Determination of trace levels of calcium in steels by carbon-furnace atomic-absorption and atomic-emission spectrometry

Methods are described for the determination of trace levels of calcium in steels by atomic-absorption and atomic-emission spectrometry with a carbon furnace for atomization and excitation. In both cases, a commercial electrothermal atomic-absorption instrument was used. Samples were analysed after dissolution in a mixture of nitric, hydrochloric, and hydrofluoric acids.     

Study on resolution capacity and secondary mechanisms of three different TSK gels for organic SEC

A comparative study on the elution behavior in size-exclusion chromatography (SEC) of three polymeric TSK gel packings, named H, H(HR), and H(XL) types, is performed. The deviations of the universal calibration (u.c.) curves of seven solvent-polymer systems show evidence that the existence of secondary effects accompanying the main SEC mechanism. These secondary mechanisms are a consequence of the binary enthalpic interactions between the different components of the chromatographic system, such as polymer-solvent, polymer-gel and solvent-gel. However, in the present case, the observed deviations from a unique u.c. curve can mainly be attributed to adsorption of polymeric solutes (analytes) onto the residual moieties of the gel surfaces, (i.e., to polymer-gel interactions). These enthalpic interactions can be quantitated by the values of the distribution coefficient, Kp, which follows the order: Kp (gel H(XL)) > Kp (gel H(HR)) > Kp (gel H). Moreover, the specific resolution of the three types of packings is also estimated, and its comparison yields that Rsp (gel H(HR)) > Rsp (gel H(XL)) > Rsp (gel H), in good agreement with their increasing particle size and decreasing crosslinking degrees. Finally, the errors and inaccuracies committed on the estimation of the sample average molar masses from their respective calibration curves serves the assessment that the packing with lesser secondary mechanisms is the H-type.     

Preconcentration of heavy metals ions from aqueous solutions by means of cellulose phosphate: an application in water analysis

Cellulose phosphate (CELLPHOS) was studied as a collector for analytical preconcentration of traces of Cd(II), Cr(III), Cu(II) and Ni(II) from aqueous sample solution. It has been proved that using chromatographic columns packed with CELLPHOS for preconcentration and 1.0 mol 1(-1) HCl for elution the adsorbed analytes are quantitatively enriched. An enrichment factor of 20 (100 ml sample, 5 ml concentrate) was achieved by this separation procedure, which was applied to a series of water analyses (river, sea, bog water).     

A convenient synthesis of novel pyrido(1′,2′:1,2)imidazo[5,4‐d]‐1,2,3‐triazinones from imidazo[1,2‐a]pyridines

The imidazo[1,2‐a]pyridine system was investigated as a synthon for the building of very attractive fused triazines, a planar, angular tri‐heterocycle with potential biological activity. Thus ethyl 3‐nitroimidazo[1,2‐a]pyridine‐2‐carboxylate was treated with ammonia or with an excess of primary amines to generate the corresponding substituted nitro carboxamidoimidazopyridines. The nitro substituent in the latter products, was reduced to yield 3‐amino‐2‐carboxamidoimidazo[1,2‐a]pyridine derivatives, which in turn were treated with nitrous acid to furnish 1‐oxo‐2‐substituted pyrido(1′,2′:1,2)imidazo[5,4‐d]‐1,2,3‐triazines.     

The chemistry of the azanonaborane cluster RNH2---B8H11NHR

The preparation and properties of the R¹R²NH---B₈H₁₁NHR cluster are described. The cluster is stable to aqueous solutions and can be made water-soluble by the introduction of a few hydrophilic groups. This makes the cluster a good candidate as the boron moiety in compounds for boron neutron capture therapy. The chemistry of the cluster preparation, the stability of the cluster, and conditions for reactions of the organic moieties are reviewed. Pyridine derivatives of the cluster show electronic interaction between the cluster and the pyridine.     

