cases, the nitrile pendant-arms do not show coordination to the metal ion.     

Mullite crystallization using fully hydrolyzed silica sol: the gelation temperature influence

Mullite is an aluminosilicate widely used as a structural material for high temperature applications. This paper studies the effect of the gelation temperature on the synthesis of two mullite precursors: polymeric and colloidal silica, using both in fully-hydrolyzed silica sol, derived from sodium silicate. The gels were synthesized using aqueous silicic acid and aluminum nitrate. Ethylene glycol was added into polymeric gels. Two gelation temperatures were used: 80 and 100 °C. In the polymeric precursor, the increasing of the gelation temperature caused an increase in the silica incorporation inside the mullite crystalline lattice at 1,000 °C, and it also generated an increase in the reaction extent at all calcination temperatures. In the colloidal precursors, these effects were more intense than in the polymeric precursors in terms of yield. Colloidal samples calcined at 1,250 °C crystallized cristobalite and alpha alumina in addition to mullite when they were previously gelled at 80 °C. On the other hand, the same sample gelled at 100 °C led to only crystallized mullite. The reaction extent increased by more than 20 % for colloidal samples gelled at 100 °C compared to colloidal samples gelled at 80 °C (calcined at 1,250 °C). This increase was due to the almost total incorporation of alumina and silica in the crystalline lattice of mullite.     

Microspheres of Mixed Proteins

This paper describes the synthesis of mixed proteinaceous microspheres (MPMs) by the sonochemical method. The current fundamental research follows the research of Suslick and co‐workers who have developed a method by which high‐intensity ultrasound is used to make aqueous suspensions of proteinaceous microcapsules filled with water‐insoluble liquids. 1 By using high‐intensity ultrasound, we have synthesized microspheres made of a few different proteins. The three proteins used in the current experiments are bovine serum albumin (BSA), green fluorescent protein (GFP), and cyan fluorescent protein–glucose binding protein–yellow fluorescent fused protein (CFP‐GBP‐YFP). The two synthesized microspheres made of mixed proteins are BSA‐GFP and BSA‐(CFP‐GBP‐YFP). This paper presents the characterization of the sonochemically produced microspheres of mixed proteins. It also provides an estimate of the efficiency of the sonochemical process in converting the native proteins to microspheres.     

Hydroxyl Radical Generation and DNA Nuclease Activity: A Mechanistic Study Based on a Surface‐Immobilized Copper Thioether Clip‐Phen Derivative

Coordination compounds of copper have been invoked as major actors in processes involving the reduction of molecular oxygen, mostly with the generation of radical species the assignment for which has, so far, not been fully addressed. In the present work, we have carried out studies in solution and on surfaces to gain insights into the nature of the radical oxygen species (ROS) generated by a copper(II) coordination compound containing a thioether clip‐phen derivative, 1,3‐bis(1,10‐phenanthrolin‐2‐yloxy)‐N‐(4‐(methylthio)benzylidene)propan‐2‐amine (2CP‐Bz‐SMe), enabling its adsorption/immobilization to gold surfaces. Whereas surface plasmon resonance (SPR) and electrochemistry of the adsorbed complex indicated the formation of a dimeric Cu^I intermediate containing molecular oxygen as a bridging ligand, scanning electrochemical microscopy (SECM) and nuclease assays pointed to the generation of a ROS species. Electron paramagnetic resonance (EPR) data reinforced such conclusions, indicating that radical production was dependent on the amount of oxygen and H₂O₂, thus pointing to a mechanism involving a Fenton‐like reaction that results in the production of OH^..