Fluoropolyethers end‐capped by polar functional groups. IV. A novel approach to the evaluation of reactivities of hydroxy‐terminated ethoxylated fluoropolyethers in the tin(IV)‐catalyzed reactions with isophorone diisocyanate

The effect of catalyst dibutyltin dilaurate (DBTDL) on the kinetics of urethane formation reactions of α,ω‐bis(hydroxy)‐terminated fluoropolyethers Fomblin® Z‐DOL TXs (FPEs) of various molecular weights and poly(oxyethylene) glycol PEG‐400 with isophorone diisocyanate (IPDI) in hexafluoroxylene (HFX) and tetrahydrofuran (THF) at 40 °C and NCO:OH = 2:1 have been studied in a broad range of catalyst (0.10–9.00) ×10^?4 M and total reagents (10.0–60.1 wt %) concentrations. The rate of tin‐catalyzed second‐order reactions (with respect to diol and diisocyanate) was found to be proportional to the square root of catalyst concentration [DBTDL]^0.5 both in low polar (HFX) and polar (THF) solvents. Effect of catalyst saturation was revealed for all the reaction systems at higher DBTDL concentrations as well as the appearance of the limiting catalyst concentrations C_lim below which the rates of reaction were close to zero. Based on these findings new effective rate coefficients have been derived k = k_cat/(C ? C) that are independent of the total reagent concentration in the range of 10.0–60.1 wt % ([OH] = 0.10–0.91 equiv/L). This new approach highlights that the rate of the tin‐catalyzed urethane formation reactions of α,ω‐bis(hydroxy)‐terminated fluoropolyethers Z‐DOL TXs with IPDI in HFX at 40 °C and NCO:OH = 2:1 increases significantly with increasing MW of FPE from 776 up to 3405. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5354–5371, 2004     

Soluble alpha-amino acid salts in acetonitrile: practical technology for the production of some dipeptides

Alpha-amino acids are soluble in acetonitrile when treated with phosphazene bases. As a result, the protection/deprotection events that are usually required for peptide coupling reactions can be minimized. This is illustrated in the synthesis of the important angiotensin-converting enzyme (ACE) inhibitor enalapril. [reaction: see text]     

A highly specific polyclonal antiserum to the environmental contaminant 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)-ethane (p,p′-DDT)

A very selective polyclonal antiserum against 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)-ethane (p,p′-DDT) was obtained by a careful choice of the haptenic structure (2,2-bis(4-chlorophenyl)-ethanol hemisuccinate). This hapten was conjugated to BSA to prepare the immunogen. The effects of different types of solid phases on the equilibrium reaction between the hapten on solid phase and the polyclonal antiserum were evaluated to obtain a fine tuning of the antiserum performances in terms of specificity for p,p′-DDT and sensitivity to low levels of this pesticide. The calibration curves obtained show that it is possible to set up a sensitive assay for p,p′-DDT, employing a p,p′-dichlorodiphenylacetic acid-based solid phase, with a detection limit of 0.12 ng/mL and a working range of about 0.21–40 ng/mL. Selectivity towards several p,p′-DDT-related substances was good (o,p-DDT 17%, p,p′-DDD 1.2% o,p-DDD 6.3%, p,p′-DDE 6.7%). Received: 4 November 1996 / Revised: 9 June 1997 / Accepted: 16 June 1997     

(Bis(1,2,4-triazol-1-yl)methane)silver(I) phosphino complexes: structures and spectroscopic properties of mixed-ligand coordination polymers

