The importance of particle type selection and temperature control for on-chip free-flow magnetophoresis

Free-flow magnetophoresis is becoming a popular technique for the separation and manipulation of magnetic particles and materials in microsystems. A wide variety of magnetic particles are commercially available that differ greatly in size and in magnetic properties. To investigate the suitability of different particle types for magnetophoretic operations in microfluidic devices, we compared a range of particles from three manufacturers by pumping them through a microfluidic separation chamber and deflecting them from the direction of laminar flow by applying an external magnetic field. The on-chip deflection of particles was compared to data provided by the manufacturers and magnetisation data obtained from vibrating sample magnetometer (VSM) measurements. Additionally, the extent of deflection was examined over a range of temperatures. Deflection distances were found to increase significantly with increasing temperature. Further to this, a separation of 2.8 and 1.0 μm magnetic particles was performed at different temperatures. Separation resolution was found to improve at higher temperatures. Hence, temperature manipulation provides a simple and effective means for improving a magnetic separation or for controlling the angle at which a particle is deflected from its hydrodynamic flow path.     

Highly Asymmetric Phase Diagram of a Poly(1,2‐octylene oxide)–Poly(ethylene oxide) Diblock Copolymer System Comprising a Brush‐Like Poly(1,2‐octylene oxide) Block

The phase diagram of a series of poly(1,2‐octylene oxide)–poly(ethylene oxide) (POO–PEO) diblock copolymers is determined by small‐angle X‐ray scattering. The Flory–Huggins interaction parameter was measured by small‐angle neutron scattering. The phase diagram is highly asymmetric due to large conformational asymmetry that results from the hexyl side chains in the POO block. Non‐lamellar phases (hexagonal and gyroid) are observed near f_PEO = 0.5, and the lamellar phase is observed for f_PEO ≥ 0.5.

     

Characterization of the nanostructure of complexes formed by a redox-active cationic lipid and DNA

We report characterization of the nanostructures of complexes formed between the redox-active lipid bis(n-ferrocenylundecyl)dimethylammonium bromide (BFDMA) and DNA using small-angle neutron scattering (SANS) and cryogenic transmission electron microscopy (cryo-TEM). A particular focus was directed to the influence of lipid oxidation state (where reduced BFDMA has a net charge of +1 and oxidized BFDMA has a charge of +3) on the nanostructures of the solution aggregates formed. Complexes were characterized over a range of charge ratios of reduced BFDMA to DNA (1.1:1, 2.75:1, and 4:1) in solutions of 1 mM Li2SO4. For these complexes, a single peak in the SANS data at 1.2 nm(-1) indicated that a nanostructure with a periodicity of 5.2 nm was present, similar to that observed with complexes of the classical lipids DODAB/DOPE and DNA (multilamellar spacing of 7.0 nm). The absence of additional Bragg peaks in all the SANS data indicated that the periodicity did not extend over large distances. Both inverse Fourier transform analysis and form factor fitting suggested formation of a multilamellar vesicle. These results were confirmed by cryo-TEM images in which multilamellar complexes with diameters between 50 and 150 nm were observed with no more than seven lamellae per aggregate. In contrast to complexes of reduced BFDMA and DNA, Bragg peaks were absent in SANS spectra of complexes formed by oxidized BFDMA and DNA at all charge ratios investigated. The low-q behavior of the SANS data obtained using oxidized BFDMA and DNA complexes suggested that large, loose aggregates were formed, consistent with complementary cryo-TEM images showing predominantly loose disordered aggregates. Some highly ordered spongelike and cubic phase nanostructures were also detected in cryo-TEM images. We conclude that control of BFDMA oxidation state can be used to manipulate the nanostructures of lipid-DNA complexes formed using BFDMA.     

Optimisation and characterisation of biosensors based on polyaniline

With lower limits of detection and increased stability constantly being demanded of biosensor devices, characterisation of the constituent layers that make up the sensor has become unavoidable, since this is inextricably linked with its performance. This work describe the optimisation and characterisation of two aspects of sensor performance: a conductive polymer layer (polyaniline) and the immobilised protein layer. The influence of the thickness of polyaniline films deposited electrochemically onto screen-printed electrode surfaces is described in this work in terms of its influence on a variety of amperometric sensor performance characteristics: time to reach steady state, charging current, catalytic current, background current and signal/background ratios. The influence of polymer film thickness on the conductivity and morphology of finished films is also presented.

