Trimethylsilylverbindungen der Vb-Elemente. VII. Die Kristallstrukturen von Lithium-bis(trimethylsilyl)bismutid · DME und Tetrakis(trimethylsilyl)dibismutan sowie Bemerkungen zur Kristallstruktur des Bis(4-methoxyphenyl)ditellans

Trimethylsilyl Derivatives of Vb Elements. VII. Crystal Structures of Lithium Bis(trimethylsilyl)bismuthide · DME and of Tetrakis(trimethylsilyl)dibismuthane as well as Some Comments on the Crystal Structure of Bis(4-methoxyphenyl)ditellane Colourless lithium bis(trimethylsilyl)bismuthide · DME

1 1,2-Dimethoxyethan (DME); Tetrahydrofuran (THF)

1 and green, metallic lustrous tetrakis(trimethylsilyl)dibismuthane 2 crystallize isotopic to their antimony homologues [1, 2]. As it is shown by crystal structure determinations { 1 : ?90°C; I 4 2d; a = 1017,3(4); c = 3738,0(26) pm; Z = 8; R _w = 0,065; 2 : + 20°C; P2 ₁ /c; a = 680,9(4); b = 1704,8(13); c = 1197,9 (10) pm; β = 119,46(6)°; Z = 2; R _w = 0,084} both compounds form chains which in the case of bismuthide 1 are built up as screws of alternating bismuth and lithium atoms; bonding further to two trimethylsilyl groups or to the chelating DME ligand both atoms gain coordination number 4 {Li? Bi 292(3); Bi? Si 263.3(14) pm; Bi? Li? Bi 132(1); Li? Bi? Li 148(1); φ(Li? Bi? Li? Bi) 83°}. In the case of dibismuthane 2 the centrosymmetric molecules are strung, their Bi-Bi groups forming nearly linear zigzag chains with shortened intermolecular contact distances {Bi-Bi 303.5(3); Bi …? Bi 380.4(3); Bi? Si 268 pm; Bi? Bi …? Bi 169; Bi? Bi? Si 97.4(5) and 92.0(5)°}. Structure and properties of 2 are compared with those of similar compounds; the crystal structure of brown, green metallic lustrous bis(4-methoxyphenyl)ditellane 5 already published by Ludlow and McCarthy[3] is reinvestigated with respect to very short intermolecular Te…?Te contacts.     

Preparation and structural studies on the Bu2Sn(IV) complexes with aromatic mono- and dicarboxylic acids containing hetero {N} donor atom

Nine complexes of ^tBu₂Sn(IV)²⁺ were obtained in the solid state with ligands containing -COOH group(s) and aromatic {N} donor atom. The binding sites of the ligands were identified by FT-IR spectroscopic measurements. It was found that in most cases the -COO⁻ groups are co-ordinated in monodentate manner. Nevertheless, in some of our complexes, the -COO⁻ group forms bridges between two central {Sn} atoms resulting in the formation of an oligomeric structure, a motif that is characteristic only to the nicotinate compound. These pieces of information and the rationalisation of the experimental ¹¹⁹Sn Mössbauer nuclear quadrupole splittings, Δ, - according to the point charge model formalism - support the formation of octahedral (O_h) or trigonal bipyramidal (TBP) molecular structures. The X-ray diffraction analysis of one complex obtained as single crystal revealed the distortion of the TBP geometry towards square pyramidal (SP) one. This was rationalised by PM3 molecular modelling of the ^tBu₂Sn(pdc) complex. In the asymmetric unit, the two chemically similar but symmetry independent molecules form pseudo-dimers, in which the Sn?Sn separation amounts to ca. 6.4 Å. The crystal lattice is stabilised by C-H?O hydrogen bonding between individual molecules.     