Adducts of the ligand bis(1,2,4-triazol-1-yl)methane (tz(2)(CH(2))) of the form AgX:tz(2)(CH(2)):ER(3):MeCN (1:1:1:x) (X = NO(3), R = Ph, E = P, As, or Sb, x = 1 or 2; X = NO(2), ClO(4), O(3)SCF(3), E = P, R = Ph, x = 0, 1 or 2; X = NO(3), ClO(4), E = P, R = cy, x = 1; X = ClO(4), E = As, R = Ph, x = 2) and AgNO(3):tz(2)(CH(2)):P(o-tolyl)(3) (2:2:1) have been synthesized and characterized in the solid state and in solution by analyses, spectral (IR, far-IR, (1)H and (13)C NMR, ESI MS data) data, and conductivity measurements. In the one-dimensional polymers (characterized by X-ray studies) AgNO(3):tz(2)(CH(2)):PPh(3):CH(3)CN (1:1:1:1), AgClO(4):tz(2)(CH(2)):PPh(3):CH(3)CN (1:1:1:2), AgNO(3):tz(2)(CH(2)):AsPh(3): CH(3)CN (1:1:1:2), and AgNO(3):tz(2)(CH(2)):SbPh(3):CH(3)CN (1:1:1:2), the silver atom can be regarded as four-coordinate, the tz(2)(CH(2)) ligands behaving as bridging groups rather than chelates, with no pair of ligands being dominant, quasi-trans, in their interactions. The AgNO(3):tz(2)(CH(2)):P(o-tolyl)(3) (2:2:1) adduct is a two-dimensional polymer containing two independent silver atoms, one four-coordinated unsymmetrically by a pair of triazolyl rings, one P(o-tolyl)(3), and a unidentate nitrate and the second by a quasi-symmetrical O(2)NO chelate and a pair of equivalent triazolyl rings.     

Sensitivity improvement in 19F NMR-based screening experiments: theoretical considerations and experimental applications

NMR-based binding and functional screening performed with FAXS (fluorine chemical shift anisotropy and exchange for screening) and 3-FABS (three fluorine atoms for biochemical screening) represents a potential alternative approach to high-throughput screening for the identification of novel potential drug candidates. The major limitation of this method in its current status is its intrinsic low sensitivity that limits the number of tested compounds. One approach for overcoming this problem is the use of a cryogenically cooled (19)F probe that reduces the thermal noise in the receiver circuitry. Sensitivity improvement in the two screening techniques achieved with the novel cryogenic (19)F probe technology permits an increased throughput, detection of weaker binders and inhibitors (relevant in a fragment-based lead discovery program), detection of slow binders, and reduction in protein and substrate consumption. These aspects are analyzed with theoretical simulations and experimental quantitative performance evaluation. Application of 3-FABS combined with the cryogenic (19)F probe technology to rapid screening at very low enzyme concentrations and the current detection limits reached with this approach are also presented.     

Enthalpies of solvation for N-alkylamides in water and in carbon tetrachloride at 25°C

Molar enthalpies of solution at infinite dilution have been determined at 25°C for several N-alkyl and N,N-dialkylamides in water and in carbon tetrachloride, using a Calvet-type rotating calorimeter, and solution concentrations below 5×10^–2 molal. Relevant enthalpies of transfer between the two solvents also have been derived. Molar enthalpies of solvation have been obtained by adding enthalpies of vaporization to solution values. Results are compared with those of other laboratories on other substituted amides, and their dependence on the number of carbon atoms in the chain is discussed. A possible computation of solvation enthalpies of functional groups is suggested and results for hydration of peptide or similar groups present in the compounds examined are discussed in terms of current models of their hydration and hydrogen bond formation.Presented at the sixth Italian meeting on Calorimetry and Thermal Analysis (AICAT) held in Naples, December 4–7, 1984.     

Iodocyclization/base-induced hydrodeiodination reaction of 5-substituted 4-alkenols. The influence of substituent on the stereoselective pathway

The electrophilic iodocyclization reaction of (Z)- and (E)-5-n-alkylsubstituted 4-alken-1-ols followed by base-induced hydrodeiodination reaction stereoselectively gave, respectively, (Z)- and (E)-alkylidentetrahydrofurans in high yield. Completely different outcomes were observed with (Z)- and (E)-6,6-dimethylhept-4-en-1-ol: their iodocyclization furnished, respectively, threo- and erythro-2-(1-iodo-2,2-dimetylpropyl)tetrahydrofuran with high stereoselectivity. The threo isomer gave clean formation of 6-tert-butyl-3,4-dihydro-2H-pyran by base-induced ring expansion, while erythro isomer underwent a base-induced ring contraction to 1-cyclopropyl-3,3-dimethylbutan-1-one. Moreover, (Z)- and (E)-5-cyclopropylpent-4-en-1-ol underwent a 6-endo-iodocyclization to threo- and erythro-2-cyclopropyl-3-iodotetrahydro-2H-pyran, respectively, that under the same basic treatment, gave two isomeric 6-cyclopropyldihydro-2H-pyrans in a stereoselective fashion.     

