The Crystallisation Kinetics of Nitrate Cancrinite Na7.6[AlSiO4]6(NO3)1.6 (H2O)2 Under Low Temperature Hydrothermal Conditions

Investigations on the formation of nitrate enclathrated cancrinite were performed under low temperature hydrothermal conditions (353 K, autogeneous pressure). The alkaline transformation of kaolinite in the presence of sodium nitrate was selected as the preferred method of synthesis. All experiments were carried out at high alkalinity, using a 16 molar NaOH solution as well as at low NaOH concentrations (2 molar NaOH). Qualitative phase analysis was performed by X-ray-powder diffraction and IR-spectroscopy. Besides cancrinite formation no further intermediate phases were formed. Quantitative data of the educt conversion into cancrinite was determined by ²⁷Al MAS NMR spectroscopy and integration of the resonance signals of four- and six-coordinated aluminium. Whereas full conversion could be found already after 24 h of reaction under highly alkaline conditions, only an insufficient progress of the reaction resulted in the case of low alkalinity.     

Anion-Responsive Fluorescent Supramolecular Gels

Three novel bis-urea fluorescent low-molecular-weight gelators (LMWGs) based on the tetraethyl diphenylmethane spacer—namely, L1, L2, and L3, bearing indole, dansyl, and quinoline units as fluorogenic fragments, respectively, are able to form gel in different solvents. L2 and L3 gel in apolar solvents such as chlorobenzene and nitrobenzene. Gelator L1 is able to gel in the polar solvent mixture DMSO/H₂O (H₂O 15% v/v). This allowed the study of gel formation in the presence of anions as a third component. An interesting anion-dependent gel formation was observed with fluoride and benzoate inhibiting the gelation process and H₂PO₄⁻, thus causing a delay of 24 h in the gel formation. The interaction of L1 with the anions in solution was clarified by ¹H-NMR titrations and the differences in the cooperativity of the two types of NH H-bond donor groups (one indole NH and two urea NHs) on L1 when binding BzO⁻ or H₂PO₄⁻ were taken into account to explain the inhibition of the gelation in the presence of BzO⁻. DFT calculations corroborate this hypothesis and, more importantly, demonstrate considering a trimeric model of the L1 gel that BzO⁻ favours its disruption into monomers inhibiting the gel formation.     

The Influence of Different Bleaching Protocols on Dentinal Enzymatic Activity: An In Vitro Study

This study aimed to investigate matrix metalloproteinase (MMP) activity in human dentin using in-situ and gelatin zymography, after at-home and in-office bleaching, related to their clinical exposure times. Dentin specimens (n = 5) were treated with 35% hydrogen peroxide (50 min per session/4 sessions), 10% carbamide peroxide (180 min/21 sessions), or no treatment. All were subjected to in-situ zymography. Dentin slices were, subsequently, obtained, covered with fluorescein-conjugated gelatin, and examined with confocal laser-scanning microscopy. The fluorescence intensity was quantified and statistically analyzed using one-way ANOVA and Bonferroni tests (α = 0.05). Furthermore, gelatin zymography was performed on protein extracts obtained from dentin powder (N = 8 teeth), treated with hydrogen peroxide or carbamide peroxide, with different exposure times (10/50 min for hydrogen peroxide; 252/1260 min for carbamide peroxide). The results of the in-situ zymography showed no statistical differences between the bleached specimens and the control group, with a medium level of gelatinolytic activity expressed in the dentin tubules. The results of gelatin zymography showed an increased expression of pro-MMP-9 in carbamide peroxide groups. The expression of pro-MMP-2 decreased in all the experimental groups. The bleaching treatments performed on the enamel of sound teeth do not influence dentinal enzymatic activity. However, when unprotected dentin tissue is bleached, matrix metalloproteinases are more expressed, particularly when carbamide peroxide is used, proportional to the exposure time.     

