Mechanistic Elucidations of Highly Dispersed Metalloporphyrin Metal-Organic Framework Catalysts for CO2 Electroreduction

Immobilization of porphyrin complexes into crystalline metal–organic frameworks (MOFs) enables high exposure of porphyrin active sites for CO₂ electroreduction. Herein, well-dispersed iron-porphyrin-based MOF (PCN-222(Fe)) on carbon-based electrodes revealed optimal turnover frequencies for CO₂ electroreduction to CO at 1 wt.% catalyst loading, beyond which the intrinsic catalyst activity declined due to CO₂ mass transport limitations. In situ Raman suggested that PCN-222(Fe) maintained its structure under electrochemical bias, permitting mechanistic investigations. These revealed a stepwise electron transfer-proton transfer mechanism for CO₂ electroreduction on PCN-222(Fe) electrodes, which followed a shift from a rate-limiting electron transfer to CO₂ mass transfer as the potential increased from −0.6 V to −1.0 V vs. RHE. Our results demonstrate how intrinsic catalytic investigations and in situ spectroscopy are needed to elucidate CO₂ electroreduction mechanisms on PCN-222(Fe) MOFs.     

Structure-activity relationships in cholapod anion carriers: enhanced transmembrane chloride transport through substituent tuning

Chloride transport by a series of steroid-based "cholapod" receptors/carriers was studied in vesicles. The principal method involved preincorporation of the cholapods in the vesicle membranes, and the use of lucigenin fluorescence quenching to detect inward-transported Cl-. The results showed a partial correlation between anion affinity and transport activity, in that changes at the steroidal 7 and 12 positions affected both properties in concert. However, changes at the steroidal 3-position yielded irregular effects. Among the new steroids investigated the bis-p-nitrophenylthiourea 3 showed unprecedented activity, giving measurable transport through membranes with a transporter/lipid ratio of 1:250 000 (an average of <2 transporter molecules per vesicle). Increasing transporter lipophilicity had no effect, and positively charged steroids had low activity. The p-nitrophenyl monourea 25 showed modest but significant activity. Measurements using a second method, requiring the addition of transporters to preformed vesicle suspensions, implied that transporter delivery was problematic in some cases. A series of measurements employing membranes of different thicknesses provided further evidence that the cholapods act as mobile anion carriers.     

Poly(diiododiacetylene): preparation, isolation, and full characterization of a very simple poly(diacetylene)

Poly(diiodiacetylene), or PIDA, is a conjugated polymer containing the poly(diacetylene) (PDA) backbone but with only iodine atom substituents. The monomer diiodobutadiyne (1) can be aligned in the solid state with bis(nitrile) oxalamide hosts by hydrogen bonds between oxalamide groups and weak Lewis acid-base interactions (halogen bonds) between nitriles and iodoalkynes. The resulting cocrystals start out pale blue but turn shiny and copper-colored as the polymerization progresses. The development of a crystallization methodology that greatly improves the yield of PIDA to about 50% now allows the full characterization of the polymer by X-ray diffraction, solid-state (13)C MAS NMR, Raman, and electron absorption spectroscopy. Comparison of a series of hosts reveals an odd-even effect in the topochemical polymerization, based on the alkyl chain length of the host. In the cocrystals formed with bis(pentanenitrile) oxalamide (4) and bis(heptanenitrile) oxalamide (6), the host/guest ratio is 1:2 and the monomer polymerizes spontaneously at room temperature, while in the case of bis(butanenitrile) oxalamide (3) and bis(hexanenitrile) oxalamide (5), where the host and guest form cocrystals in a 1:1 ratio, the polymerization is disfavored and does not go to completion. The topochemical polymerization can also be observed in water suspensions of micrometer-sized 6.1 cocrystals; the size distribution of these microcrystals, and the resulting polymer chains, can be controlled by sonication. Completely polymerized PIDA cocrystals show a highly resolved vibronic progression in their UV/vis absorption spectra. Extensive rinsing of the crystals in organic solvents such as methanol, THF, and chloroform separates the polymer from the soluble host. Once isolated, PIDA forms blue suspensions in a variety of solvents. The UV/vis absorption spectra of these suspensions match the cocrystal spectrum, without the vibronic resolution. However, they also include a new longer-wavelength absorption peak, associated with aggregation of the polymer chains.     

