Micro-BLMs on highly ordered porous silicon substrates: rupture process and lateral mobility

In a recent paper, we hypothesized that the continuous increase in membrane conductance observed for nano-BLMs is the result of an independent rupturing of single membranes or membrane patches covering the pores of the porous material. To prove this hypothesis, we prepared micro-BLMs on porous silicon substrates with a pore size of 7 mum. The upper surface of the silicon substrate was coated with a gold layer, followed by the chemisorption of 1,2-dipalmitoyl-sn-glycero-3-phosphothioethanol (DPPTE) and subsequent addition of a droplet of 1,2-diphytanoyl-sn-glycero-3-phosphocholine (DPhPC) dissolved in n-decane. The lipid membranes were fluorescently labeled and investigated by means of fluorescence microscopy and impedance spectroscopy. Impedance spectroscopy revealed the formation of pore-suspending bilayers with high membrane resistance. Increases in membrane capacitance and membrane conductance were observed. This increase in membrane conductance could be unambiguously related to the individual rupturing of membranes suspending the pores of the porous material as visualized by means of fluorescence microscopy. Moreover, by fluorescence recovery after photobleaching experiments, we investigated the lateral mobility of the lipids within the micro-BLMs leading to a mean effective diffusion coefficient of Deff = (14 +/- 1) microm2/s.     

Effect of surface parameters on the performance of IgG-arrayed hydrogel chips: a comprehensive study

In this article, the assay performance of 3D polyurethane (PU) hydrogel surfaces, used either plain or modified with cross linkers and additives in a direct immunoassay for IgG, is correlated with chip surface parameters such as water content and expansion, mechanical stability, hydrophilicity, thickness, and surface topography. Commercial chip surfaces ARChip Epoxy, Nexterion slide H and HydroGel are used as references. A strong correlation between assay sensitivity and physical surface parameters was found only for various hydrogels of the same chemical composition, in which cases assay sensitivity increases with decreasing hydrogel concentration as well as decreasing roughness, water content, and expansion. However, as is the case with all hydrogels tested, more hydrophobic layers with low water content are more highly reproducible from one measurement to another.     

Mechanism of inhibition of human secretory phospholipase A2 by flavonoids: rationale for lead design

The human secretory phospholipase A2 group IIA (PLA2-IIA) is a lipolytic enzyme. Its inhibition leads to a decrease in eicosanoids levels and, thereby, to reduced inflammation. Therefore, PLA2-IIA is of high pharmacological interest in treatment of chronic diseases such as asthma and rheumatoid arthritis. Quercetin and naringenin, amongst other flavonoids, are known for their anti-inflammatory activity by modulation of enzymes of the arachidonic acid cascade. However, the mechanism by which flavonoids inhibit Phospholipase A2 (PLA2) remained unclear so far. Flavonoids are widely produced in plant tissues and, thereby, suitable targets for pharmaceutical extractions and chemical syntheses. Our work focuses on understanding the binding modes of flavonoids to PLA2, their inhibition mechanism and the rationale to modify them to obtain potent and specific inhibitors. Our computational and experimental studies focused on a set of 24 compounds including natural flavonoids and naringenin-based derivatives. Experimental results on PLA2-inhibition showed good inhibitory activity for quercetin, kaempferol, and galangin, but relatively poor for naringenin. Several naringenin derivatives were synthesized and tested for affinity and inhibitory activity improvement. 6-(1,1-dimethylallyl)naringenin revealed comparable PLA2 inhibition to quercetin-like compounds. We characterized the binding mode of these compounds and the determinants for their affinity, selectivity, and inhibitory potency. Based on our results, we suggest C(6) as the most promising position of the flavonoid scaffold to introduce chemical modifications to improve affinity, selectivity, and inhibition of PLA2-IIA by flavonoids.     

An experimental and computational study on intramolecular charge transfer: a tetrathiafulvalene-fused dipyridophenazine molecule

To study the electronic interactions in donor-acceptor (D-A) ensembles, D and A fragments are coupled in a single molecule. Specifically, a tetrathiafulvalene (TTF)-fused dipyrido[3,2-a:2',3'-c]phenazine (dppz) compound having inherent redox centers has been synthesized and structurally characterized. Its electronic absorption, fluorescence emission, photoinduced intramolecular charge transfer, and electrochemical behavior have been investigated. The observed electronic properties are explained on the basis of density functional theory.     

A Series of Collaborations between Various Pharmaceutical Companies and Regulatory Authorities Concerning the Analysis of Biomolecules Using Capillary Electrophoresis: Additional Instruments/Buffer