Racemic 2‐isopropyl‐3‐(2‐nitrobenzyl)‐1,3‐thiazolidin‐4‐one crystallizes in the space group P212121 with Z′ = 2: two different interpenetrating three‐dimensional frameworks formed by C—H...O hydrogen bonds

rac‐2‐Isopropyl‐3‐(2‐nitrobenzyl)‐1,3‐thiadiazolin‐4‐one, C₁₃H₁₆N₂O₃S, is a rare example of a racemate crystallizing in the space group P2₁2₁2₁, with one molecule each of S and R configurations, whose conformations are almost mirror images, within the asymmetric unit. The molecules of S configuration are linked by two C—H...O hydrogen bonds into a three‐dimensional framework, and the molecules of R configuration are linked by two further C—H...O hydrogen bonds into a different type of three‐dimensional framework; the two frameworks are linked by a fifth C—H...O hydrogen bond.     

Hydrolysis of (CH3)3Sn+ in Various Salt Media

The hydrolysis of trimethyltin(IV) has been studied by potentiometry (H⁺ -glass electrode) and calorimetry in various salt media (NaNO₃, NaCl, KCl, Na₂SO₄, and NaNO₃—NaCl mixtures). The effect of ionic strength on the hydrolysis constants is accounted for by a simple Debye–Hückel type equation and by Pitzer equations. The results allow us to obtain H for hydrolysis and the temperature dependence of the Pitzer parameters. The resulting coefficients can be used to examine the speciation of (CH₃)₃Sn⁺ in multicomponent electrolyte solutions, such as natural waters, over a wide range of temperature and ionic strength.     

Trace element determination in vitamin E using ICP-MS

Vitamin E supplements are either isolated from plants sources or prepared synthetically. Isolation from plants includes eight different tocopherol structures. Vitamin E synthesis includes seven different stereoisomers, which involves the use of several catalysts that may lead to trace element contamination in the vitamin. The use of ICP-MS is an ideal technique for detecting these trace elements. However, the oily nature of the samples requires the development of a sample preparation methodology. This study was done upon the request of synthetic vitamin E manufacturers to test the trace metal purity of their samples. In this work, the comparison of an acid microwave digestion and emulsion preparation is discussed. Cromium, nickel, tin and lead were found in the synthetic vitamin E analyzed and 200, 60, 9 and 45 ppb were the concentrations found respectively for these elements.Digesting the samples gives slightly lower detection limits compared to the emulsion preparation.     

Assay for urinary estriol during the menstrual cycle based on extraction by a graphitized carbon black cartridge followed by high-performance liquid chromatography

Summary A high-performance liquid chromatography (HPLC) assay for estriol in nonpregnancy urine is described. After Enzymic hydrolysis, the estriol is extracted from urine by the sorbent trap technique utilizing graphitized carbon black (Carbopack B). After some washing steps, estriol is desorbed by a suitable solvent system. After solvent removal, the sample is injected into an HPLC column for estriol quantification. Analytical recovery of estriol was 96.1%. The precision of the method was 2.6 and 4.9% respectively at 145 and 10.6ng/ml of urine. The limit of sensitivity was set at 0.8 ng/ml of urine. The mean contents of estriol in the follicular and luteal phases were respectively 11.3 and 38.8 ng/ml of urine.Dedicated to Prof. Dr. A. Liberti on the occasion of his 70th birthday.     

Elektronentransfer und Ionenpaar-Bildung. 40. Mitteilung. Einkristall-Struktur von Bis(Natrium-1,1′-Biphenyl-2-thiolat-Diglyme): Ein Zwischenprodukt der reduktiven Ringöffnung von Dibenzothiophen