Transition Metal Substituted Barium Hexaferrite-Modified Electrode: Application as Electrochemical Sensor of Acetaminophen

This study used substituted barium hexaferrites, which were previously prepared and reported by the authors, to detect acetaminophen by the modification of a conventional glassy carbon electrode (GCE), which led to promising results. The synthesis of this electrode-modifying material was conducted using a citrate sol gel process. A test synthesis using glycerin and propylene glycol revealed that glycerin produced a better result, while less positive anodic potential values were associated with the electrooxidation of N-acetyl-p-aminophenol (NAP). Excellent electroactivity was exhibited by the cobalt-substituted barium-hexaferrite-nanomaterial-modified electrode. A good linear relationship between the concentration and the current response of acetaminophen (paracetamol) was obtained with a detection limit of (0.255 ± 0.005) µM for the Ba_1.0Co_1.22Fe_11.41O_18.11 GCE, (0.577 ± 0.007) µM for the Ba_1.14Cu_0.82Fe_11.65O_18.02 GCE, and (0.595 ± 0.008) µM for the bare GCE. The levels of NAP in a real sample of urine were quantitatively analyzed using the proposed method, with recovery ranges from 96.6% to 101.0% and 93.9% to 98.4% for the modified electrode with Cobalt-substituted barium hexaferrites (CoF_M) and Copper-substituted barium hexaferrites (CuF_M), respectively. These results confirm the high electrochemical activity of Ba_1.0Co_1.22Fe_11.41O_18.11 nanoparticles and thus their potential for use in the development of sensing devices for substances of pharmaceutical interest, such as acetaminophen (NAP).     

The effect of Fe doping on superconductivity in ZrRuP

This work reports the structure and superconducting properties of the superconductor ZrRuP doped with Fe; the ZrRu_1−xFe_xP solid solution was investigated by means of X-ray powder diffraction, SQUID magnetometry and Mößbauer spectroscopy. It is shown that the modification of the superconducting properties by doping with Fe is similar to the effect of chemical pressure and that the Fe doped compounds do not show any magnetic ordering.     

Polynomial integrability of the Hamiltonian systems with homogeneous potential of degree − 3

In this paper, we study the polynomial integrability of natural Hamiltonian systems with two degrees of freedom having a homogeneous potential of degree k given either by a polynomial, or by an inverse of a polynomial. For k=−2,−1,…,3,4, their polynomial integrability has been characterized. Here, we have two main results. First, we characterize the polynomial integrability of those Hamiltonian systems with homogeneous potential of degree −3. Second, we extend a relation between the nontrivial eigenvalues of the Hessian of the potential calculated at a Darboux point to a family of Hamiltonian systems with potentials given by an inverse of a homogeneous polynomial. This relation was known for such Hamiltonian systems with homogeneous polynomial potentials. Finally, we present three open problems related with the polynomial integrability of Hamiltonian systems with a rational potential.     

Synthesis of carbon black/polystyrene conductive nanocomposite. Pickering emulsion effect characterized by TEM

In this study, carbon black/polystyrene electrically conductive composites were obtained by suspension polymerization technique. The composite was characterized using transmission electron microscopy, which indicated two outstanding features concerning to the carbon black; first, that the carbon particles were adsorbed onto the surface of the polystyrene particles, similarly as in the Pickering emulsion phenomenon and second, that the primary aggregate structure of the carbon black was significantly affected by the dispersion process. On the other hand, the composite resistivity was in the order of 200 Ωcm, which was attributed to the direct contact of primary carbon black particles (percolation) and not to the tunneling effect. The obtained composite was evaluated as the electrically conductive element in SBR matrix.     

Variable metric bundle methods: From conceptual to implementable forms

To minimize a convex function, we combine Moreau-Yosida regularizations, quasi-Newton matrices and bundling mechanisms. First we develop conceptual forms using “reversal” quasi-Newton formulae and we state their global and local convergence. Then, to produce implementable versions, we incorporate a bundle strategy together with a “curve-search”. No convergence results are given for the implementable versions; however some numerical illustrations show their good behaviour even for large-scale problems.