An international project team (including members from US, Canada and UK) was formed from a number of interested biopharmaceutical companies and regulatory authorities to conduct a cross-organisation collaboration exercise. The results of the first comparison with eight different organisations that used instruments of the same equipment model, the same reagents, and the same methodology has been reported previously [1]. This report represents the addition of other instruments using a different run buffer. The relative migration times were different, as expected, prohibiting a direct comparison between companies. The within-organisation variability was low for both relative migration time (<0.34% RSD% for all companies save one) and the peak area (<5% RSD% for all companies save one) when measuring the purity of a representative IgG sample. The apparent molecular weight of bovine serum albumin was measured with good precision (less than 10% RSD% across all companies) to the theoretical value when all data is utilized (67.5 kDa compared to 66.4 kDa). For a representative IgG sample, the three main components, IgG Light Chain, IgG Non-glycosylated Heavy Chain, and IgG Heavy Chain, could not be separated, specifically the IgG Non-glycosylated Heavy Chain and IgG Heavy Chain. When the IgG Non-glycosylated Heavy Chain and IgG Heavy Chain were combined for all organisations, the fractional peak area for the IgG Light Chain and IgG Non-glycosylated Heavy Chain + IgG Heavy Chain peak also showed excellent agreement, with less than 7.5 and 3.5% RSD%, respectively. The value of this exercise is in demonstrating the reliability of CE for the determination of apparent size of biopharmaceutical proteins. This underpins the appropriate use of such CE data in support of regulatory submissions.     

New copper(II)/cyclic tetrapeptide system that easily oxidizes to copper(III) under atmospheric oxygen

A 13-membered ring cyclic tetrapeptide was synthesized by the solid-phase peptide synthesis method, and its copper(II) coordination properties were analyzed by optical spectroscopy, mass spectrometry, and electrochemistry. All collected data strongly support the presence, at alkaline pH, of a stable peptide/copper(III) complex that is formed in solution by atmospheric dioxygen oxidation. On the basis of previous studies on cyclic peptide/copper systems, we suggest that the copper(III) ion is at the center of the ligand's cavity being coordinated to four deprotonated amide nitrogen atoms. This donor set would greatly lower the redox potential for the CuIII/CuII couple, thus allowing easy oxidation of the coordinated copper(II) by atmospheric oxygen.     

Synthesis, characterization, and reactivity of ruthenium diene/diamine complexes including catalytic hydrogenation of ketones

Thermal reactions between [RuCl2(diene)]n (diene = 2,5-norbornadiene, nbd; 1,5-cyclooctadiene, cod) with an excess of N,N,N',N'-tetramethylethylene diamine (tmeda) afforded derivatives [RuCl2(diene)(tmeda)] (diene = nbd, 1; cod, 2) as a mixture of cis and trans isomers. When thermolysis was performed under H2 mixtures of hydride species [RuCl(H)(diene)(tmeda)] (diene = nbd, 3; cod, 4) and the bis-tmeda adduct trans-[RuCl2(tmeda)2] (5) were obtained in different ratios depending upon the reaction conditions and reaction times. Heating polymeric Ru(II) precursors in toluene in the presence of a 5-fold excess of the bulkier N,N,N',N'-tetraethylethylene diamine (teeda) resulted in a rare diamine dealkylation process with formation of trans-[RuCl2(nbd)(Et2NCH2CH2NHEt)] (6) and trans-[RuCl2(cod)(EtHNCH2CH2NHEt)] (7) in high yields. The presence of N-H functionalities in the coordinated diamine ligands of 6 and 7 was unambiguously established by single-crystal X-ray diffraction studies. The dealkylation process of the teeda ligand seems to proceed intramolecularly as shown by solution NMR studies performed with the soluble Ru(II) precursors trans-[RuCl2(amine)2(diene)] (diene = nbd, amine = morpholine, 9; diene = cod, amine = Et2NH, 10). The above complexes [RuCl2(diene)(diamine)] have been tested as precatalysts in the hydrogenation of ketones both for transfer as well as direct hydrogenation, the latter route being the most effective.     

Enantioselective separation of all-E-astaxanthin and its determination in microbial sources

A method for the enantioselective separation of all-E-astaxanthin (3,3'-dihydroxy-beta,beta-carotene-4,4'-dione), an important colorant in the feed industry, was developed. Different chiral stationary phases (CSPs) such as Pirkle phases (R,R Ulmo and l-leucine), modified polysaccharides and a beta-cyclodextrin have been investigated on their separation performance of astaxanthin enantiomers. Direct resolution was only achieved employing the Chiralcel OD-RH (cellulose-tris-3,5-dimethylphenyl-carbamate) under reversed phase conditions. The chiral separation of the enantiomeric forms of astaxanthin produced in microalgae and yeasts was reported. The yeast Xanthophyllomyces sp. produces astaxanthin predominantly in the R,R configuration, whereas in the green microalgae Scenedesmus sp. astaxanthin is built primarily in the S,S form. The separation method for the identification of astaxanthin enantiomers is of great interest since astaxanthin is used as functional food additive in human nutrition. Moreover the method may be used as a food chain indicator in farmed salmon.     

Comparison of the medium molecular weight venom fractions from five species of common social wasps by MALDI-TOF spectra profiling

The average spectral profiles and the exact mass weight (MW) of biomolecules present in the medium fraction (from 900 to 3000 Da) of the venom of five social wasps (three European and one North American Polistes and the European hornet Vespa crabro) were determined by matrix assisted laser desorption ionization time of flight (MALDI-TOF) MS. Data were obtained analyzing the venom of single specimens (N = 46) and elaborated with the ClinProTools 2.0 (CPT) software to search for differences among the five species examined. Interesting differences in the spectral profiles were found, allowing the discrimination of venoms belonging to the different species, and their possible use as a quality control method in venom immunotherapy (VIT) for allergic patients.