Electron Transfer and Ion Pair Formation Single Crystal Structure of Bis(sodium 1,1′-biphenyl-2-thiolate-diglyme): An Intermediate in the Reductive Ring Opening of Dibenzothiophene On Na-metal reduction of dibenzothiophene, the five-membered sulfur ring opens to form a colorless 1,1′-biphenyl-2-thiolate sodium salt, which, according to its single-crystal structure determination, is a dimer containing a four-membered, twice diglyme-solvated ring (diglyme···Na^⊕?SR)₂. Additional measurements provide the following information: cyclic voltammetry in aprotic MeCN solution shows one quasi-reversible electron transfer at E = ?2.58 V. The dibenzothiophene radical anion can be generated in aprotic THF solution at a K mirror and characterized by an 81-line ESR spectrum and its simulation. This blue species is also the first UV/VIS detectable one before the solution changes via green (due to blue + yellow color mixing) to yellow, yielding across an isosbestic point a second and diamagnetic compound. All of the above results suggest a consecutive two-electron reduction followed by an intersystem protonation, M + (e^?) → M^.? (blue) + (e^?) → (M^??, yellow?) + (H^⊕) → MH^? (colorless), to yield the crystallized and structurally characterized reaction intermediate. The diglyme-solvated sodium-salt dimer provides a basis for a quantum-chemical discussion of some facets of the most likely microscopic reduction pathway.     

Effect of adding new phosphazene compounds to poly(butylene terephthalate)/polyamide blends. II: Effect of different polyamides on the properties of extruded samples

Poly(butylene terephthalate) (PBT) and a sample of polyamide have been melt processed in the presence of two new phosphazene compounds, namely 2,2-dichloro-4,4,6,6-bis[spyro(2′,2″-dioxy-1′,1″-biphenyl)]cyclotriphosphazene (2Cl-CP) and 2,2-bis(2-methoxy-4-methyleneoxy-phenoxy)-4,4,6,6-bis[spyro(2′,2″-dioxy-1′,1″-biphenyl)]cyclophosphazene (CP-2EPOX).The blends were prepared by using polyamide 6 (PA6) and polyamide 6,6 (PA66) in 25/75 and 75/25 w/w compositions by using a co-rotating twin-screw extruder.The materials have been completely characterized from a mechanical, rheological, and morphological point of view. The results indicate that the additives used cause an increase of the rupture properties and of the viscosity, especially in the PA6 rich blends containing CP-2EPOX. This result can be not only attributed to a chain extension effect on the PA phase but also to in situ formation of PA/PBT copolymers promoted by the presence of the CP compound as confirmed by NMR and MALDI-TOF analyses. The compatibilization effect fades in blends containing PA66, probably due to a thermal deactivation of the additives at higher temperature required to process this polymer.     

Exchange reactions occurring through active chain ends: Melt mixing of nylon 6 and polycarbonate

The chemical reactions occurring in the melt mixing of nylon6/polycarbonate (Ny6/PC) at 240°C were investigated. The reaction of equimolar Ny6/PC blends can be reconciled within the overall scheme of an exchange reaction occurring with the attack of active amino terminals on the inner carbonate groups. We have performed the synthesis of low molecular weight amino-terminated nylon 6 and the effect of the active amino terminal groups on the exchange kinetics was investigated. The exchange reaction yields sizeable amounts of copolymer, in fact after 75 min of melt mixing the (initially equimolar) blend contains 30 mol of unreacted PC and 70 mol of Ny6/PC copolymer (all the Ny6 was therefore incorporated in the copolymer). Trifluoroacetylation of nylon 6 was used to produce CHCl₃-soluble Ny6/PC copolymers, that could be analyzed by NMR. The NMR analysis yielded, beside the copolymer composition, evidence of the presence of urethane units interconnecting the Ny6 and PC blocks. The amount of urethane units increased with the reaction time, indicating a reduction of the block size as a function of the extent of exchange. Our study established the structure of the products formed, provided the materials balance of the process, and investigated some salient kinetic aspects. A thermal degradation study was also performed by thermogravimetry and direct pyrolysis mass spectrometry, to identify the products formed in the thermal treatment of the blends and to investigate the possible role of the inner amide groups in the intermolecular exchange reactions occurring between Ny6 and PC. Our results prove that these reactions occur above 300°C, and that only the cleavage of carbonate groups, by means of Ny6 amino end groups, is actually occurring at 240°C. © 1994 John Wiley & Sons, Inc.