Synthesis and properties of water-soluble gold colloids covalently derivatized with neutral polymer monolayers

Citrate-capped gold nanoparticles as well as planar gold surfaces can be efficiently grafted with a covalently attached polymer monolayer a few nanometers thick, by simple contact of the metal surface with dilute aqueous solutions of hydrophilic polymers that are end-capped with disulfide moieties, as shown by UV/vis absorption, dynamic light scattering, and surface plasmon resonance studies. The hydrophilic polymer-coated gold colloids can be freeze-dried and stored as powders that can be subsequently dissolved to yield stable aqueous dispersions, even at very large concentrations. They allow for applying filtrations, gel permeation chromatography, or centrifugation. They do not suffer from undesirable nonspecific adsorption of proteins while allowing the diffusion of small species within the hydrogel surface coating. In addition, specific properties of the original hydrophilic polymers are retained such as a lower critical solution temperature. The latter feature could be useful to enhance optical responses of functionalized gold surfaces toward interaction with various substrates.     

The synthesis and electronic structure of a novel [NiS4Fe2(CO)6] radical cluster: implications for the active site of the [NiFe] hydrogenases

A novel [NiS4Fe2(CO)6]cluster (1: 'S(4)'=(CH(3)C(6)H(3)S(2))(2)(CH(2))(3)) has been synthesised, structurally characterised and has been shown to undergo a chemically reversible reduction process at -1.31 V versus Fc(+)/Fc to generate the EPR-active monoanion 1(-). Multifrequency Q-, X- and S-band EPR spectra of (61)Ni-enriched 1(-) show a well-resolved quartet hyperfine splitting in the low-field region due to the interaction with a single (61)Ni (I=3/2) nucleus. Simulations of the EPR spectra require the introduction of a single angle of non-coincidence between g(1) and A(1), and g(3) and A(3) to reproduce all of the features in the S- and X-band spectra. This behaviour provides a rare example of the detection and measurement of non-coincidence effects from frozen-solution EPR spectra without the need for single-crystal measurements, and in which the S-band experiment is sensitive to the non-coincidence. An analysis of the EPR spectra of 1(-) reveals a 24 % Ni contribution to the SOMO in 1(-), supporting a delocalisation of the spin-density across the NiFe(2) cluster. This observation is supported by IR spectroscopic results which show that the CO stretching frequencies, nu(CO), shift to lower frequency by about 70 cm(-1) when 1 is reduced to 1(-). Density functional calculations provide a framework for the interpretation of the spectroscopic properties of 1(-) and suggest that the SOMO is delocalised over the whole cluster, but with little S-centre participation. This electronic structure contrasts with that of the Ni-A, -B, -C and -L forms of [NiFe] hydrogenase in which there is considerable S participation in the SOMO.     

Direct zonal liquid chromatographic method for the kinetic study of actinomycin-DNA binding

The binding of an anticancer drug (actinomycin D or ACTD) to double-stranded DNA (dsDNA) was studied by means of high-performance liquid chromatography (HPLC). ACTD is an antitumor antibiotic containing one chromophore group and two pentapeptidic lactone cycles that binds dsDNA. Incubations of ACTD with DNA were performed at physiological pH. The complexed and free ligand concentrations of the mixture were quantified at 440 nm from their separation on a size-exclusion chromatographic (SEC) column using the same buffer for the elution and the sample incubation. The DNA and the ACTD-DNA complexes were eluted at the column exclusion volume while the ligand was retained on the support. An apparent binding curve was obtained by plotting the amount emerging at the exclusion column volume against that eluted at free ACTD retention volume. A dissociating effect was evidenced and the binding parameters were significantly different from those obtained at equilibrium by visible absorbance titration. The equilibrium binding parameters determined by absorption spectroscopy were used as starting data in the numerical simulations of the chromatographic process. The results showed a strong dependency of the apparent binding parameters on the reaction kinetics. Finally the comparison of the apparent binding curve obtained from the HPLC experiments and from the numerical simulations permitted an evaluation of the dissociation rate constant (kd = 0.004 s(-1)).     

Co-ordination chemistry of amino pendant arm derivatives of 1,4,7-triazacyclononane

