Development of a headspace-gas chromatography (HS-GC-PID-FID) method for the determination of VOCs in environmental aqueous matrices: Optimization, verification and elimination of matrix effect and VOC distribution on the Fortaleza Coast, Brazil

An analytical protocol combining a headspace technique with gas chromatography and detection by photoionization detector and flame ionization detector (HS-GC-PID-FID) was developed. This procedure was used to measure volatile organic compounds (VOCs) in environmental aqueous matrices and was applied in determination of VOCs on the coast of Fortaleza, Brazil. At optimum operating conditions, analytical figures of merit such as linearity (R ranged from 0.9983 to 0.9993), repeatability (5.62 to 9.63% and 0.02 to 0.19% for the quantitative and qualitative analyses, respectively), detection limits (0.22 to 7.48 μg L⁻¹) and sensibility were estimated. This protocol favors a fast sampling/sample preparation (in situ), minimizes the use of laboratory material, eliminates the matrix effect from environmental samples, and can be applied to river, estuarine and oceanic waters. The advantage of detectors in series is that a low sensitivity in detection in one is compensated by the other. Toluene was the most abundant VOC in the studied area, with an average concentration of 1.63 μg L⁻¹. It was followed by o-xylene (1.15 μg L⁻¹), trichloroethene (1.08 μg L⁻¹), benzene (0.86 μg L⁻¹), ethylbenzene (0.74 μg L⁻¹), carbon tetrachloride (0.55 μg L⁻¹), m/p-xylene (0.48 μg L⁻¹) and tetrachloroethene (0.46 μg L⁻¹), compounds which are very commonly detected in urban runoff from most cities. The results of the VOC distribution showed that port activity was not the main source of VOCs along the Fortaleza Coast, but that the contribution from urban runoff seemed more significant.     

AT‐Specific DNA Binding of Binuclear Ruthenium Complexes at the Border of Threading Intercalation

The binuclear ruthenium complex [μ‐bidppz(phen)₄Ru₂]⁴⁺ has been extensively studied since the discovery of its unusual threading intercalation interaction with DNA, a binding mode with extremely slow binding and dissociation kinetics. The complex has been shown to be selective towards long stretches of alternating AT base pairs, which makes it interesting, for example, as a model compound for anti‐malaria drugs due to the high AT content of the genome of the malaria parasite P. falciparum. We have investigated the effect of bridging ligand structure on threading intercalation ability and found that length and rigidity as well as the size of the intercalated ring system are all factors that affect the rate and selectivity of the threading intercalation. In particular, we discovered a new DNA‐threading compound, [μ‐dppzip(phen)₄Ru₂]⁴⁺, which appears to be just at the border of being capable of threading intercalation and displays even greater selectivity for AT‐DNA than the parent compound, [μ‐bidppz(phen)₄Ru₂]⁴⁺.     

Determining the efficacy of a nanotechnology media product in enhancing children’s engagement with nanotechnology

Public engagement in nanotechnology media products can lead to a greater interest in understanding of nanotechnology. A study was undertaken to determine middle school student engagement in Nanooze, a magazine featuring nanotechnology research that has been developed for a young adult audience. Teachers at 116 Detroit middle schools distributed two issues of the magazine to their students, and surveys were collected from 870 students after reading the magazines. Results suggest that the majority of students liked reading the magazine and learned something about nanotechnology. Engagement in nanotechnology led to understanding of nanotechnology. The Nanooze magazine was an effective medium for engaging middle school students in learning about nanotechnology.     

{Δ‐1,4,7,10‐Tetrakis[(S)‐2‐hydroxy­propyl‐κO]‐1,4,7,10‐tetra­aza­cyclo­do­dec­ane‐κ4N}cad­mium(II) 4‐nitrophenolate per­chlor­ate hydrate

Crystallization of [Cd(S‐thpc12)](ClO₄)₂·H₂O {S‐thpc12 is 1,4,7,10‐tetra­kis[(S)‐2‐hy­drox­y­propyl]‐1,4,7,10‐tetra­aza­cy­clo‐do­dec­ane} in the presence of sodium p‐nitrophenolate forms the title complex, [Cd(C₂₀H₄₄N₄O₄)](C₆H₄NO₃)(ClO₄)·H₂O, in which p‐nitrophenolate and water separately hydrogen bond to a different pair of cis‐related pendant hydroxyl groups which, together with the four N atoms, are themselves bound to Cd^II in an approximately square antiprismatic arrangement. The diastereoselectivity of the complex‐forming process is apparent from the fact that both different disymmetric cations in the asymmetric unit have the same Δ helicity.     