Viscometric and sorption equilibrium studies on n-alkane-butanone-poly-(dimethylsiloxane) systems

Intrinsic viscosities, [η], second virial coefficients, A₂, and preferential solvation coefficients, λ, for the ternary systems n-alkane (l)-butanone (2)-poly(dimethylsiloxane) (PDMS) (3), with n-alkane = n-hexane, n-heptane, n-nonane and n-undecane, have been determined at 20°. The K and a constants of the Mark-Houwink equation have been evaluated over the whole composition range of the binary solvent mixtures. Polymer (mixed solvent) interaction parameters and unperturbed dimensions have been evaluated both from A₂ and [η] data, the feasibility of A₂ evaluation from [η] experimental data or vice versa being discussed. Experimental and calculated (through Dondos and Patterson theory) excess free energies, G^E, follow similar trends with composition; large numerical discrepancies, however, arise between both sets of G^E. Maxima in [η], in a and in A₂ are accompanied by inversion points in λ. The solvent mixture composition range in which PDMS is preferentially solvated by n-alkane, as well as the extent of solvation, decrease with increasing number of carbon atoms in the n-alkane.     

Photophysics of aromatic molecules with low-lying pi sigma* states: excitation-energy dependence of fluorescence in jet-cooled aromatic nitriles

Excitation-energy dependence of fluorescence intensity and fluorescence lifetime has been measured for 4-dimethylaminobenzonitrile (DMABN), 4-aminobenzonitrile (ABN), 4-diisopropylaminobenzonitrile (DIABN), and 1-naphthonitrile (NN) in a supersonic free jet. In all cases, the fluorescence yield decreases rather dramatically, whereas the fluorescence lifetime decreases only moderately for S1 (pi pi*, L(b)) excess vibrational energy exceeding about 1000 cm(-1). This is confirmed by comparison of the normalized fluorescence excitation spectrum with the absorption spectrum of the compound in the vapor phase. The result indicates that the strong decrease in the relative fluorescence yield at higher energies is due mostly to a decrease in the radiative decay rate of the emitting state. Comparison of the experimental results with the TDDFT potential energy curves for excited states strongly suggests that the decrease in the radiative decay rate of the aminobenzonitriles at higher energies is due to the crossing of the pi pi* singlet state by the lower-lying pi sigma*(C[triple bond]N) singlet state of very small radiative decay rate. The threshold energy for the fluorescence "break-off" is in good agreement with the computed energy barrier for the pi pi*/pi sigma* crossing. For NN, on the other hand, the observed decrease is in fluorescence yield at higher excitation energies can best be attributed to the crossing of the pi pi* singlet state by the pi sigma* triplet state.     

Reaction of tetrahydrobenz[a]acridinones with hydroxylamine hydrochloride. VII

Oximation of ortho-substituted phenylbenz[a]acridinones using hydroxylamine hydrochloride, sodium hydroxide and ethanol as the solvent gave always the benzoquinacridine N-oxide 2 . Oximation of para-substituted phenylbenz[a]acridinones, however, gave only the corresponding oximes. The structure of all products was corroborated by ir, ¹H and ¹³C-nmr and mass spectral data. Theoretical calculations support the experimental findings.     

Thermal behavior of polyacrylonitrile polymers synthesized under different conditions and comonomer compositions

Polyacrylonitrile (PAN) polymers are used as precursors for carbon fiber production. This process requires an oxidative stabilization step, which can be studied by differential scanning calorimetry (DSC). In this sense, thermal behavior of PAN based terpolymers by different polymerization processes, compositions and itaconic acid concentrations in the reaction media were investigated. The obtained results showed that the addition of itaconic acid and methyl acrylate as comonomers resulted a lower heat flow during the process comparing to the PAN homopolymer. It suggested that these comonomers aid the oxidative stabilization stage for all studied process. The redox system polymerization at 40°C resulted in a lower heat flow. Itaconic acid decreases slightly initial and peak temperatures of the terpolymer and heat flow until concentration of 3y. The cyclization temperature decreases when MAis incorporated into the terpolymer compared to the MMA terpolymer and increases when MAA is the acidic monomer. Among terpolymers the AN/MA/AA polymer showed the best thermal behavior for carbon fiber producing.