The First VOPO4·2H2O Intercalation Compound Synthesized through a Solid-State Reaction at Room Temperature

This communication reports the first intercalation into VOPO₄·2H₂O performed through a solid-state reaction at room temperature. Ethyleneurea, EU (2-imidazolidone) was intercalated into the oxovanadium phosphate by grinding in a mortar stoichiometric amounts of both reagents at room temperature for 30 min. C, H and N elemental analyses of the obtained intercalation compound gave the formula VOPO₄·(EU)·H₂O. The profile of the absorption bands due to the VOPO₄ lattice vibration around 1000 cm⁻¹ was retained after reaction, providing evidence that an intercalation compound and not merely a salt of V-P-O species was produced. For α-VOPO₄·2H₂O, the interlayer distance is 0.75 nm, whereas for the EU inter-calation compound it is 0.95 nm. The obtained SEM micrographs show that the microstructure of VOPO₄·2H₂O is changed after reaction, with a total exfoliation of the oxovanadium matrix.     

Determination of Benzo[a]pyrene in smoking-flavour agents (water-soluble liquid smoke) by second derivative constant-wavelength synchronous spectrofluorimetry

We have developed a simple, rapid, inexpensive method for the determination of benzo[a]pyrene (BP, a known carcinogen) in smoking-flavour agents (water-soluble liquid smoke; WSLS). After purification of the WSLS by a single passage through a Sep Pak C18 Plus cartridge, BP in the hexane eluate was determined by second derivative constant-wavelength synchronous spectrofluorimetry. Method precision (RSD < 6%) and recovery ( approximately 92%) were satisfactory, and the detection and quantification limits (1.05 and 2.28 mug kg(-1) respectively) indicated that the current maximum permissible concentration of BP in smoke flavourings (10 mug kg(-1)) can be monitored by this method.     

Electrochemical and ESR study of 5-nitrofuryl-containing thiosemicarbazones antiprotozoal drugs

Cyclic voltammetry and electron spin resonance (ESR) techniques were used in the investigation of several potential antiprotozoal thiosemicarbazones nitrofurane derivatives. A self-protonation process involving the protonation of the nitro group due to the presence of an acidic proton in the thiosemicarbazone moiety was observed in the first step of a CEE(rev) reduction mechanism of these derivatives. ESR spectra of the free radicals obtained by electrolytic reduction were characterized and analyzed. AM1 methodology was used to obtain the optimized geometries and UB3LYP calculations were performed to obtain the theoretical hyperfine coupling constants. The theoretical study exhibited an unusual assignment of the spin densities showing a free radical centered in the thiosemicarbazone moiety rather than the nitro which are in agreement with the experimental hyperfine pattern.     

Rheological and Electrokinetic Properties of Sodium Montmorillonite Suspensions

Because of their particular electric surface properties and crystal structure, most clay minerals possess a very high ion exchange capacity. Furthermore, the surface charge distribution is anisotropic: while faces of the laminar clay particles have a negative, pH-independent charge, edges may be positive or negative, depending on pH. In this work, we propose to contribute new data on particle-particle interaction and charge distribution, by means of measurements of the low-frequency dielectric dispersion (LFDD) of the clay suspensions. Because of the nonspherical shape of clay particles, there are no theoretical models capable of explaining the experimental relaxation spectra. Hence, we limit ourselves to obtaining indirect information by comparing LFDD spectra in different experimental conditions. The quantities of interest in LFDD are the value of the low-frequency dielectric constant, epsilon'(r)(0), and the characteristic or relaxation frequency, omega(cr). These two parameters were measured varying the weight fraction, straight phi, of clay (0.5, 1, and 1.5% w/v) and the pH of the dispersion medium (5, 7, and 9), while maintaining the ionic strength constant ([NaCl]=10(-4) M). It was found that the characteristic relaxation frequency of the dielectric constant was pH-dependent, with a significant minimum at pH 7 in all cases. The results are interpreted as the superposition of two independent relaxation phenomena, associated with edges and faces. With respect to the weight fraction influence, we have found a linear behavior of epsilon'(r)(0) with straight phi at pH 9, indicating the existence of no significant interaction between particles. However, at pH 7 a slight deviation of linearity is observed, and at pH 5 we observe a clearly nonlinear behavior, indicating a stronger degree of interaction between particles. This is in good agreement with the initial assumption that at acid pH values, the electric surface charge of faces is negative, whereas the edges possess a positive charge, thus favoring attractive face-to-edge interaction. Copyright 2000 Academic Press.     

