Diffusion effects on the interfacial tension of immiscible polymer blends

Most methods of measuring the interfacial tension between two immiscible polymers are based on the analysis of the shape that a drop of one polymer immersed in the other one exhibits under the action of flow or gravity. In such a situation, the small, yet nonzero mutual solubility between the two polymers acts toward mass transfer between the drop and the surrounding fluid. In this work, diffusion effects on the interfacial tension of the pair polyisobutylene/polydimethylsiloxane have been investigated by drop deformation under shear flow. When the drop was made of polyisobutylene, drop size decreased with time due to diffusion. Drop shrinkage was associated with a significant increase in interfacial tension, until an apparent plateau value was reached. The effect was attributed to a selective migration of molecular weights, which would act to enrich the drop with higher molar mass material. To support such an interpretation, drop viscosity was evaluated by drop shape analysis and it was actually found to increase with time. In some cases, the ratio between drop and continuous phase viscosity became higher than the critical value for drop breakup in shear flow. Upon inverting the phases (i.e., when the drop was made of polydimethylsiloxane), no significant transient effects were observed. In the light of these results, the problem of what are the correct values of interfacial tension and viscosity ratio for a polymer blend of a certain composition will also be discussed. Received: 25 January 1999 Accepted: 24 May 1999     

Synthesis of core‐shell structured carboxylated microparticles with a straightforward procedure and their evaluation as a polymer support

Poly(trimethylolpropane trimethacrylate) microspheres with a narrow size distribution were obtained by precipitation polymerization. They were subsequently modified by surface grafting with acrylic acid in a polar ethanol–water reaction medium, without stabilizer, yielding core‐shell particles with diameters in the micrometer range. The resulting polymeric material was characterized by SEM and potentiometric titration, FTIR spectroscopy, and thermal analysis. It was shown that the particle characteristics (size, size distribution, and functionality) obtained by this straightforward procedure can be controlled by modifying the synthesis parameters (monomer concentration, agitation rate, and temperature). The high functionality, the chemical and physico‐mechanical stability, as well as the possibility to control the performances of the resulting polymeric materials by synthesis allow its applications in various areas. Envisaging separation and catalysis domains, Cu(II), Cd(II), and Cr(III) uptake capacity from aqueous solutions was investigated under noncompetitive conditions as a function of synthesized particle functionality, time, and pH range. It was also found that the addition of the carboxylated microparticles to polyethylene stabilized with α‐tocopherol improved the thermo‐oxidative behaviour of the polymeric material. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5889–5898, 2005     

Experimental investigation of ice slurry flow pressure drop in horizontal tubes

Pressure drop behaviour of ice slurry based on ethanol–water mixture in circular horizontal tubes has been experimentally investigated. The secondary fluid was prepared by mixing ethyl alcohol and water to obtain initial alcohol concentration of 10.3% (initial freezing temperature ?4.4 °C). The pressure drop tests were conducted to cover laminar and slightly turbulent flow with ice mass fraction varying from 0% to 30% depending on test conditions. Results from flow tests reveal much higher pressure drop for higher ice concentrations and higher velocities in comparison to the single phase flow. However for ice concentrations of 15% and higher, certain velocity exists at which ice slurry pressure drop is same or even lower than for single phase flow. It seems that higher ice concentration delay flow pattern transition moment (from laminar to turbulent) toward higher velocities. In addition experimental results for pressure drop were compared to the analytical results, based on Poiseulle and Buckingham–Reiner models for laminar flow, Blasius, Darby and Melson, Dodge and Metzner, Steffe and Tomita for turbulent region and general correlation of Kitanovski which is valid for both flow regimes. For laminar flow and low buoyancy numbers Buckingham–Reiner method gives good agreement with experimental results while for turbulent flow best fit is provided with Dodge–Metzner and Tomita methods.Furthermore, for transport purposes it has been shown that ice mass fraction of 20% offers best ratio of ice slurry transport capability and required pumping power.     

‘Morphs’ (MRFs): metal-reversible folding domains for differential IgG binding

BACKGROUND: Selective recognition and binding of IgG molecules is the basis for a host of immunological and affinity purification techniques. Capture of an IgG in these procedures relies chiefly on its interaction with one of a variety of reengineered bacterial receptors which bind to the Fc region of IgG molecules with very high affinity. While this interaction is extremely efficient in trapping IgG molecules, the tight interaction between the binding partners often requires denaturing conditions for disruption of the complex, which can adversely affect the yield of purified IgG and also limit the lifetime of the receptor matrix. An effective receptor/IgG binding system which could be modulated by less extreme conditions is of considerable general interest. RESULTS: We describe the properties of a series of modified Fc receptor domains which are competent to bind IgG with high affinity but which can be reversibly unfolded upon addition of modest amounts of transition metal ions. Data are presented demonstrating loss of the secondary structural content of the domains as a function of increasing metal concentration, with a concomitant decrease in IgG binding affinity. Variants of the Fc receptor differing at a single amino acid position display increased sensitivity to metal-induced unfolding, while retaining comparable IgG binding ability in the absence of metal. CONCLUSIONS: The interaction of this series of Fc receptors with metal ions abolishes IgG binding, but removal of metal ions allows refolding of the domains with restoration of the IgG binding function. Examples of the utility and potential applications of these metal-modulated IgG binding domains are discussed.     

An algorithm for ordinal sorting based on ELECTRE with categories defined by examples

This work proposes a Progressive Assisted Sorting Algorithm (PASA) based on a multicriteria evaluation ELECTRE-type method. The purpose of the PASA is to aid a decision maker to progressively sort a set of alternatives into a set of categories, which we considered are ordered (ordinal sorting), following a consistency principle. We consider the principle that if an alternative outranks (is as good as) a second one, then it must belong to the same category or to a better category. The set of alternatives already sorted by the decision maker will implicitly define the categories, and will constrain the range of categories where other alternatives may be sorted. We show how the same idea may be used in an aggregation/disaggregation approach, considering some parameters of ELECTRE are not fixed a priori, but are constrained only by the examples provided. In this context, we establish a “convex-shape property” stating that the range of possible categories for an alternative is always an interval of categories. A discussion contrasting this approach with ELECTRE TRI is included in the conclusions.