An electrostatic method of protein immobilisation is used in this work and scanning electron microscopy in conjunction with gold-labelled antibodies and back-scattered electron detection has enabled the direct visualisation of individual groups of proteins on the sensor surface. Such information can provide an insight into the performance of sensors under influence of increasing protein concentrations.     

Divergent Synthesis of Molecular Winch Prototypes

We report the synthesis of conceptually new prototypes of molecular winches with the ultimate aim to investigate the work performed by a single ruthenium-based molecular motor anchored on a surface by probing its ability to pull a load upon electrically-driven directional rotation. According to a technomimetic design, the motor was embedded in a winch structure, with a long flexible polyethylene glycol chain terminated by an azide hook to connect a variety of molecular loads. The structure of the motor was first derivatized by means of two sequential cross-coupling reactions involving a penta(4-halogenophenyl)cyclopentadienyl hydrotris(indazolyl)borate ruthenium(II) precursor and the resulting benzylamine derivative was next exploited as key intermediate in the divergent synthesis of a family of nanowinch prototypes. A one-pot method involving sequential peptide coupling and Cu-catalyzed azide-alkyne cycloaddition was developed to yield four loaded nanowinches, with load fragments encompassing triptycene, fullerene and porphyrin moieties.     

Does a Photocatalytic Synergy in an Anatase–Rutile TiO2 Composite Thin‐Film Exist?

It has often been suggested that anatase–rutile mixtures/composites synergistically enhance photocatalysis. However, in the case of dense thin‐films containing an intimate mix of both anatase and rutile phases, such an effect has not been observed. In synthesising combinatorial films with graded film thickness and phase, and applying established photocatalytic mapping methods, we were able to assess how dense thin‐films of intimately mixed anatase–rutile mixtures affect photocatalytic performance. We found that no photocatalytic synergy between anatase–rutile composites (29≤rutile %≤83) within such dense thin‐film systems exists. In fact, an increased presence of rutile caused the photocatalytic activity to fall. This was explained by the unfavourable energetics in the multiple electron transfers required between several neighbouring rutile and anatase sites for the photo‐generated electron to reach the material’s surface; encouraging the trapping of electrons within the bulk and increasing the likelihood of charge recombination. The decrease in photocatalytic activity was found to vary linearly with rutile component.     

Surface Plasmon Resonance Biosensors Incorporating Gold Nanoparticles

SPR biosensing is increasingly popular for the detection of a multitude of biomolecules. It offers label‐free detection and study of proteins, nucleic acids, and other biomolecules in real time. A recent trend involves incorporation of AuNPs, either within the sensing surface itself or as signal enhancing tagging molecules. The importance of AuNP and detecting agent spacing is described and techniques using macromolecular spacing aids are highlighted. Recent methods to enhance SPR detection capabilities using gold nanoparticles are reviewed, as well as device fabrication and the results of incorporation. SPR detection is a highly versatile method for the detection of biomolecules and, with the incorporation of AuNPs, shows promise in extending it to a number of new applications.

     

A high-frequency and high-field EPR study of new azide and fluoride mononuclear Mn(III) complexes