High‐molecular‐weight symmetrical multiblock copolymers: Synthesis by RAFT polymerization and characterization

High‐molecular‐weight (MW) symmetrical multiblock copolymers, based on the hydrophobic monomers styrene (Sty) and methyl methacrylate (MMA), and the more polar monomer, 2‐vinyl pyridine (2VPy), were prepared using stepwise reversible addition‐fragmentation chain transfer polymerization. All copolymers shared a common poly(ethylene glycol) (PEG) midblock, introduced as a bifunctional macromolecular chain transfer agent. In total, five ABA triblock copolymers, five ABCBA pentablock terpolymers, and two ABCDCBA heptablock quaterpolymers (comprising four different monomer types) were synthesized. The MWs of the multiblock polymers were determined using gel permeation chromatography (GPC) and proton nuclear magnetic resonance (¹H NMR) spectroscopy, with the latter values being closer to the theoretically expected, whereas GPC MW distributions were relatively narrow, broadening with the number of blocks. The compositions of the synthesized polymers, as determined by ¹H NMR spectroscopy, were also close to the expected values. Finally, films cast from chloroform solutions of the pentablock terpolymers P2VPy‐b‐PSty‐b‐PEG‐b‐PSty‐b‐P2VPy, PSty‐b‐PMMA‐b‐PEG‐b‐PMMA‐b‐PSty, and P2VPy‐b‐PMMA‐b‐PEG‐b‐PMMA‐b‐P2VPy examined using transmission electron microscopy exhibited PSty and PMMA cylinders (first two) and lamellae (third terpolymer). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4957–4965     

Effect of thermal history on the deformation and failure of polyimides

Thermal‐processing structure‐property relationships for polyetherimide (PEI), poly(4,4′‐oxydiphenylene pyromellitimide) (POPPI), and phenylethynyl‐terminated imide (PETI‐5) composite matrices are reported from a fundamental perspective. For thermoplastic PEI, deformation and failure depend primarily on free volume as evidenced by moisture‐absorption, mechanical‐property, and mass‐density changes as a function of annealing. The deformation of POPPI can be divided into the following three regimes as a function of annealing temperature: (1) physical aging‐induced glassy state free‐volume decreases, (2) thermally activated microvoid collapse, and (3) chemical degradation. In the case of PETI‐5, macroscopic defects, free volume, and polymer morphology control deformation. The effects of residual crystallinity on deformation are reported, and it is shown that mechanical toughness can be significantly decreased upon annealing below the glass‐transition temperature. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2947–2959, 2001     

Evidence for the decay D0-->K(-)pi(+)pi(-)e(+)nu(e)

Using a 281 pb{-1} data sample collected at the psi(3770) with the CLEO-c detector, we present the first absolute branching fraction measurement of the decay D0-->K(-)pi(+)pi(-)e(+)nu(e) at a statistical significance of about 4.0 standard deviations. We find 10 candidates consistent with the decay D0-->K(-)pi(+)pi(-)e(+)nu(e). The probability that a background fluctuation accounts for this signal is less than 4.1 x 10{-5}. We find B(D0-->K(-)pi(+)pi(-)e(+)nu(e)) = [2.8{-1.1}{+1.4}(stat)+/-0.3(syst)]x10{-4}. By restricting the invariant mass of the hadronic system to be consistent with K1(1270), we obtain the product of branching fractions B(D{0}-->K{1}{-}(1270)e{+}nu{e})xB(K1-(1270)-->K{-}pi{+}pi{-})=[2.5{-1.0}{+1.3}(stat)+/-0.2(syst)]x10{-4}. Using B(K1-(1270)-->K{-}pi{+}pi{-})=(33+/-3)%, we obtain B(D{0}-->K{1}{-}(1270)e{+}nu{e})=[7.6{-3.0}{+4.1}(stat)+/-0.6(syst)+/-0.7]x10{-4}. The last error accounts for the uncertainties in the measured K1-(1270)-->K{-}pi{+}pi{-} branching fractions.     

Experimental and theoretical determination of frequencies of elastic toroids

Experiments are described which determine natural frequencies of five toroidal models whose major diameters are of 10 in. and whose minor diameters vary from 0.25 to 2 in. The experimentally determined frequencies are compared with the theoretical frequencies derived using the elementary theories for the in-plane and out-of-plane vibrations of circular rings of R. Hoppe and J. H. Michell, as well as the method of internal constraints. The comparative results for the frequencies are presented in tabular form.     

A Facile Method to Prepare Double‐Layer Isoporous Hollow Fiber Membrane by In Situ Hydrogen Bond Formation in the Spinning Line

A double‐layer hollow fiber is fabricated where an isoporous surface of polystyrene‐block‐poly(4‐vinylpyridine) is fixed on a support layer by co‐extrusion. Due to the sulfonation of the support layer material, delamination of the two layers is suppressed without increasing the number of subsequent processing steps for isoporous composite membrane formation. Electron microscope‐energy‐dispersive X‐ray spectroscopy images unveil the existence of a high sulfur concentration in the interfacial region by which in‐process H‐bond formation between the layers is evidenced. For the very first time, our study reports a facile method to fabricate a sturdy isoporous double‐layer hollow fiber.