Trimethylsilylverbindungen der Vb-Elemente. VII. Die Kristallstrukturen von Lithium-bis(trimethylsilyl)bismutid · DME und Tetrakis(trimethylsilyl)dibismutan sowie Bemerkungen zur Kristallstruktur des Bis(4-methoxyphenyl)ditellans

Trimethylsilyl Derivatives of Vb Elements. VII. Crystal Structures of Lithium Bis(trimethylsilyl)bismuthide · DME and of Tetrakis(trimethylsilyl)dibismuthane as well as Some Comments on the Crystal Structure of Bis(4-methoxyphenyl)ditellane Colourless lithium bis(trimethylsilyl)bismuthide · DME

1 1,2-Dimethoxyethan (DME); Tetrahydrofuran (THF)

1 and green, metallic lustrous tetrakis(trimethylsilyl)dibismuthane 2 crystallize isotopic to their antimony homologues [1, 2]. As it is shown by crystal structure determinations { 1 : ?90°C; I 4 2d; a = 1017,3(4); c = 3738,0(26) pm; Z = 8; R _w = 0,065; 2 : + 20°C; P2 ₁ /c; a = 680,9(4); b = 1704,8(13); c = 1197,9 (10) pm; β = 119,46(6)°; Z = 2; R _w = 0,084} both compounds form chains which in the case of bismuthide 1 are built up as screws of alternating bismuth and lithium atoms; bonding further to two trimethylsilyl groups or to the chelating DME ligand both atoms gain coordination number 4 {Li? Bi 292(3); Bi? Si 263.3(14) pm; Bi? Li? Bi 132(1); Li? Bi? Li 148(1); φ(Li? Bi? Li? Bi) 83°}. In the case of dibismuthane 2 the centrosymmetric molecules are strung, their Bi-Bi groups forming nearly linear zigzag chains with shortened intermolecular contact distances {Bi-Bi 303.5(3); Bi …? Bi 380.4(3); Bi? Si 268 pm; Bi? Bi …? Bi 169; Bi? Bi? Si 97.4(5) and 92.0(5)°}. Structure and properties of 2 are compared with those of similar compounds; the crystal structure of brown, green metallic lustrous bis(4-methoxyphenyl)ditellane 5 already published by Ludlow and McCarthy[3] is reinvestigated with respect to very short intermolecular Te…?Te contacts.     

Preparation and structural studies on the Bu2Sn(IV) complexes with aromatic mono- and dicarboxylic acids containing hetero {N} donor atom

Nine complexes of ^tBu₂Sn(IV)²⁺ were obtained in the solid state with ligands containing -COOH group(s) and aromatic {N} donor atom. The binding sites of the ligands were identified by FT-IR spectroscopic measurements. It was found that in most cases the -COO⁻ groups are co-ordinated in monodentate manner. Nevertheless, in some of our complexes, the -COO⁻ group forms bridges between two central {Sn} atoms resulting in the formation of an oligomeric structure, a motif that is characteristic only to the nicotinate compound. These pieces of information and the rationalisation of the experimental ¹¹⁹Sn Mössbauer nuclear quadrupole splittings, Δ, - according to the point charge model formalism - support the formation of octahedral (O_h) or trigonal bipyramidal (TBP) molecular structures. The X-ray diffraction analysis of one complex obtained as single crystal revealed the distortion of the TBP geometry towards square pyramidal (SP) one. This was rationalised by PM3 molecular modelling of the ^tBu₂Sn(pdc) complex. In the asymmetric unit, the two chemically similar but symmetry independent molecules form pseudo-dimers, in which the Sn?Sn separation amounts to ca. 6.4 Å. The crystal lattice is stabilised by C-H?O hydrogen bonding between individual molecules.     

Racemic 2‐isopropyl‐3‐(2‐nitrobenzyl)‐1,3‐thiazolidin‐4‐one crystallizes in the space group P212121 with Z′ = 2: two different interpenetrating three‐dimensional frameworks formed by C—H...O hydrogen bonds

rac‐2‐Isopropyl‐3‐(2‐nitrobenzyl)‐1,3‐thiadiazolin‐4‐one, C₁₃H₁₆N₂O₃S, is a rare example of a racemate crystallizing in the space group P2₁2₁2₁, with one molecule each of S and R configurations, whose conformations are almost mirror images, within the asymmetric unit. The molecules of S configuration are linked by two C—H...O hydrogen bonds into a three‐dimensional framework, and the molecules of R configuration are linked by two further C—H...O hydrogen bonds into a different type of three‐dimensional framework; the two frameworks are linked by a fifth C—H...O hydrogen bond.     

A synthetic hydroxy acid that shows tubular-shaped structure in solid-state and ionophoric activity in phospholipid bilayers

[formula: see text] In this contribution, we describe the ability of compound (+/-)-1b and six molecules of water to form in solid-state hexameric aggregates, which self-assemble to give hollow tubular structures. Single-crystal X-ray analysis shows that these tubes are open-ended, with irregular shape and internal van der Waals pore diameter between 6 and 9 A. In addition, transmembrane sodium transport activity was also assessed for (+/-)-1b using dynamic Na(+)-NMR technique.     