Electronic and Steric Influence of Axial and Equatorial Ligands in Vitamin B12 Model Complexes Derived from Cobaloxime: Electrochemical and 59Co-NMR Studies

In four series of strictly related organocobalt complexes, derived from cobaloximes by replacement of the O…H…O with O…-BF₂…O and/or (CH₂)₃ groups, the trends of ⁵⁹Co-NMR shielding and electrochemical data are discussed. A largely parallel behaviour of the plots of E_1/2(I) values for the first Co(III)/Co(II) electron transfer vs. the ₅₉Co chemical shifts reflects the similar sensitivity of the two parameters to a change in electron affinity of the central metal ion due to a variation of the organic group R. E_1/2(II) values for the second Co(II)/CO(I) electron transfer are less sensitive to the change of R, but the trend of the plot vs. δ(₅₉Co) is still parallel in the four series. Consistent deviations from a roughly linear dependence of E_1/2(I) on pK_a of the hydrocarbon acid corresponding to R, on Taft constant s?_* and on ⁵⁹Co shielding are noticed for the isopropyl derivatives and attributed to a steric effect. This was confirmed in a series of R? Co(DMG)pyridine complexes in which ⁵⁹Co shielding decreases steadily with increasing steric parameter E_s (Taft) of the alkyl group. There is experimental evidence from X-ray data that δ(⁵⁹Co) decreases with an increase of the Co? C bond length, illustrating steric hindrance in alkyl coordination to be responsible for the decreased shielding of the ⁵⁹Co nucleus. The relative displacements of the graphic displays for the different series reflect the effect of changes in electron affinity of the redox center, due to the equatorial ligand, which, in turn, is caused by variations in the electron-withdrawing power due to the introduction of the BF₂ group and by the change from ?2 to ?1 valence of the (CH₂)₃-capped ligands.     

Catalytic oxidation of thiols to disulfides using iodine and CeCl3·7H2O in graphite

A very simple procedure for the efficient oxidation of thiols to disulfides catalyzed by I₂/CeCl₃·7H₂O in graphite and ethyl acetate as the solvent, in an open system at room temperature is described. The reaction proceeds cleanly under mild conditions and was performed with aromatic, aliphatic, and heterocyclic thiols.     

Hydrogen sulphide doping of GaAs and AlxGa1−xAs grown by molecular beam epitaxy (MBE)

H₂S gas has been used during molecular beam epitaxy (MBE) growth of GaAs and Al _x Ga_1–x As as sulphur vector forn-type doping. Doping efficiencies are less than 10^–3 at usual growth temperatures, and are limited by an incorporation competitive surface process, probably 2Ga+H₂SGa₂S+H₂. In Al_xGa_1–x As forx0.2 the doping efficiency is further reduced by carrier freeze-out at deep levels. Measured thermal activation energies depend on growth conditions and remain relatively low even up to the direct-indirect bandgap crossover for substrate temperatures in the 585–645 C range.     

Spectrophotometric study of bismuth with N-(2-acetamido)iminodiacetic acid (ADA): Determination of bismuth in pharmaceutical formulations

A new method for the Spectrophotometric determination of bismuth using N-(2-acetamido)iminodiacetic acid as complexometric agent is proposed. The complex is formed in a wide pH range, 5.5–7.5, and has a maximum absorption at 265 nm. Beer's law is obeyed in the interval 3.8–17.9 μg of bismuth(III)/ml, with a minimum photometric error of 2.3. The molar absorptivity is 9.1 × 10³ liters/cm mol. The stoichiometry of the reaction takes place in the metal-to-ligand ratio 1:2. The interferences produced by the more common ions are studied. The method has been successfully applied to the determination of bismuth in pharmaceutical formulations.