The isolation, structural characterization and electronic properties of three new six-coordinated Mn(III) complexes, [Mn(bpea)(F)(3)] (1), [Mn(bpea)(N(3))(3)] (2), and [Mn(terpy)(F)(3)] (3) are reported (bpea = N,N-bis(2-pyridylmethyl)-ethylamine; terpy = 2,2':6',2' '-terpyridine). As for [Mn(terpy)(N(3))(3)] (4) (previously described by Limburg J.; Vrettos J. S.; Crabtree R. H.; Brudvig G. W.; de Paula J. C.; Hassan A.; Barra A-L.; Duboc-Toia C.; Collomb M-N. Inorg. Chem. 2001, 40, 1698), all these complexes exhibit a Jahn-Teller distortion of the octahedron characteristic of high-spin Mn(III) (S = 2). The analysis of the crystallographic data shows an elongation along the tetragonal axis of the octahedron for complexes 1 and 3, while complex 2 presents an unexpected compression. The electronic properties were investigated using a high-field and high-frequency EPR study performed between 5 and 15 K (190-575 GHz). The spin Hamiltonian parameters determined in solid state are in agreement with the geometry of the complexes observed in the crystal structures. A negative D value found for 1 and 3 is related to the elongated tetragonal distortion, whereas the positive D value determined for 2 is in accordance with a compressed octahedron. The high E/D values, in the range of 0.103 to 0.230 for all complexes, are correlated with the highly distorted geometry present around the Mn(III) ion. HF-EPR experiments were also performed on complex 1 in solution and show that the D value is the only spin Hamiltonian parameter which is slightly modified compared to the solid state (D = -3.67 cm(-1) in solid state; D = -3.95 cm(-1) in solution).     

Photosensitization of DNA damage by a new cationic pyropheophorbide derivative: sequence-specific formation of a frank scission

Pyropheophorbides are red-absorbing porphyrin-like photosensitizers that may interact with DNA either by intercalation or by external binding with self-stacking according to the value of the nucleotide to chromophore molar ratio (N/C). This article reports on the nature and sequence selectivity of the DNA damage photoinduced by a water-soluble chlorhydrate of aminopyropheophorbide. First, this pyropheophorbide is shown to induce on irradiation the cleavage of phiX174 DNA by both Type-I and -II mechanisms, suggested by scavengers and D2O effects. These conclusions are then improved by sequencing experiments performed on a 20-mer oligodeoxynucleotide (ODN) irradiated at wavelengths >345 nm in the presence of the dye, N/C varying from 2.5 to 0.5. Oxidation of all guanine residues to the same extent is observed after piperidine treatment on both single- and double-stranded ODN. Moreover, unexpectedly, a remarkable sequence-selective cleavage occurring at a 5'-CG-3' site is detected before alkali treatment. This frank break is clearly predominant for a low nucleotide to chromophore molar ratio, corresponding to a self-stacking of the dye along the DNA helix. The electrophoretic properties of the band suggest that this lesion results from a sugar oxidation, which leads via a base release to a ribonolactone residue. The proposal is supported by high-performance liquid chromatography-matrix-assisted laser desorption-ionization mass spectrometry experiments that also reveal other sequence-selective frank scissions of lower intensity at 5'-GC-3' or other 5'-CG-3' sites. This sequence selectivity is discussed with regard to the binding selectivity of cationic porphyrins.     

Stereoselective association of binuclear metallacycles in coordination polymers

A series of structurally related binuclear metallacycles [Cd(NO(3))(2)L](2), where L is an angular exo-bidentate ligand, have been synthesized. Each metallacycle contains two coordinatively unsaturated, chiral metal centers within a single molecule, and the assembly of these metallacycles into polymeric framework structures has been studied systematically for the first time. Stereoselective homochiral association of [Cd(NO(3))(2)L](2) leads to the formation of helical coordination polymers, whereas meso type association results in nonhelical chain structures. The type of stereoselective aggregation depends on the conditions of self-assembly as well as on ligand functionality. Both helical and nonhelical polymeric complexes have been isolated for the metallacycle [Cd(NO(3))(2)(2,4'-pyacph)](2) (2,4'-pyacph = 2,4'-(4-ethynylphenyl)bipyridyl). Homochiral association results in the formation of helical [Cd(NO(3))]( infinity ) chains which link the binuclear [Cd(NO(3))(2)(2,4'-pyacph)](2) metallacycles into racemic two-dimensional sheets which contain both P and M [Cd(NO(3))]( infinity ) helices. In contrast, meso-association leads to the formation of nonhelical one-dimensional chains. It is shown that the product of homochiral association is predominately formed at room temperature and that of meso-association is generated at elevated temperatures. Thus, it may be concluded that the homochiral association appears to be energetically less favorable than the meso-association, a conclusion that has been confirmed by theoretical calculations of the crystal lattice energy. Several high-yield syntheses of bipyridyl-type ligands used for metallacyclic assembly are also reported.