Methyl and silyl mesolytic dissociations in the radical cations and radical anions of but-1-ene,allylsilane, hexa-1,3-diene,and penta-2,4-dienylsilane. CAS-MCSCF and coupled cluster theoretical study

Methyl or silyl dissociation in the CH(2)=CHCH(2)-XH(3) (a-XH(3)(*)(+)) and CH(2)=CHCH=CHCH(2)-XH(3) (p-XH(3)(*) (+)) radical cations (X = C, Si) yields a(+) or p(+) and XH(3)(*). Similarly, the radical anions a-CH(3)(*) (-) and p-CH(3)(*) (-) give the pi-delocalized anion and CH(3)(*) preferentially. In contrast, a-SiH(3)(*) (-) and p-SiH(3)(*-) prefer to dissociate into the pi-delocalized radical and silide. All reactions are endoergic: by 43-50 kcal mol(-)(1) in the radical cations, and easier to some extent in the radical anions, that require 29-33 (X = C) and 13-14 kcal mol(-)(1) (X = Si). The fragmentation energy profiles do not present significant barriers for the backward process in the case of the radical cations. All radical anions exhibit an energy maximum along the dissociation pathway, but the barrier is lower than the dissociation limit. Fragmentation is "activated" more in the anions than in the cations with respect to homolysis in the corresponding neutrals (that requires 72-81 kcal mol(-)(1)). Wave function analysis indicates that the C-X bond cleavage in the hydrocarbon radical ions, although formally comparable to a homolytic process, is at variance with this model, due to the spin recoupling of one of the two C-X bond electrons with the originally unpaired electron. This is basically true also for the silyl-substituted radical anions, in which the initial more delocalized charge distribution might suggest some heterolytic character of the bond cleavage.     

Trifluoroacetylsulfenyl trifluoroacetate,CF(3)C(O)-S-O-C(O)CF(3), a novel compound with a symmetrically substituted S-O bond: synthesis,spectroscopic characterization,and quantum chemical calculations

The new compound trifluoroacetylsulfenyl trifluoroacetate, CF(3)C(O)SOC(O)CF(3), which possesses two identical carbonyl substituents attached to the S-O bond, has been synthesized. The IR and UV spectra of the gas phase as well as the (13)C NMR spectrum of the solution in CDCl(3) were recorded and assigned. Quantum chemical calculations were performed with the ab initio methods HF and MP2 and the density functional approach B3LYP. The 6-31G basis set was chosen in all calculations. The molecule possesses a skew structure, and according to all computational methods, the syn-syn structure (C=O bonds of both C(O)CF(3) groups synperiplanar to S-O bond) represents the most stable conformer. In agreement with the quantum chemical calculations, the presence of small amounts (< or =5%) of a second conformer (anti-syn) cannot be excluded on the basis of the IR spectrum. The calculated values for the torsional angle around the S-O bond (delta(C-S-O-C)) of the syn-syn form are smaller than 80 degrees (72-78 degrees). Comparison with theoretical results for the corresponding disulfide CF(3)C(O)SSC(O)CF(3) and peroxide CF(3)C(O)OOC(O)CF(3) indicates that the structural properties of sulfenyl compounds are more similar to those of disulfides than to those of peroxides.     

A unique tautomer of 1‐n‐hexyl‐3‐phenyl‐1H‐pyrazol‐5‐ol

In the title compound, C₁₅H₂₀N₂O, the bond distances and angles are consistent with the presence of the hydroxy tautomer. This tautomer was unambiguously determined by the clear presence of a H atom bonded to oxygen, as well as the total absence of any residual electron density around the N atom in the heterocycle, thus precluding any possibility of desmotropism.