Using atom interferometry to detect dark energy

We review the tantalising prospect that the first evidence for the dark energy driving the observed acceleration of the universe on giga-parsec scales may be found through metre scale laboratory-based atom interferometry experiments. To do that, we first introduce the idea that scalar fields could be responsible for dark energy and show that in order to be compatible with fifth force constraints, these fields must have a screening mechanism which hides their effects from us within the solar system. Particular emphasis is placed on one such screening mechanism known as the chameleon effect where the field’s mass becomes dependent on the environment. The way the field behaves in the presence of a spherical source is determined and we then go on to show how in the presence of the kind of high vacuum associated with atom interferometry experiments, and when the test particle is an atom, it is possible to use the associated interference pattern to place constraints on the acceleration due to the fifth force of the chameleon field – this has already been used to rule out large regions of the chameleon parameter space and maybe one day will be able to detect the force due to the dark energy field in the laboratory.     

Evaluation of the activity of the sponge metabolites avarol and avarone and their synthetic derivatives against fouling micro- and macroorganisms

The sesquiterpene hydroquinone avarol (1) was isolated from the marine sponge Dysidea avara, whereas the corresponding quinone, avarone (2), was obtained by oxidation of avarol, and the significantly more lipophilic compounds [3'-(p-chloro-phenyl)avarone (3), 3',4'-ethylenedithioavarone (4), 4'-isopropylthioavarone (5), 4'-tert-butylthioavarone (6), 4'-propylthioavarone (7), 4'-octylthioavarone (8)] were obtained by nucleophilic addition of thiols or p-chloroaniline to avarone. All these compounds were tested, at concentrations ranging from 0.5 to 50 microg/mL, for their effect on the settlement of the cyprid stage of Balanus amphitrite, for toxicity to both nauplii and cyprids and for their growth inhibitory activity on marine bacteria (Cobetia marina, Marinobacterium stanieri, Vibrio fischeri and Pseudoalteromonas haloplanktis) and marine fungi (Halosphaeriopsis mediosetigera, Asteromyces cruciatus, Lulworthia uniseptata and Monodictys pelagica).     

The genomisotopic approach: a systematic method to isolate products of orphan biosynthetic gene clusters

With the increasing number of genomes sequenced and available in the public domain, a large number of orphan gene clusters, for which the encoded natural product is unknown, have been identified. These orphan gene clusters represent a tremendous source of novel and possibly bioactive compounds. Here, we describe a "genomisotopic approach," which employs a combination of genomic sequence analysis and isotope-guided fractionation to identify unknown compounds synthesized from orphan gene clusters containing nonribosomal peptide synthetases. Analysis of the Pseudomonas fluorescens Pf-5 genome led to the identification of an orphan gene cluster predicted to code for the biosynthesis of a lipopeptide natural product. Application of the genomisotopic approach to isolate the product of this gene cluster resulted in the discovery of orfamide A, founder of a group of bioactive cyclic lipopeptides.     

Development and application of immunoaffinity column chromatography for atrazine in complex sample media

A rabbit antibody immunoaffinity (IA) column procedure was evaluated as a cleanup method for the determination of atrazine in soil, sediment, and food. Four IA columns were prepared by immobilizing a polyclonal rabbit anti-atrazine antibody solution to HiTrap Sepharose columns. Atrazine was bound to the IA columns when the loading solvents were either 100% water, 2% acetonitrile in water, or 10% methanol in phosphate buffered saline (PBS). Quantitative removal of atrazine from the IA columns was achieved with elution solvents of either 70% ethanol in water, 70% methanol in water, or 100% methanol. One control column was prepared using nonspecific rabbit IgG antibody. This control column did not retain any applied atrazine indicating atrazine did not bind indiscriminately to protein or the Sepharose support. The four IA columns showed reproducible coupling efficiency for the immobilization of the atrazine antibody and consistent binding and releasing of atrazine. The coupling efficiency (4.25 mg of antibody in 1 mL of resin bed) for the four IA columns ranged from 93 to 97% with an average of 96 ± 2% (2.1%). Recoveries of the 500, 50, and 5 ng mL⁻¹ atrazine standard solutions from the four IA columns were 107 ± 7% (6.5%), 122 ± 14% (12%), and 114 ± 9% (8.0%) respectively, based on enzyme-linked immunosorbent assay (ELISA) data. The maximum loading was approximately 700 ng of atrazine for each IA column (∼0.16 μg of atrazine per mg of antibody). The IA columns could withstand 100% methanol as the elution solvent and could be reused more than 50 times with no change in performance. The IA columns were challenged with soil, sediment, and duplicate-diet food samples and effectively removed interferences from these various matrices for subsequent gas chromatography/mass spectrometry (GC/MS) or ELISA analysis. The log-transformed ELISA and GC/MS data were significantly correlated for soil, sediment and food samples although the ELISA values were slightly higher than those obtained by GC/MS. The IA column cleanup procedure coupled with ELISA analysis could be used as an alternative effective analytical method for the determination of atrazine in complex sample media such as soil, sediment, and food samples.