The binding properties of 1,4,7-triazacyclononane ([9]aneN3) to metal cations can be adapted through sequential functionalisation of the secondary amines with aminoethyl or aminopropyl pendant arms to generate ligands with increasing numbers of donor atoms. The new amino functionalised pendant arm derivative of 1,4,7-triazacyclononane ([9]aneN3), L1, has been synthesised and its salt [H2L1]Cl2 characterised by X-ray diffraction. The protonation constants of the ligands L1-L4 having one, two or three aminoethyl or three aminopropyl pendant arms, respectively, on the [9]aneN3 framework, and the thermodynamic stabilities of their mononuclear complexes with CuII and ZnII have been investigated by potentiometric measurements in aqueous solutions. In order to discern the protonation sites of ligands L1-L4, 1H NMR spectroscopic studies were performed in D2O as a function of pH. While the stability constants of the CuII complexes increase on going from L1 to L2 and then decrease on going from L2 to L3 and L4, those for ZnII complexes increase from L1 to L3 and then decrease for L4. The X-ray crystal structures of the complexes [Cu(L1)(Br)]Br, [Zn(L1)(NO3)]NO3, [Cu(L2)](ClO4)2, [Ni(L2)(MeCN)](BF4)2, [Zn(L4)](BF4)2.MeCN and [Mn(L4)](NO3)2.1/2H2O have been determined. In both [Cu(L1)(Br)]Br and [Zn(L1)(NO3)]NO3 the metal ion is five co-ordinate and bound by four N-donors of the macrocyclic ligand and by one of the two counter-anions. The crystal structures of [Cu(L2)](ClO4)2 and [Ni(L2)(MeCN)](BF4)2 show the metal centre in slightly distorted square-based pyramidal and octahedral geometry, respectively, with a MeCN molecule completing the co-ordination sphere around NiII in the latter. In both [Zn(L4)](BF4)2.MeCN and [Mn(L4)](NO3)2.1/2H2O the metal ion is bound by all six N-donors of the macrocyclic ligand in a distorted octahedral geometry. Interestingly, and in agreement with the solution studies and with the marked preference of CuII to assume a square-based pyramidal geometry with these types of ligands, the reaction of L4 with one equivalent of Cu(BF4)2.4H2O in MeOH at room temperature yields a square-based pyramidal five co-ordinate CuII complex [Cu(L6)](BF4)2 where one of the three propylamino pendant arms of the starting ligand has been cleaved to give L6.     

Characterization of low-molecular weight peptides in champagne wine by liquid chromatography/tandem mass spectrometry

This paper reports the use of an on-line LC–ESI–MS/MS method for the identification and quantification of di- and tripeptides in champagne wine without laborious sample pretreatment. The identification of these compounds, in their underivatised form, is based on identical retention times and ESI–MS spectra to those of reference standards. The presence of nine dipeptides (Arg–Ile, Ile–Arg, Ile–Val, Lys–Phe, Lys–Tyr, Phe–Lys, Tyr–Gln, Tyr–Lys, Val–Ile) and the absence of two tripeptides (Phe–Arg–Arg and Lys–Met–Asn) have been evidenced in the matrix. Calibration curves for each analyte were established using Phe–Arg as internal standard. The calibration curves were linear in the concentration range 0.1–10 mg L⁻¹ with a determination coefficient, r², better than 0.992. The accuracy for the calibration standard was estimated at between 92 and 102%. This method allows high recovery and satisfies the necessary requirements with respect to accuracy, repeatability and sensitivity. The first application of this analytical method to the measurement of di- and tri-peptides in different vintages of champagne wine is reported. Compositional changes in the peptides occurred depending on the vintage.     

Total synthesis and structural elucidation of ent-micropyrone and (+)-ascosalipyrone

The total synthesis of 6-[(1S,3S)-1,3-dimethyl-2-oxopentyl]-4-hydroxy-3,5-dimethyl-2H-pyran-2-one (22), the enantiomer of the natural product micropyrone (1), was achieved in 9 linear steps (10% overall yield), from Evans auxiliary (R)-12 with key coupling of the dianion of dione 17 and aldehyde 11. Formation of the pyrone ring and subsequent oxidation at C7 was achieved without epimerization of the sensitive position α to both the pyrone ring and the carbonyl. The same sequence using the alternate dione 24 achieved the total synthesis of 6-[(1S,3S)-1,3-dimethyl-2-oxopentyl]-4-hydroxy-3-methyl-2H-pyran-2-one (28), the (+)-enantiomer of the natural product, ascosalipyrone (2). In both cases diastereomeric aldehydes 11 and 16 were taken through the synthetic sequence to give two possible diastereomers of the natural products. Comparison of the (1)H and (13)C NMR data for the synthetic isomers with that reported for the natural products determined their relative stereochemistry. Comparison of the optical rotation obtained for 22 established it to be the enantiomer of micropyrone.     

A Monte Carlo error estimator for the expansion of rigid-rotor potential energy surfaces

The computation of rotational energy transfer in nonreactive molecular collisions requires expanding the orientation dependence of the interaction potential over an appropriate complete set of orthonormal functions. We show that the use of random grids for the sampling of the angular geometries combined with the Monte Carlo theorem allows to estimate the mean accuracy on each expansion term determined by a least squares fit. The interest of our approach is illustrated by an application to the H₂O–H₂ system, of great astrophysical interest.     

Controllable self-assembly of organic-inorganic amphiphiles containing Dawson polyoxometalate clusters

An organic-inorganic molecular hybrid containing the Dawson polyoxometalate, ((C(4)H(9))(4)N)(5)H[P(2)V(3)W(15)O(59)(OCH(2))(3)CNHCOC(15)H(31)], was synthesized and its surfactant-like amphiphilic properties, represented by the formation of bilayer vesicles, were studied in polar solvents. The vesicle size decreases with both decreasing hybrid concentration and with increasing polarity of the solvent, independently. The self-assembly behavior of this hybrid can be controlled by introducing different counterions into the acetonitrile solutions. The addition of ZnCl(2) and NaI can cause a gradual decrease and increase of vesicular sizes, respectively. Tetraalkylammonium bromide is found to disassemble the vesicle assemblies. Moreover, the original counterions of the hybrid can be replaced with protons, resulting in pH-dependent formation of vesicles in aqueous solutions. The hybrid surfactant can further form micro-needle structures in aqueous solutions upon addition of Ca(2+) ions.