Trace element determination in vitamin E using ICP-MS

Vitamin E supplements are either isolated from plants sources or prepared synthetically. Isolation from plants includes eight different tocopherol structures. Vitamin E synthesis includes seven different stereoisomers, which involves the use of several catalysts that may lead to trace element contamination in the vitamin. The use of ICP-MS is an ideal technique for detecting these trace elements. However, the oily nature of the samples requires the development of a sample preparation methodology. This study was done upon the request of synthetic vitamin E manufacturers to test the trace metal purity of their samples. In this work, the comparison of an acid microwave digestion and emulsion preparation is discussed. Cromium, nickel, tin and lead were found in the synthetic vitamin E analyzed and 200, 60, 9 and 45 ppb were the concentrations found respectively for these elements.Digesting the samples gives slightly lower detection limits compared to the emulsion preparation.     

Elektronentransfer und Ionenpaar-Bildung. 40. Mitteilung. Einkristall-Struktur von Bis(Natrium-1,1′-Biphenyl-2-thiolat-Diglyme): Ein Zwischenprodukt der reduktiven Ringöffnung von Dibenzothiophen

Electron Transfer and Ion Pair Formation Single Crystal Structure of Bis(sodium 1,1′-biphenyl-2-thiolate-diglyme): An Intermediate in the Reductive Ring Opening of Dibenzothiophene On Na-metal reduction of dibenzothiophene, the five-membered sulfur ring opens to form a colorless 1,1′-biphenyl-2-thiolate sodium salt, which, according to its single-crystal structure determination, is a dimer containing a four-membered, twice diglyme-solvated ring (diglyme···Na^⊕?SR)₂. Additional measurements provide the following information: cyclic voltammetry in aprotic MeCN solution shows one quasi-reversible electron transfer at E = ?2.58 V. The dibenzothiophene radical anion can be generated in aprotic THF solution at a K mirror and characterized by an 81-line ESR spectrum and its simulation. This blue species is also the first UV/VIS detectable one before the solution changes via green (due to blue + yellow color mixing) to yellow, yielding across an isosbestic point a second and diamagnetic compound. All of the above results suggest a consecutive two-electron reduction followed by an intersystem protonation, M + (e^?) → M^.? (blue) + (e^?) → (M^??, yellow?) + (H^⊕) → MH^? (colorless), to yield the crystallized and structurally characterized reaction intermediate. The diglyme-solvated sodium-salt dimer provides a basis for a quantum-chemical discussion of some facets of the most likely microscopic reduction pathway.     

Host-guest antenna materials

The focus of this review is on host-guest composites with photonic antenna properties. The material generally consists of cylindrical zeolite L crystals the channels of which are filled with dye molecules. The synthesis is based on the fact that molecules can diffuse into individual channels. This means that, under the appropriate conditions, they can also leave the zeolite by the same way. In some cases, however, it is desirable to block their way out by adding a closure molecule. Functionalization of the closure molecules allows tuning of, for example, wettability, refractive index, and chemical reactivity. The supramolecular organization of the dyes inside the channels is a first stage of organization. It allows light harvesting within a certain volume of a dye-loaded nanocrystalline zeolite and radiationless transport to both ends of the cylinder or from the ends to the center. The second stage of organization is the coupling to an external acceptor or donor stopcock fluorophore at the ends of the channels, which can trap or inject electronic excitation energy. The third stage of organization is the coupling to an external device through a stopcock molecule. The wide-ranging tunability of these highly organized materials offers fascinating new possibilities for exploring excitation-energy-transfer phenomena, and challenges for developing new photonic devices.     

Bulky Arylgallium and Indium Derivatives with Co(CO)4 and Mn(CO)5 Substituents

Further investigation of the reaction of Ar*GaCl₂ (Ar* = 2,4,6-t-Bu₃C₆H₂) with Na[Mn(CO)₅] resulted in the new compound, [Ga(Ar*){Mn(CO)₅}₂] 2 . The new indium compounds, [In(Ar*){Co(CO)₄}₂] 3 and [In(Ar*){Mn(CO)₅}₂] 4 , have been prepared by the treatment of Ar*InBr₂ with Na[Co(CO)₄] and Na[Mn(CO)₅], respectively. The structure of 3 was established by single-crystal X-ray diffraction: space group P1 (No. 2), Z = 2, a = 8.625(1) Å, b = 10.557(2) Å, c = 17.55(2) Å, α = 88.43(1)°, β = 83.45(1)°, γ = 71.14(1)°. The X-ray crystal structure of [Ga{Mn(CO)₅}₃] is also reported: space group Pbca (No. 61), Z = 8, a = 12.83(3) Å, b = 11.753(2) Å, c = 29.662(6) Å, α = β = γ = 90°.